Business

Selleys Polyglaze Liquid Polish - 500mL Product 06 product guide

AI Summary

Product: Selleys Polyglaze Liquid Polish Brand: Selleys (a division of DuluxGroup Australia Pty Ltd) Category: Automotive Car Polish / Vehicle Detailing Primary Use: A water-soluble liquid car polish designed to deliver a clean, professional finish on vehicle surfaces for both DIY and professional detailing applications.

Quick facts

  • Best for: DIY home users and professional automotive detailers
  • Key benefit: Non-hazardous, easy-to-use formula that delivers a superior polished finish without specialist handling or storage requirements
  • Form factor: White liquid, 500mL bottle, viscosity greater than 20.5 mm²/s at 40°C
  • Application method: Apply to a clean dry surface with a foam pad or microfibre cloth using circular motions, then buff off with a clean dry cloth

Common questions this guide answers

  1. Is Selleys Polyglaze Liquid Polish classified as hazardous or Dangerous Goods? → No — it is not classified as hazardous under Safe Work Australia GHS 7, and not classified as Dangerous Goods for road, rail, marine, or air transport.
  2. What PPE is required when using Polyglaze Liquid Polish? → Nitrile rubber gloves, safety glasses, overalls, and safety shoes.
  3. What should you do if Polyglaze Liquid Polish is accidentally swallowed? → Do not induce vomiting; rinse mouth with water; give a glass of water; seek medical advice; contact the Australian Poisons Information Centre on 131 126.

Product overview

Selleys Polyglaze Liquid Polish is a water-soluble liquid car polish designed to deliver a clean, professional finish on vehicle surfaces. Made by Selleys, a division of DuluxGroup Australia Pty Ltd, it works equally well for DIY home users and professional detailers. It comes in a 500mL bottle as a white liquid with a viscosity greater than 20.5 mm²/s at 40°C — thick enough to spread evenly across surfaces without running or pooling during application.

This guide covers what Polyglaze Liquid Polish is, how to use it, what precautions to take, and how to store and handle it correctly.

Key product characteristics

Form and consistency

Polyglaze Liquid Polish is a white liquid that dissolves in water. Its viscosity, measured at greater than 20.5 mm²/s at 40°C, gives it a moderately thick consistency. Viscosity measures a fluid's resistance to flow — a higher viscosity means the product stays where you put it, resisting drips and runs when applied to a vertical surface like a car door. The result is clean, controlled application without product waste.

Formulation and safety classification

Polyglaze Liquid Polish has a straightforward safety profile. The product is:

  • Not classified as hazardous under the Safe Work Australia Globally Harmonised System (GHS) 7 framework, the current national standard for chemical hazard classification in Australia.
  • Not classified as Dangerous Goods for transport by road, rail, marine, or air.

This means the product carries none of the special handling, labelling, or storage requirements that come with hazardous chemicals. For everyday users, that means straightforward purchasing, home storage, and disposal with no specialist knowledge required. For businesses, it keeps logistics simple and compliance obligations manageable.

How to use Polyglaze Liquid Polish

Application method

Polyglaze Liquid Polish is applied directly to the vehicle surface. Always follow the instructions on the product label for specific guidance. The process is straightforward:

  1. Make sure the vehicle surface is clean and free of loose dirt before you start.
  2. Apply a small amount of liquid polish to an applicator pad or soft cloth.
  3. Work the polish into the surface using circular or overlapping motions.
  4. Buff off the residue with a clean, dry cloth to reveal a polished finish.

Because the product is water-soluble, applicator cloths and tools clean up with water.

Surface preparation

Wash and dry the vehicle surface before polishing. Applying polish to a dirty surface risks trapping abrasive particles between the applicator and the paintwork, which can cause fine scratches. A clean, dry surface gives Polyglaze Liquid Polish the right conditions to perform well.

Safety precautions and personal protective equipment

Required PPE

Even though Polyglaze Liquid Polish is not classified as hazardous, responsible use still means wearing the right personal protective equipment (PPE):

  • Safety shoes protect against spills or dropped containers.
  • Overalls keep clothing and skin clear of incidental contact during use.
  • Nitrile rubber gloves are recommended for intermittent contact with the product. Nitrile rubber is a synthetic material that resists a wide range of chemicals, making it a reliable choice for general workshop or detailing use.
  • Safety glasses protect eyes from splashes, particularly when applying or buffing the product at close range.

Eye and skin contact

If the product contacts the eyes, rinse immediately with clean water. Keeping an eyewash station or clean water source within reach during use is a sensible habit in any workshop.

For skin contact, wash the affected area with soap and water.

If swallowed

In the event of accidental ingestion:

  • Rinse the mouth with water.
  • Do not induce vomiting.
  • Give the affected person a glass of water to drink.
  • Seek medical advice promptly.
  • Contact the Australian Poisons Information Centre on 131 126.

The instruction not to induce vomiting matters — doing so can cause additional harm by bringing the substance back into contact with the throat and mouth.

Ventilation

When using any polish in an enclosed space such as a garage, open doors or windows to keep air moving during and after application. Good ventilation is a simple habit that supports a safe working environment.

Storage and handling

Storage conditions

As a non-hazardous product, Polyglaze Liquid Polish needs no specialised storage infrastructure. Follow these practices:

  • Store in a cool, dry location away from direct sunlight and heat sources.
  • Keep the container tightly sealed when not in use to prevent the product from drying out or becoming contaminated.
  • Store out of reach of children and pets.
  • Keep the product in its original container with the label intact so that safety and usage information stays accessible when you need it.

Transport

Because Polyglaze Liquid Polish is not classified as Dangerous Goods for road, rail, marine, or air transport, it moves without special declarations, placards, or packaging requirements — straightforward for retailers, distributors, and consumers alike.

Disposal

As a water-soluble, non-hazardous product, disposal follows local council guidelines for liquid household or automotive care products. Do not pour unused product directly into stormwater drains. Check with your local council or waste facility for guidance on disposing of automotive care liquids.

Rinse empty containers and dispose of them in line with local recycling or waste guidelines.

Tips for best results

  • Work in the shade. Applying polish in direct sunlight or on a hot surface causes the product to dry too quickly, making it harder to buff off evenly.
  • Use the right applicator. A foam applicator pad or microfibre cloth delivers even product distribution and avoids streaking.
  • Start with less product than you think you need. Too much at once makes buffing harder and can leave residue. Build up gradually.
  • Buff while the product is still workable. Work in small sections so you stay ahead of the product before it hardens.
  • Use clean cloths. A dirty or contaminated buffing cloth introduces scratches and undoes your work. Fresh cloths for every session protect the quality of the finish.

Regulatory and compliance context

Understanding Polyglaze Liquid Polish's compliance with Safe Work Australia GHS 7 matters for users in regulated environments such as automotive workshops or fleet maintenance operations.

GHS, the Globally Harmonised System of Classification and Labelling of Chemicals, is an internationally agreed framework that standardises how chemicals are classified and communicated. Safe Work Australia adopted GHS 7 as the applicable standard for workplace chemicals in Australia. A product assessed as not classified as hazardous under this system has been evaluated and confirmed as not meeting the criteria for physical, health, or environmental hazard classifications.

For workplace health and safety (WHS) compliance in Australia, this means Polyglaze Liquid Polish does not trigger the more stringent requirements that apply to hazardous chemicals, such as mandatory Safety Data Sheet (SDS) registers, specific risk assessments, or exposure monitoring. Standard safe handling practices and the PPE outlined above remain the right approach and are fully recommended.

References

Frequently asked questions

What is Selleys Polyglaze Liquid Polish: A water-soluble liquid car polish

Who manufactures Polyglaze Liquid Polish: Selleys, a division of DuluxGroup Australia Pty Ltd

What size does Polyglaze Liquid Polish come in: 500mL bottle

What colour is Polyglaze Liquid Polish: White

Is Polyglaze Liquid Polish water-soluble: Yes

What is the viscosity of Polyglaze Liquid Polish: Greater than 20.5 mm²/s at 40°C

What does higher viscosity mean for application: Product stays in place, resisting drips and runs

Is Polyglaze Liquid Polish suitable for DIY use: Yes

Is Polyglaze Liquid Polish suitable for professional detailing: Yes

Is Polyglaze Liquid Polish classified as hazardous: No

What safety standard classifies Polyglaze as non-hazardous: Safe Work Australia GHS 7

Is Polyglaze Liquid Polish classified as Dangerous Goods for transport: No

Does Polyglaze Liquid Polish require special handling requirements: No

Does Polyglaze Liquid Polish require specialist storage facilities: No

What surface should Polyglaze be applied to: Clean, dry vehicle surfaces

Should the vehicle be washed before applying Polyglaze: Yes

Why must the surface be clean before polishing: To prevent trapping abrasive particles that cause scratches

What applicator should be used with Polyglaze Liquid Polish: Foam applicator pad or soft cloth

What motion should be used when applying Polyglaze: Circular or overlapping motions

How do you remove Polyglaze polish residue: Buff off with a clean, dry cloth

How do you clean applicator tools after use: Rinse with water

Is it safe to apply Polyglaze in direct sunlight: No

Why should Polyglaze not be applied in direct sunlight: Heat causes product to dry too quickly

Where should Polyglaze be applied for best results: In the shade

Should you use a large or small amount of product per application: Start with a small amount

Why use less product per application: Excess product makes buffing harder and leaves residue

Should Polyglaze be allowed to fully harden before buffing: No

Why buff before the product fully hardens: To achieve an even finish

Should sections be worked one at a time: Yes

Why use clean buffing cloths: Dirty cloths introduce scratches to the surface

What PPE gloves are recommended for Polyglaze use: Nitrile rubber gloves

Why are nitrile rubber gloves recommended: Nitrile resists a wide range of chemicals

Is eye protection required when using Polyglaze: Yes, safety glasses

Why are safety glasses recommended: Protection from splashes during application or buffing

Are overalls recommended when using Polyglaze: Yes

What is the purpose of wearing overalls: Keeps clothing and skin clear of incidental contact

Are safety shoes recommended when using Polyglaze: Yes

What is the purpose of safety shoes during use: Protection against spills or dropped containers

What should you do if Polyglaze contacts your eyes: Rinse immediately with clean water

What should you do if Polyglaze contacts your skin: Wash with soap and water

Should vomiting be induced if Polyglaze is swallowed: No

What should be given if Polyglaze is swallowed: A glass of water

What should be done after giving water if Polyglaze is swallowed: Seek medical advice promptly

What Australian number should be called if Polyglaze is ingested: 131 126

What is 131 126: Australian Poisons Information Centre

Is ventilation required when using Polyglaze indoors: Yes

How should ventilation be achieved indoors: Open doors or windows during and after application

Where should Polyglaze be stored: Cool, dry location away from direct sunlight and heat

Should the Polyglaze container be sealed when not in use: Yes

Why keep the container tightly sealed: Prevents product from drying out or becoming contaminated

Should Polyglaze be stored out of reach of children: Yes

Should Polyglaze be stored out of reach of pets: Yes

Should Polyglaze be kept in its original container: Yes

Why keep Polyglaze in its original container: Safety and usage information remains accessible

Does Polyglaze require special transport declarations: No

Does Polyglaze require special transport packaging: No

Can Polyglaze be transported by air without special requirements: Yes

Can Polyglaze be transported by road without special requirements: Yes

Can Polyglaze be transported by marine without special requirements: Yes

Should unused Polyglaze be poured into stormwater drains: No

How should unused Polyglaze be disposed of: Follow local council guidelines for liquid automotive care products

How should empty Polyglaze containers be disposed of: Rinse and follow local recycling or waste guidelines

Does Polyglaze trigger mandatory Safety Data Sheet register requirements in Australian workplaces: No

Does Polyglaze require specific risk assessments under Australian WHS law: No

Does Polyglaze require exposure monitoring under Australian WHS law: No

What international framework does GHS 7 align with: Globally Harmonised System of Classification and Labelling of Chemicals

What does GHS 7 non-hazardous classification confirm: Product does not meet physical, health, or environmental hazard criteria

What finish does Polyglaze Liquid Polish deliver: Clean, professional polished finish

What type of cloth is recommended for buffing Polyglaze: Microfibre cloth

Does a microfibre cloth help prevent streaking: Yes

What is the recommended applicator for even product distribution: Foam applicator pad or microfibre cloth

Label facts summary

Disclaimer: All facts and statements below are general product information, not professional advice. Consult relevant experts for specific guidance.

Verified label facts

  • Product name: Selleys Polyglaze Liquid Polish
  • Manufacturer: Selleys, a division of DuluxGroup Australia Pty Ltd
  • Pack size: 500mL bottle
  • Form: Liquid
  • Colour: White
  • Solubility: Water-soluble
  • Viscosity: Greater than 20.5 mm²/s at 40°C
  • Hazard classification: Not classified as hazardous under Safe Work Australia GHS 7
  • Dangerous Goods classification: Not classified as Dangerous Goods for transport by road, rail, marine, or air
  • Recommended PPE: Nitrile rubber gloves, safety glasses, overalls, safety shoes
  • Eye contact first aid: Rinse immediately with clean water
  • Skin contact first aid: Wash with soap and water
  • Ingestion first aid: Do not induce vomiting; rinse mouth with water; give a glass of water; seek medical advice; contact Australian Poisons Information Centre on 131 126
  • Ventilation requirement: Open doors or windows during and after use in enclosed spaces
  • Storage: Cool, dry location away from direct sunlight and heat sources; container tightly sealed when not in use; store in original container; keep out of reach of children and pets
  • Disposal: Do not pour into stormwater drains; follow local council guidelines; rinse empty containers before recycling
  • Transport: No special declarations, placards, or packaging requirements
  • WHS compliance (Australia): Does not trigger mandatory SDS register, specific risk assessments, or exposure monitoring requirements under Australian WHS law
  • GHS 7 non-hazardous confirmation: Product does not meet physical, health, or environmental hazard classification criteria
  • Emergency contact: Australian Poisons Information Centre — 131 126

General product claims

  • Delivers a clean, professional finish on vehicle surfaces
  • Suitable for both DIY home users and professional detailing applications
  • Viscosity allows product to stay in place, resisting drips and runs on vertical surfaces
  • Applying polish to a dirty surface risks trapping abrasive particles that can cause fine scratches
  • Applying in direct sunlight or on a hot surface causes the product to dry too quickly, making buffing harder
  • Working in the shade gives better control over the application process
  • A foam applicator pad or microfibre cloth delivers even product distribution and avoids streaking
  • Starting with a small amount of product makes buffing easier and reduces residue
  • Buffing before the product fully hardens produces a more even finish
  • Working in small sections helps achieve consistent results
  • Using dirty or contaminated buffing cloths can introduce scratches and reduce finish quality
  • Water-soluble formulation makes applicator cleanup straightforward
↑ Back to top