Business

Selleys Polyglaze Heavy Duty Wash & Wax Hose On 07 product guide

AI Summary

Product: Selleys Polyglaze Heavy Duty Wash & Wax Hose On Brand: Selleys, a division of DuluxGroup Australia Category: Vehicle Wash and Wax / Automotive Detailing Primary Use: Cleans and protects vehicle exteriors in a single hose-on application by combining surfactant-based washing with wax deposit protection.

Quick facts

  • Best for: Everyday vehicle owners and professional tradespeople maintaining vehicles exposed to heavy road grime, construction dust, or agricultural residue
  • Key benefit: Combines washing and waxing into one pass — no bucket, no manual mixing, no separate buffing step
  • Form factor: Blue, lemon-scented water-soluble liquid in a 2-litre container
  • Application method: Attaches directly to the hose end; dilution is controlled automatically through the dispenser

Common questions this guide answers

  1. Does this product require a separate waxing step after washing? No — the wax deposits onto the paint surface during the wash and rinse phase; no buffing required
  2. Is Selleys Polyglaze Heavy Duty Wash & Wax Hose On classified as hazardous or Dangerous Goods? No — not classified as hazardous under Safe Work Australia GHS 7, and not classified as Dangerous Goods for road, rail, air, or marine transport
  3. Where should vehicles be washed to minimise environmental impact? On grass or gravel, away from stormwater drains, using only the amount of product needed

Selleys Polyglaze Heavy Duty Wash & Wax Hose On — Complete Guide

Product overview

Selleys Polyglaze Heavy Duty Wash & Wax Hose On cleans and protects vehicle exteriors in a single application. Made by Selleys, a division of DuluxGroup Australia with over 80 years in the business, it combines washing and waxing into one step — no two-stage detailing routine required.

The product is a blue, lemon-scented liquid in a 2-litre container. It connects directly to your hose, mixes at the right dilution automatically, and gets to work straight away. That makes it practical for everyday vehicle owners and professional tradespeople who want a reliable, repeatable process without the fuss.

This guide covers everything you need to use it effectively, safely, and with confidence.

What "wash & wax" actually means

Wash and wax products handle two jobs in one pass.

Washing lifts and removes surface contaminants — dirt, road grime, bird droppings, insect residue, and dust — using surfactant chemistry that suspends particles so they rinse away cleanly, with no residue left behind.

Waxing deposits a protective layer directly onto the paint surface during the rinse phase, repelling water, reducing surface oxidation, and leaving a visible sheen.

In a traditional detailing routine, these are two separate steps with two separate products. This one handles both in a single pass — the practical choice for regular maintenance washes where the goal is keeping paint protected, not correcting it.

The "Heavy Duty" label means the formulation carries stronger cleaning capacity than standard wash products. It's built for vehicles exposed to construction dust, agricultural residue, or heavy road grime that would defeat a lighter product.

Key features and their practical benefits

Water-soluble liquid formula

This product mixes readily with water and rinses cleanly from all vehicle surfaces, leaving nothing behind. For a hose-on application, that matters — it ensures even dilution across every panel and complete removal during the rinse phase. The result is a streak-free finish with no product accumulation in panel gaps or trim areas.

Hose-on application method

The hose-on format is what sets this product apart from conventional wash products. There's no bucket, no sponge, no manual mixing. It attaches directly to your hose end and automatically mixes the concentrate at the correct ratio as it dispenses — consistent results, every time.

The practical advantages are straightforward:

  • Speed: Cover large surface areas quickly, without repeated dipping or wringing.
  • Consistency: The hose attachment controls the dilution ratio, removing the guesswork that comes with hand-mixing.
  • Accessibility: The method works for users at any skill level, from first-time washers to experienced tradespeople who value a process they can rely on.

For vehicles carrying heavy soiling, a pre-rinse or light agitation with a wash mitt on stubborn areas before the final rinse will give you the best result.

Lemon scent

The lemon scent makes the job more pleasant. It also serves a practical purpose — if the scent has noticeably faded after opening, the product may have been stored incorrectly or has degraded. Fresh scent means the formulation is performing as it should.

2-litre container size

The 2-litre container holds enough product for multiple wash sessions without constant repurchasing, and stores easily in any standard garage or laundry cupboard. See the Storage section for details on keeping the formulation in good condition.

How to use Selleys Polyglaze Heavy Duty Wash & Wax Hose On

Before you begin

Check the surface temperature. Never wash a sun-heated panel. When paint is hot to the touch, the product dries before it rinses, and water spots and streaking follow. Work in shade or during cooler parts of the day — early morning and evening are ideal.

Pre-rinse with plain water. Remove loose debris before applying the product. This protects the paint surface by preventing abrasive particles from being dragged across it during washing.

Check your hose attachment. Confirm the hose-end applicator is functioning and compatible with the product's delivery system before you start.

Application process

  1. Attach the product to your hose end as directed on the label.
  2. Apply to the vehicle surface using the hose, working in sections. Start from the roof and work downward — this keeps dirty water from running over areas you've already cleaned.
  3. Allow brief dwell time on heavily soiled surfaces. Give the surfactants time to loosen and lift contaminants before rinsing.
  4. Rinse thoroughly with clean water, again working from top to bottom. Clear all product from panel edges, door seams, and trim areas.
  5. Dry the vehicle promptly using a clean microfibre drying towel or chamois. This step matters most in hard-water areas where water spots form quickly.

After washing

The wax deposits during the wash and rinse phase — no separate buffing step required. That said, the protection it delivers is lighter than a dedicated paste or liquid wax applied and buffed separately. For vehicles that need deeper paint protection, apply a dedicated wax or sealant after washing.

Safety information

Selleys Polyglaze Heavy Duty Wash & Wax Hose On has a straightforward safety profile. Knowing the key classifications lets you handle it with appropriate care.

Hazard classification

This product is not classified as hazardous under the Safe Work Australia Globally Harmonised System (GHS) 7 framework — the Australian regulatory standard for assessing health, physical, and environmental risks of chemical substances. It does not meet threshold criteria for acute toxicity, skin corrosion, serious eye damage, respiratory sensitisation, or similar health hazards under Australian workplace chemical standards.

It is also not classified as Dangerous Goods for transport by road, rail, air, or marine routes. You can purchase it, transport it in your personal vehicle, and store it at home without the requirements that apply to flammable, corrosive, or toxic substances.

First aid measures

Even with a non-hazardous classification, standard first aid practices apply:

Eye contact: Flush immediately and thoroughly with clean running water. Seek medical advice if irritation continues. Surfactant-based products can cause temporary irritation to eye tissue even when non-hazardous — flush promptly and flush well.

Skin contact: Remove any contaminated clothing and flush the affected skin with running water. Seek medical attention if irritation develops and doesn't resolve. In most cases, skin contact causes no lasting harm, but rinsing promptly is always the right response.

Ingestion or inhalation: These scenarios are unlikely during normal use. If either occurs, seek medical advice immediately and have the product's Safety Data Sheet (SDS) available for medical personnel.

Environmental considerations

The product is not classified as hazardous for acute or chronic aquatic exposure under the GHS framework. Even so, keep wash runoff away from stormwater drains, waterways, and natural water bodies. Surfactant-based products can affect water quality and aquatic ecosystems at sufficient concentrations.

To reduce environmental impact while you work:

  • Wash vehicles on grass or gravel where water soaks into the ground rather than flowing into stormwater drains.
  • Use only the amount of product needed. Over-application doesn't improve cleaning performance — it just increases the surfactant load in runoff.
  • Check your local council guidelines. Some municipalities have specific rules about vehicle washing and stormwater management.

Storage and handling

Store the product correctly and it stays ready to use whenever you need it.

  • Store in a cool, dry, well-ventilated area away from direct sunlight. Heat and UV exposure degrade the formulation over time, reducing both cleaning and waxing performance.
  • Keep the container tightly sealed when not in use. This prevents evaporation and protects the formulation from contamination.
  • Store away from food, beverages, and animal feed as a standard precaution, even though the product is non-hazardous.
  • Keep out of reach of children. A non-hazardous classification doesn't mean the product is safe for consumption or unsupervised handling by children.

The product's regulatory reference number is SELTOLEN001531, issued 18 July 2024. Keep this on hand if you need to access the full Safety Data Sheet for workplace compliance or in the event of an incident requiring medical attention.

Tips for best results

Work in sections on larger vehicles. Apply and rinse one panel or section at a time rather than coating the entire vehicle before rinsing. This prevents the product from drying on the surface, which is the most direct path to streaking.

Use a microfibre wash mitt on stubborn areas. The hose-on method handles general cleaning quickly and efficiently. For baked-on insect residue, bird droppings, or heavy grime, light manual agitation with a clean wash mitt before rinsing gets the job done.

Rinse the hose attachment after every use. Residual product left in the hose fitting dries and blocks the applicator mechanism. A quick flush with clean water after each session keeps it working reliably.

Never apply to hot glass or hot paint. Rapid drying on heated surfaces is the main cause of streaks and water spots with hose-on wash products. When shade isn't available, work during early morning or evening hours.

Inspect the product after extended storage. Check for separation, significant odour change, or changes in colour or consistency. The product holds up well when stored correctly — any notable change in appearance is a signal to replace it before starting a wash session.

References

Frequently asked questions

What is Selleys Polyglaze Heavy Duty Wash & Wax Hose On: A combined vehicle washing and waxing product

Who manufactures this product: Selleys, a division of DuluxGroup Australia

How many years of experience does Selleys have: Over 80 years

What does this product do in one application: Cleans and protects vehicle exteriors simultaneously

What colour is the product: Blue

What scent does the product have: Lemon

What size is the container: 2 litres

What format is the application method: Hose-on

Does the product require a bucket: No

Does the product require manual mixing: No

How does the hose-on system control dilution: Automatically mixes concentrate at the correct ratio

Does the hose-on attachment control dilution ratio: Yes, automatically

What does the washing component do: Lifts and removes surface contaminants

What contaminants does it remove: Dirt, road grime, bird droppings, insect residue, and dust

How does the surfactant work: Suspends particles so they rinse away cleanly

What does the waxing component do: Deposits a protective layer onto the paint surface

What does the wax layer do to water: Repels it

Does the wax reduce surface oxidation: Yes

Does the wax leave a visible sheen: Yes

When does the wax deposit onto the paint: During the wash and rinse phase

Is a separate buffing step required after rinsing: No

Is the wax protection equivalent to a dedicated paste wax: No, it is lighter

What should you use for deeper paint protection: A dedicated wax or sealant applied after washing

What does "Heavy Duty" mean for this product: Stronger cleaning capacity than standard wash products

What types of soiling is it built for: Construction dust, agricultural residue, and heavy road grime

Is the formula water-soluble: Yes

Does it leave residue in panel gaps: No

Does it cause product build-up on trim areas: No

What finish does it deliver: Streak-free and professional

Should you wash a sun-heated panel: No

Why should you avoid washing hot panels: Product dries before rinsing, causing water spots and streaking

When is the best time to wash a vehicle: Early morning or evening

Should you pre-rinse with plain water before applying: Yes

Why pre-rinse before applying: To remove loose debris and protect paint from abrasion

What direction should you apply the product: Roof first, working downward

Why wash from roof downward: Prevents dirty water running over already-cleaned areas

Should you allow dwell time on heavily soiled areas: Yes

What should you use to dry the vehicle after rinsing: A clean microfibre drying towel or chamois

Is prompt drying especially important in hard-water areas: Yes

Why is prompt drying important in hard-water areas: Water spots form quickly

What tool helps with stubborn soiling during hose-on washing: A microfibre wash mitt

Is this product classified as hazardous under Australian GHS 7: No

What regulatory framework classifies this product: Safe Work Australia GHS 7

Is this product classified as Dangerous Goods for transport: No

Can you transport it in a personal vehicle: Yes

Can you store it at home without special regulatory requirements: Yes

What should you do if the product contacts eyes: Flush immediately with clean running water

Should you seek medical advice for persistent eye irritation: Yes

What should you do if the product contacts skin: Remove contaminated clothing and flush with running water

Should you seek medical attention for skin contact: Only if irritation develops and does not resolve

What should you do if the product is ingested: Seek medical advice immediately

What document should be available for medical personnel in an incident: The Safety Data Sheet (SDS)

Is the product classified as hazardous for acute aquatic exposure: No

Is the product classified as hazardous for chronic aquatic exposure: No

Should wash runoff enter stormwater drains: No

Where should you wash vehicles to protect the environment: On grass or gravel

Does over-application improve cleaning performance: No

Should you check local council guidelines about vehicle washing: Yes

How should the product be stored: In a cool, dry, well-ventilated area

Should the product be stored in direct sunlight: No

What does heat and UV exposure do to the formulation: Degrades it over time, reducing both cleaning power and waxing performance

Should the container be sealed when not in use: Yes, tightly sealed

Should the product be stored near food or beverages: No

Should the product be kept out of reach of children: Yes

Is a non-hazardous classification the same as safe for children to consume: No

What is the product's regulatory reference number: SELTOLEN001531

When was the Safety Data Sheet issued: 18 July 2024

Should you rinse the hose attachment after every use: Yes

Why rinse the hose attachment after use: Residual product dries and blocks the applicator mechanism

Should you inspect the product after extended storage: Yes

What signs indicate the product should be replaced: Separation, significant odour change, or colour/consistency changes

Does a faded lemon scent indicate anything: Yes, possible incorrect storage or product degradation

Is this product suitable for first-time users: Yes

Is this product suitable for professional tradespeople: Yes

Does the product suit vehicles exposed to heavy road grime: Yes

Label facts summary

Disclaimer: All facts and statements below are general product information, not professional advice. Consult relevant experts for specific guidance.

Verified label facts

  • Product name: Selleys Polyglaze Heavy Duty Wash & Wax Hose On
  • Manufacturer: Selleys, a division of DuluxGroup Australia
  • Product form: Liquid
  • Colour: Blue
  • Scent: Lemon
  • Container size: 2 litres
  • Application method: Hose-on (attaches directly to hose end)
  • Dilution control: Automatic — hose attachment mixes concentrate at correct ratio
  • Formula type: Water-soluble liquid
  • Requires bucket: No
  • Requires manual mixing: No
  • Requires separate buffing step: No
  • Hazard classification (Safe Work Australia GHS 7): Not classified as hazardous
  • Dangerous Goods classification (road, rail, air, marine): Not classified as Dangerous Goods
  • Aquatic hazard classification (acute and chronic, GHS): Not classified as hazardous
  • Regulatory reference number: SELTOLEN001531
  • Safety Data Sheet issue date: 18 July 2024
  • Storage requirements: Cool, dry, well-ventilated area; away from direct sunlight; container tightly sealed when not in use; store away from food, beverages, and animal feed; keep out of reach of children
  • First aid — eye contact: Flush immediately with clean running water; seek medical advice if irritation persists
  • First aid — skin contact: Remove contaminated clothing; flush with running water; seek medical attention if irritation develops and does not resolve
  • First aid — ingestion or inhalation: Seek medical advice immediately; have SDS available for medical personnel
  • Years of brand operation: Over 80 years (Selleys/DuluxGroup Australia)

General product claims

  • Delivers professional-grade cleaning and protection in a single application
  • Combines washing and waxing into one pass
  • Washing component lifts and removes dirt, road grime, bird droppings, insect residue, and dust via surfactant chemistry
  • Waxing component deposits a protective layer onto paint during the wash and rinse phase
  • Wax layer repels water and reduces surface oxidation
  • Wax leaves a visible sheen on the paint surface
  • Delivers a streak-free, professional finish with no product build-up in panel gaps or trim areas
  • "Heavy Duty" designation indicates stronger cleaning capacity than standard wash products
  • Suited to vehicles exposed to construction dust, agricultural residue, and heavy road grime
  • Wax protection is lighter than that delivered by a dedicated paste or liquid wax applied and buffed separately
  • Faded lemon scent may indicate incorrect storage or product degradation
  • Over-application does not improve cleaning performance
  • Heat and UV exposure degrade the formulation over time, reducing cleaning and waxing performance
  • Residual product left in hose fitting after use can dry and block the applicator mechanism
  • Suitable for first-time users and professional tradespeople
  • Washing on grass or gravel reduces stormwater impact from wash runoff
↑ Back to top