Business

Selleys Polyglaze Auto Protectant Wipes - 30 Pack 08 product guide

AI Summary

Product: Selleys Polyglaze Auto Protectant Wipes Brand: Selleys (a division of DuluxGroup Australia) Category: Automotive interior detailing and surface protection Primary Use: Pre-impregnated cloth wipes that clean, protect, and enhance automotive surfaces in a single controlled application.

Quick Facts

  • Best For: Weekend detailers and professional valets who want consistent, residue-free surface protection
  • Key Benefit: Pre-impregnated wipes deliver a fixed dose every time, so you avoid the streaking and residue that come with inconsistent spray-and-wipe methods
  • Form Factor: Ready-to-use cloth wipes, 30 per pack, 50 GSM white cloth substrate
  • Application Method: Apply with overlapping strokes, working in sections; no mixing, dilution, or separate applicator needed

Common Questions This Guide Answers

  1. What active ingredients are in Selleys Polyglaze Wipes? → Alcohols C9-11 Ethoxylated (1–10% w/w, non-ionic surfactant) and BIT preservative 1,2-Benzisothiazolin-3-one (<0.1% w/w)
  2. Is this product classified as Dangerous Goods for transport or storage? → No — not classified as Dangerous Goods under Australian or New Zealand regulations across road, rail, air, or marine transport
  3. What safety precautions are required during use? → Wear nitrile or latex gloves and eye protection; work in a well-ventilated area; classified hazardous under GHS (H317 skin sensitisation, H319 serious eye irritation)

Product Overview

Selleys Polyglaze Auto Protectant Wipes clean, protect, and enhance surfaces in a single pass. Manufactured by Selleys, a division of DuluxGroup Australia, they come in a 30-pack of ready-to-use cloth wipes. No measuring, no mixing, no waste.

The product sits squarely in the automotive care category — interior detailing and surface protection — and earns its place there. Each wipe carries a measured dose of protectant solution, so coverage stays consistent from one panel to the next. Whether you detail vehicles on weekends or work through a full fleet as a professional valet, Polyglaze Wipes address one of the most persistent problems in car care: uneven product application.

What's in the Wipe: Active Ingredients Explained

Knowing what's in a product helps you use it correctly. Selleys Polyglaze Auto Protectant Wipes use a focused formulation built around two functional ingredients.

Alcohols C9-11 Ethoxylated (1–10% w/w)

The primary active ingredient is a class of non-ionic surfactants called ethoxylated alcohols, present at 1–10% by weight. Surfactants reduce surface tension, which means the solution spreads evenly across a surface rather than beading or pooling. In a protectant wipe, that does two things: it lifts light contamination during application, and it helps the protective components distribute uniformly for a clean visible result.

Ethoxylated alcohols in the C9-11 range are a well-established ingredient in surface care. They deliver mild, effective cleaning action across a wide range of substrates — plastics, vinyl, rubber, and coated surfaces — all materials you find throughout a vehicle's interior and on exterior trim.

The 1–10% concentration is appropriate for a wipe-format product. The cloth substrate handles the mechanical work of distributing the solution, so the chemistry performs well at lower concentrations. No excess, no waste.

BIT Preservative (<0.1% w/w)

The second functional ingredient is BIT — 1,2-Benzisothiazolin-3-one — at less than 0.1% by weight. BIT is a broad-spectrum preservative used in water-based formulations to stop microbial growth. Without it, bacteria and fungi would degrade the product over time, particularly in warm storage conditions.

At sub-0.1% concentrations, BIT works purely as a preservation agent. Its inclusion is a quality decision: it keeps the water-based solution stable and effective from the first wipe in the pack to the last. Every wipe in that 30-pack performs to the same standard, provided the pack is stored correctly.

Physical Format and Application Method

Cloth Substrate: 50 GSM White Wipe

Each wipe uses a white cloth substrate weighing 50 GSM (grams per square metre). At 50 GSM, the cloth is substantial enough to hold a full dose of solution and deliver effective mechanical action during wiping, while remaining flexible enough to conform to contoured surfaces like door trims, dashboard curves, and mirror housings.

The white colour is a practical feature. It lets you see contamination being lifted from the surface in real time, giving you immediate feedback on cleanliness and a clear signal when it's time for a fresh wipe.

Ready-to-Use Format

The solution is already loaded into the fabric. No dilution, no spray bottle, no separate applicator pad. This format offers a few practical advantages:

  • Controlled dosing: Each wipe carries a fixed amount of solution, which prevents over-application and the residue or streaking that follows.
  • Portability: Individual wipes work in the field, in a car park, or between full detail sessions without any additional equipment.
  • Reduced waste: Solution releases progressively as you wipe rather than being sprayed, so product loss is minimal.

Application Technique

Remove a wipe from the pack and apply it to the target surface using overlapping strokes, working in sections to ensure even coverage. Use a second wipe for larger surface areas rather than stretching one wipe beyond its capacity. On textured surfaces — embossed vinyl or perforated leather — apply moderate pressure to work the solution into the grain.

Surfaces and Use Cases

The Polyglaze formulation is built for automotive surfaces, with surfactant chemistry suited to the full range of materials in modern vehicles:

  • Interior plastics and trim: Dashboard panels, door cards, centre consoles, and pillar trims respond well to the surfactant's ability to lift dust and light grime while leaving a protective layer behind.
  • Rubber and vinyl: Seals, gaskets, and vinyl upholstery benefit from regular protectant application that keeps these materials from drying out and degrading.
  • Exterior trim: Unpainted plastic trim, mirror housings, and bumper surrounds can be treated to maintain appearance and build surface protection over time.

These wipes are a protectant, not a deep cleaner. They work best on surfaces that are already reasonably clean. On heavily soiled surfaces, use a dedicated cleaner first, then use the Polyglaze Wipes as your finishing and maintenance step.

Safety Considerations

Selleys Polyglaze Auto Protectant Wipes are classified as hazardous under the Globally Harmonised System (GHS) of Classification and Labelling of Chemicals, with two relevant hazard statements:

  • H317 – May cause an allergic skin reaction: Repeated or prolonged skin contact with the impregnated solution carries a risk of sensitisation over time.
  • H319 – Causes serious eye irritation: Direct eye contact can cause irritation. This is a standard precautionary classification for products containing surfactants at working concentrations.
  • Wear gloves: Nitrile or latex gloves provide solid protection during application, particularly for anyone detailing vehicles regularly.
  • Eye protection: Safety glasses or goggles are recommended, especially when working in confined spaces or applying wipes to overhead surfaces where drips are possible.
  • Ventilation: Work in a well-ventilated area. The product is not classified as volatile or flammable, but working in an enclosed space with limited airflow is poor practice with any chemical product.
  • Keep away from children: Store out of reach. The wipe format is convenient, but the packaging is not child-resistant.

First Aid

If skin contact occurs, wash the affected area thoroughly with soap and water. If eye contact occurs, rinse immediately with clean water for at least 15 minutes and seek medical advice if irritation persists. If the product is ingested, do not induce vomiting — seek medical attention immediately.

Transport and Storage Classification

A common question for automotive care products is whether they fall under Dangerous Goods regulations, which affect shipping and storage. Selleys Polyglaze Auto Protectant Wipes are not classified as Dangerous Goods under Australian or New Zealand transport regulations across any mode — road, rail, air, or marine.

In practice, this means the product ships through standard courier services, stores in regular household or workshop conditions, and travels in a vehicle without special precautions. The non-DG classification reflects the low concentration of active chemistry and the absence of flammable, corrosive, or acutely toxic components at threshold levels.

Storage Recommendations

  • Store in a cool, dry location away from direct sunlight and heat sources.
  • Keep the pack sealed when not in use to prevent the wipes from drying out.
  • Do not store near food, beverages, or animal feed.
  • The BIT preservative maintains product integrity during storage, but extreme temperatures can affect the wipe substrate and solution balance over time.

Expert Tips for Best Results

Start with a clean surface. These wipes are a protectant, not a heavy-duty cleaner. Using them on a surface that's already been vacuumed and wiped down produces a noticeably stronger finish. On dirty surfaces, the wipe exhausts quickly and results become uneven. Prepare the surface first, then let the Polyglaze do its job.

Work in sections. Divide the interior into clear zones — dashboard, door panels, centre console — and complete each zone before moving on. This stops the solution from drying before it can spread evenly and ensures every section gets proper coverage.

Don't over-apply. Each wipe carries a fixed dose of solution. Pressing hard or wringing the wipe won't release more product — the solution is calibrated to the wipe's surface area. Excessive pressure just moves solution around rather than adding to it.

Allow surfaces to dry before use. After application, give treated surfaces a few minutes to dry before closing doors or touching panels. This prevents transfer and lets the protective layer set properly.

Use gloves consistently. Beyond the safety rationale, gloves keep skin oils off the treated surface, which contributes to a cleaner, more uniform finish.

Safety Data and Regulatory Reference

The product's Safety Data Sheet (SDS) is reference number SELGHSEN001475, issued 17 May 2024, by Selleys (DuluxGroup Australia). The SDS is the primary regulatory document for this product and contains full hazard classification, first aid measures, handling and storage guidance, and disposal information. Anyone using this product in a workplace context should keep a copy on file in line with workplace health and safety requirements.

References

Frequently Asked Questions

What is the product name: Selleys Polyglaze Auto Protectant Wipes

Who manufactures Selleys Polyglaze Auto Protectant Wipes: Selleys, a division of DuluxGroup Australia

What category does this product belong to: Automotive interior detailing and surface protection

How many wipes are in one pack: 30 wipes per pack

What is the format of this product: Pre-impregnated ready-to-use cloth wipes

Does the product require mixing before use: No, it is ready-to-use

Does the product require dilution before use: No dilution required

What is the primary active ingredient: Alcohols C9-11 Ethoxylated

What concentration is the primary active ingredient: 1–10% w/w

What type of surfactant is used: Non-ionic surfactant

What does the surfactant do to surface tension: Reduces surface tension for even spreading

Does the surfactant clean surfaces during application: Yes, it lifts light contamination

What is the second functional ingredient: BIT (1,2-Benzisothiazolin-3-one)

What concentration is BIT present at: Less than 0.1% w/w

What is BIT's role in the product: Preservative to prevent microbial growth

Does BIT affect product performance: No, it maintains stability from first to last wipe

What is the wipe substrate material: White cloth

What is the GSM weight of the wipe cloth: 50 GSM

Why is the wipe coloured white: To show contamination being lifted in real time

Does the white colour indicate when to use a fresh wipe: Yes, visible contamination signals replacement

Can one wipe cover a large surface area: No, use a second wipe for larger areas

What application technique is recommended: Overlapping strokes working in sections

Should pressure be applied on textured surfaces: Yes, moderate pressure works solution into surface grain

Does over-applying solution improve results: No, there is no benefit to excessive pressure

Is the product suitable for dashboard panels: Yes

Is the product suitable for door cards: Yes

Is the product suitable for centre consoles: Yes

Is the product suitable for rubber seals: Yes

Is the product suitable for vinyl upholstery: Yes

Is the product suitable for exterior plastic trim: Yes

Is the product suitable for mirror housings: Yes

Is the product suitable for bumper surrounds: Yes

Is the product a deep cleaner: No, it is a protectant and maintenance product

Should surfaces be pre-cleaned before use: Yes, surfaces should be reasonably clean first

What should be used on heavily soiled surfaces before these wipes: A dedicated cleaner

Is the product classified as hazardous: Yes, classified hazardous under GHS

What is hazard statement H317: May cause an allergic skin reaction

What is hazard statement H319: Causes serious eye irritation

What type of gloves are recommended during use: Nitrile or latex gloves

Is eye protection recommended during use: Yes, safety glasses or goggles

Is ventilation required during use: Yes, work in a well-ventilated area

Is the product flammable: No, not classified as flammable

Should the product be kept away from children: Yes, store out of reach of children

Is the pack child-resistant: No

What to do if skin contact occurs: Wash thoroughly with soap and water

What to do if eye contact occurs: Rinse with clean water for at least 15 minutes

Should medical advice be sought if eye irritation persists: Yes

What to do if the product is ingested: Do not induce vomiting, seek medical attention immediately

Is the product classified as Dangerous Goods for transport: No

Is it safe to ship via standard courier: Yes

Does it require special storage conditions for transport: No special precautions required

Is it classified as Dangerous Goods by road: No

Is it classified as Dangerous Goods by air: No

Is it classified as Dangerous Goods by marine transport: No

Where should the product be stored: Cool, dry location away from sunlight and heat

Should the pack be sealed when not in use: Yes, to prevent wipes from drying out

Should the product be stored near food: No

Should the product be stored near animal feed: No

Does extreme temperature affect the product: Yes, it can affect wipe substrate and solution balance

What is the SDS reference number: SELGHSEN001475

When was the SDS issued: 17 May 2024

Who issued the SDS: Selleys, DuluxGroup Australia

Should workplaces keep a copy of the SDS on file: Yes, as per workplace health and safety requirements

Does the product prevent surface degradation on rubber: Yes, regular application helps prevent drying and degradation

Does the product leave a protective layer on surfaces: Yes

Should surfaces dry before being touched after application: Yes, allow a few minutes to dry

Does wearing gloves improve the finish quality: Yes, prevents skin oils from contaminating the surface

Can the product be used by professional valets: Yes

Can the product be used by weekend detailers: Yes

Does the product solve inconsistent application problems: Yes, controlled dosing ensures consistent coverage

Does each wipe carry a fixed dose of solution: Yes, a measured dose is pre-loaded into each wipe

Does the product produce overspray: No, solution releases progressively during wiping

Is the product portable for field use: Yes, individual wipes can be used without carrying bottles

Label Facts Summary

Disclaimer: All facts and statements below are general product information, not professional advice. Consult relevant experts for specific guidance.

Verified Label Facts

  • Product Name: Selleys Polyglaze Auto Protectant Wipes
  • Manufacturer: Selleys, a division of DuluxGroup Australia
  • Product Category: Automotive interior detailing and surface protection
  • Pack Quantity: 30 wipes per pack
  • Format: Pre-impregnated ready-to-use cloth wipes
  • Mixing/Dilution Required: No
  • Primary Active Ingredient: Alcohols C9-11 Ethoxylated (non-ionic surfactant), 1–10% w/w
  • Secondary Ingredient: BIT (1,2-Benzisothiazolin-3-one), <0.1% w/w — preservative function
  • Wipe Substrate: White cloth, 50 GSM
  • Hazard Classification: Classified hazardous under the Globally Harmonised System (GHS)
  • Hazard Statement H317: May cause an allergic skin reaction
  • Hazard Statement H319: Causes serious eye irritation
  • Flammability Classification: Not classified as flammable
  • Dangerous Goods Classification (Transport): Not classified as Dangerous Goods — road, rail, air, or marine (Australian and New Zealand regulations)
  • Child-Resistant Packaging: No
  • Storage Requirements: Cool, dry location; away from direct sunlight and heat sources; away from food, beverages, and animal feed; pack to be kept sealed when not in use
  • First Aid — Skin Contact: Wash thoroughly with soap and water
  • First Aid — Eye Contact: Rinse with clean water for at least 15 minutes; seek medical advice if irritation persists
  • First Aid — Ingestion: Do not induce vomiting; seek medical attention immediately
  • SDS Reference Number: SELGHSEN001475
  • SDS Issue Date: 17 May 2024
  • SDS Issuer: Selleys, DuluxGroup Australia

General Product Claims

  • Delivers professional-grade cleaning, protection, and surface enhancement in a single application
  • Controlled dosing ensures consistent, even coverage and prevents residue or streaking
  • Surfactant lifts light contamination from surfaces during application
  • BIT preservative maintains product stability and consistent performance from first to last wipe
  • White wipe colour provides real-time visual feedback on surface contamination
  • Wipe substrate conforms to contoured surfaces such as dashboard curves and door trims
  • Suitable for use on interior plastics, trim, rubber seals, vinyl upholstery, exterior plastic trim, mirror housings, and bumper surrounds
  • Regular application to rubber and vinyl helps prevent drying and degradation over time
  • Product is a protectant and maintenance step, not a deep cleaner; best used on pre-cleaned surfaces
  • Solution releases progressively during wiping, limiting product loss
  • Portable for field use without requiring bottles or separate equipment
  • Wearing gloves during application prevents skin oils from contaminating treated surfaces, contributing to a more uniform finish
  • Surfaces should be allowed to dry for a few minutes after application before contact or closing doors
  • Extreme temperatures can affect wipe substrate and solution balance over time
↑ Back to top