Product Facts

Product Name
Selleys White for Life Ready To Use Grout - 410g Cartridge
Availability
In Stock
Condition
New
Category
Home & Garden > Tiling & Flooring Supplies > Grout
Seller
Selleys
Selleys White for Life Ready To Use Grout - 410g Cartridge

Selleys White for Life Ready To Use Grout - 410g Cartridge

Water-based, easy to use, brilliant white grout ideal for wall and floor tiles with joints up to 5mm wide. Resists yellowing, staining and blackening. Provides superior water resistance, mould and soap scum resistance. Sand free - resists scratching. Suitable for ceramic, porcelain and stone tiles.

Buy Now
Safety Data Sheet - AU
View Product Guide

Product Data (OpenAI Spec)

View Full JSON Spec ↗

Specifications

Use Interior
Size 410g Cartridge, 1.4kg Tub
Colours White
Storage Allow grout to set for 3 days before sealing Selleys White For Life Sealer for maximum stain resistance. Reapply sealer annually or whenever grout has been scrubbed hard. Clean grout and tiles regularly with Selleys White For Life Tile & Grout Cleaner to avoid build up of soil or soap scrum. Do not use harsh acidic cleaners. Areas subject to high foot traffic will require frequent cleaning. Clean up spills immediately – grout will resist penetration by common stains for up to 10 minutes.
Technology Water Based
Limitations Not for areas frequently immersed in water eg. Shower floors. Allow to dry for 3 days before exposing grout to water on shower walls.
Directions for Use Preparation: For new tiling jobs, use Selleys White For Life Tiling Adhesives. Ensure that the tile adhesive has set (usually 24-48hrs). Remove spacers, rake out excessive, dust, debris etc from the joints. If re-grouting remove old grout and clean thoroughly with Selleys Rapid Mould Killer and allow to dry. Do not grout at temperatures below 10°C, or in damp conditions. Before grouting, check ease of removal from matt or textured tile surfaces. Seal porous tiles before grouting or removal of grout from tiles will be difficult. Application: 1. Cut seal, screw on nozzle, cut to size. Apply with a caulking gun, forcing grout into joints (for cartridge only). Grout small areas at a time. 2. Work the grout into the joints and smooth off using a rubber squeegee or grout float, moving diagonally across the joints with several passes to compact the grout lines and minimise the amount left on the face of the tiles – avoid moving along the joint as this removes grout from the joint. Tip: hold float/squeegee at 45° angle; clean regularly. Clean up with water, before grout sets. 3. Allow grout to firm up in joints for approx 20 min (longer in colder conditions). 4. Using a damp (not wet) sponge, clean tile surfaces, by wiping lightly, in a circular motion. Finish with a single wipe diagonally across the tile with a clean damp (not wet) sponge. Avoid repeated wiping as this may remove grout which is not yet fully set, from the joints. 5. Buff and polish the tile surface, after 24hours, with a soft clean cloth. Use Selleys White For Life Grout Cleaner for any stubborn haze marks. Coverage: 1 cartridge is sufficient for 2sqm of tiling (300mm x 30mm tiles; joint depth 5mm and width 3mm). 1.4kg is sufficient for 6sqm of tiling (300mm x 30mm tiles; joint depth 5mm and width 3mm). Clean Up: Clean up tools with water before product hardens. Uncured product may be removed with water. Cured product can only be removed by sanding and scraping.

Product Intelligence

Selleys White For Life Ready To Use Tile Grout - 410g Technical Details

Product Overview

Selleys White For Life Tile Grout (Ready To Use) is a ready-mixed tile grout product available in a convenient 410g cartridge size. The product is manufactured by Selleys, a division of DuluxGroup (Australia) Pty Ltd, and is designed for professional and domestic tile grouting applications.

Product Identification

The 410g cartridge variant carries the following identification details:

  • Product Code: 100732
  • Barcode: 9300697125996
  • Reference Number: SELGHSEN000529
  • Recommended Use: Ready mixed tile grout

Physical and Chemical Properties

The product exhibits the following technical specifications:

Property Value
Form Paste
Colour White
Odour Characteristic
Solubility Dispersible in water
Specific Gravity 1.38
Vapour Pressure >1 NAv
Flash Point N App
Boiling Point Range >100°C
pH NAv
Viscosity >21 mm²/s @ 40°C
Total VOC NAv (Not Available)

Note: Typical values only - consult specification sheet for complete information

Hazard Classification and Safety Information

Hazard Classification

The product is classified as hazardous according to Safe Work Australia GHS 7 criteria with the following classification:

  • Signal Word: Warning
  • Hazard Classification: Sensitisation - Skin - Category 1
  • Hazard Statement: H317 May cause an allergic skin reaction

Acute Health Effects

When mishandled or overexposed, the product may cause the following acute effects:

  • Inhalation: Material may be an irritant to mucous membranes and respiratory tract
  • Skin Contact: Contact with skin may result in irritation; identified as a skin sensitiser with potential for allergic contact dermatitis upon repeated or prolonged contact
  • Eye Contact: May be an eye irritant; exposure to dust may cause discomfort due to particulate nature
  • Ingestion: Swallowing can result in nausea, vomiting, and irritation of the gastrointestinal tract

Acute Toxicity Classification

The product has been classified as not hazardous for acute toxicity across all exposure routes:

  • Inhalation: Not hazardous for acute inhalation exposure (LC50 > 5.0 mg/L for dust)
  • Dermal (Skin): Not hazardous for acute dermal exposure (LD50 > 2,000 mg/Kg bw)
  • Ingestion: Not hazardous for acute ingestion exposure (LD50 > 2,000 mg/Kg bw)

Chronic Toxicity

The product has been classified as not hazardous for chronic toxicity effects:

  • Mutagenicity: Not a mutagen
  • Carcinogenicity: Not a carcinogen
  • Reproductive Toxicity: Not a reproductive toxicant (including via lactation)

Environmental Classification

  • Acute Aquatic Hazard: Not hazardous for acute aquatic exposure (Acute toxicity estimate: >100 mg/L)
  • Long-Term Aquatic Hazard: Not hazardous for chronic aquatic exposure
  • Contamination Risk: Avoid contaminating waterways

Handling and Storage

Personal Protection Equipment

When handling the product, appropriate protective equipment must be worn:

  • Safety shoes, overalls, gloves, and safety glasses are required
  • Nitrile rubber gloves are suitable for intermittent contact
  • Eye/face protection is required due to skin sensitisation classification

Storage Requirements

The product must be stored following these guidelines:

  • Store in a cool, dry, well-ventilated place
  • Keep out of direct sunlight
  • Store away from foodstuffs
  • Store away from incompatible materials (oxidising agents)
  • Store away from sources of heat and/or ignition
  • Keep containers closed when not in use

Exposure Controls

Engineering Measures: Natural ventilation is adequate under normal use conditions

Hygiene Measures:

  • Keep away from food, drink, and animal feeding stuffs
  • Do not eat, drink, or smoke when using the product
  • Wash hands prior to eating, drinking, or smoking
  • Avoid contact with clothing
  • Ensure eyewash stations and safety showers are positioned close to workstation locations

Fire Fighting and Emergency Response

Fire Safety

  • Hazchem Code: Not applicable
  • Non-Combustible Material: The material is non-combustible; however, following evaporation of the aqueous component, residual material can burn if ignited
  • Suitable Extinguishing Media: Water fog (or fine water spray if unavailable), alcohol resistant foam, standard foam, or dry agent (carbon dioxide, dry chemical powder)

Accidental Release

Small Spills:

  • Wear protective equipment to prevent skin and eye contamination
  • Avoid inhalation of vapours or dust
  • Wipe up with absorbent materials (clean rag or paper towels)
  • Collect and seal in properly labelled containers or drums for disposal

Large Spills:

  • Clear area of all unprotected personnel
  • Wear protective equipment to prevent skin and eye contamination and inhalation of dust
  • Work upwind or increase ventilation
  • Cover with damp absorbent material (inert material, sand, or soil)
  • If contamination of crops, sewers, or waterways has occurred, advise local emergency services

Transport Classification

The product is not classified as dangerous goods for transport by:

  • Australian Code for the Transport of Dangerous Goods by Road & Rail
  • New Zealand NZS5433: Transport of Dangerous Goods on Land
  • International Maritime Dangerous Goods Code (IMDG Code)
  • International Air Transport Association (IATA) Dangerous Goods Regulations

Precautionary Statements

Prevention (P) Statements

  • P102: Keep out of reach of children
  • P103: Read carefully and follow all instructions
  • P261: Avoid breathing dust, fume, gas, mist, vapours, or spray
  • P272: Contaminated work clothing should not be allowed out of the workplace
  • P280: Wear protective gloves/protective clothing including eye/face protection

Response (P) Statements

  • P101: If medical advice is needed, have product container or label at hand
  • P302+P352: IF ON SKIN: Wash with plenty of water and soap
  • P333+P313: If skin irritation or rash occurs: Get medical advice/attention
  • P362+P364: Take off contaminated clothing and wash it before reuse

Disposal (P) Statement

  • P501: Dispose of contents/container in accordance with local, regional, national, and international regulations

First Aid Measures

In case of exposure, the following first aid procedures apply:

Inhalation: Remove victim from exposure; avoid becoming a casualty. Remove contaminated clothing and loosen remaining clothing. Allow patient to assume comfortable position and keep warm. Seek medical advice if effects persist.

Skin Contact: Effects may be delayed. Remove contaminated clothing and flush skin and hair with running water. Seek medical assistance if swelling, redness, blistering, or irritation occurs.

Eye Contact: Wash out immediately with water. Seek medical advice as a sensible precaution in all cases of eye contamination.

Ingestion: Rinse mouth with water. Do NOT induce vomiting. Give a glass of water to drink. Seek medical advice.

Emergency Contact: If poisoning occurs, contact a doctor or Poisons Information Centre (Australia: 131 126; New Zealand: 0800 764 766)

Regulatory Status

The product is subject to the following regulatory requirements:

  • HSNO Group Standard: HSR002544 - Construction Products (Subsidiary Hazard) Group Standard 2020
  • AIICS Status: All components are listed on or exempt from the Australian Inventory of Industrial Chemicals
  • NZ EPA Status: All components are listed on or exempt from the New Zealand Inventory of Chemical (NZIoC)
  • Not Subject To: Montreal Protocol, Stockholm Convention, Rotterdam Convention, Basel Convention, or MARPOL

Safety Documentation

The Safety Data Sheet for this product has been prepared by Chemical Data Services Pty Ltd on behalf of Selleys and is available through the Selleys website at www.selleys.com.

References

  • [1] SELLEYS_WHITE_FOR_LIFE_TILE_GROUT__READY_TO_USE_-AUS_GHS.pdf
↑ Back to top