Product Facts
- Product Name
- Pro Trade Joint Sealant FC - Fast Curing Polyurethane Sealant
- Availability
- In Stock
- Condition
- New
- Category
- Home & Garden > Sealants & Adhesives
- Seller
- Selleys
Pro Trade Joint Sealant FC - Fast Curing Polyurethane Sealant
Selleys Pro Trade Joint Sealant FC is a fast curing polyurethane adhesive and sealant with high flexibility and excellent adhesion. Features ±25% joint movement, excellent weatherproofing, and is waterproof once cured. Suitable for outdoor and indoor joints, vertical & horizontal, including trafficable joints. Available in White, Grey, and Black colors.
Product Data (OpenAI Spec)
View Full JSON Spec ↗Specifications
| Sag | 0mm (EN ISO 7390) |
|---|---|
| Colours | White Grey Black |
| Density | 1.08 ±0.03 g/mL |
| Cure Rate | ≥3mm / 24h |
| Technology | Polyurethane adhesive & sealant |
| Limitations | Not for continuous submersion or below‑water‑line use. Will not adhere properly to PE or PP; test other plastics before use. Do not apply on frozen or wet surfaces. |
| Application Temp | 5‑40°C |
| Shore A Hardness | ~40 ±5 |
| Tack‑Free Time | ~40 ±10 minutes (23°C / 50% RH) |
| Tensile Strength | ~2.0‑2.5 N/mm² |
| Directions for Use | 1. Clean surfaces thoroughly (remove dirt, oil, release agents, loose material). 2. Cut nozzle; load cartridge or sausage into gun; pierce seal if needed. 3. Insert backing rod if required; mask edges if neat finish is desired. 4. Extrude sealant ensuring full side contact; avoid trapping air. 5. Tool bead for smooth finish. 6. Paint with water‑based paints once cured; use primer if applying oil‑based paint. 7. Clean uncured sealant with mineral turps; remove cured product mechanically. |
| Elongation at Break | ≥ 400% |
| Service Temperature | –40°C to +70°C |