Selleys No More Cracks Powder Interior - 1kg Technical Details

Product Overview

Selleys No More Cracks Powder Interior is a professional-grade filler product designed for patching holes and cracks in most interior surfaces. The 1kg variant is one of several available sizes in this product line, making it suitable for both small and medium-scale repair projects.

Product Identification

The 1kg variant of Selleys No More Cracks Powder Interior is identified by:

• Product Code: 930069712224701
• Barcode: 9300697122247
• Supplier: Selleys, a division of DuluxGroup (Australia) Pty Ltd
• Reference Number: SELGHSEN000432

Safety Classification

Based on available hazard assessment information, this material is not classified as hazardous according to the criteria of Safe Work Australia GHS 7. Additionally, the product is not classified as Dangerous Goods for transportation purposes under:

• Australian Code for the Transport of Dangerous Goods by Road & Rail
• New Zealand NZS5433: Transport of Dangerous Goods on Land
• International Maritime Dangerous Goods Code (IMDG Code)
• International Air Transport Association (IATA) Dangerous Goods Regulations

Poison Schedule: Not Applicable

Physical and Chemical Properties

The product demonstrates the following physical characteristics:

• Viscosity: Greater than 6,000 Poise (indicating a thick, paste-like consistency)
• Thermal Stability: The material remains thermally stable when stored and used as directed
• Form: Powder formulation suitable for interior applications

Chemical Composition

The product contains ingredients determined to be non-hazardous or below reporting limits, comprising 100% (w/w) of the total formulation.

Handling and Storage Guidelines

Storage Requirements

Store the product in conditions that maintain its integrity and safety:

• Store in a cool, dry, well-ventilated place
• Keep out of direct sunlight
• Store away from foodstuffs
• Keep away from incompatible materials (specifically oxidizing agents)
• Maintain distance from sources of heat and/or ignition
• Keep container standing upright
• Keep containers closed when not in use and check regularly for spills

Handling Precautions

When using the product:

• Avoid eye contact and repeated or prolonged skin contact
• Avoid inhalation of dust
• Use in well-ventilated areas to minimize dust exposure

Personal Protective Equipment (PPE)

For safe handling of Selleys No More Cracks Powder Interior, the following protective equipment is recommended:

• Safety shoes
• Overalls
• Gloves - Nitrile rubber gloves are suitable for intermittent contact (though variations in glove construction and local conditions may require user assessment)
• Safety glasses
• Dust mask

Hygiene Measures:

• Always wash hands before smoking, eating, drinking, or using the toilet
• Wash contaminated clothing and protective equipment before storing or re-using
• Ensure eyewash stations and safety showers are accessible near the workstation

First Aid Information

In case of accidental exposure:

Inhalation: Remove victim from exposure, avoid becoming a casualty. Remove contaminated clothing and loosen remaining clothing. Allow the patient to assume the most comfortable position and keep warm. Keep at rest until fully recovered. Seek medical advice if effects persist.

Skin Contact: Remove contaminated clothing and flush skin and hair with running water. If swelling, redness, blistering, or irritation occurs, seek medical assistance.

Eye Contact: Wash out immediately with water. In all cases of eye contamination, seek medical advice as a precautionary measure.

Ingestion: Rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water to drink. Never give anything by mouth to an unconscious patient. If vomiting occurs, give further water and seek medical advice.

Fire Fighting Measures

• Suitable Extinguishing Media: Water fog (or fine water spray if unavailable), alcohol-resistant foam, standard foam, dry agent (carbon dioxide, dry chemical powder)
• Specific Hazards: Non-combustible material
• Hazchem Code: Not applicable

Accidental Release Procedures

Small Spills:

• Wear protective equipment to prevent skin and eye contamination
• Avoid inhalation of dust
• Wipe up with absorbent materials (clean rag or paper towels)
• Collect and seal in properly labeled containers or drums for disposal

Large Spills:

• Clear area of unprotected personnel
• Wear protective equipment to prevent contamination
• Work upwind or increase ventilation
• Cover with damp absorbent material (inert material, sand, or soil)
• Sweep or vacuum up while avoiding dust generation
• Collect and seal in properly labeled containers for disposal
• Advise local emergency services if contamination of crops, sewers, or waterways occurs

Stability and Reactivity

• Chemical Stability: Thermally stable when stored and used as directed
• Conditions to Avoid: Elevated temperatures and sources of ignition
• Incompatible Materials: Oxidizing agents
• Hazardous Decomposition Products: Oxides of carbon and nitrogen, smoke, and other toxic fumes
• Hazardous Reactions: No known hazardous reactions

Exposure Controls

Occupational Exposure Limits: No occupational exposure limit value has been assigned for this specific material by Safe Work Australia.

Engineering Measures: Natural ventilation should be adequate under normal use conditions.

Regulatory Compliance

The product complies with the following regulatory frameworks:

• AIIC Status: All components are listed on or exempt from the Australian Inventory of Industrial Chemicals
• NZ EPA Status: All components are listed on or exempt from the New Zealand Inventory of Chemicals (NZIoC)
• Not Subject To: Montreal Protocol, Stockholm Convention, Rotterdam Convention, Basel Convention, or MARPOL

Recommended Use

Primary Application: Filler for patching holes and cracks in most interior surfaces

References

• [1] SELLEYS_NO_MORE_CRACKS_POWDER_INTERIOR-AUS_GHS.pdf