Product Facts
- Product Name
- Selleys No More Cracks Exterior Brick & Render - 500g
- Availability
- In Stock
- Condition
- New
- Category
- Home & Garden > Building Materials & Supplies > Putty & Fillers
- Seller
- Selleys
Selleys No More Cracks Exterior Brick & Render - 500g
Ready to use filler that dries with a durable render finish. Easily repairs deep wide cracks, chips, holes and small surface imperfections on exterior masonry surfaces including brick and render. Water-based technology, dries to cement grey colour, sandable and paintable with water based or oil based paints. Minimal shrinkage.
Product Data (OpenAI Spec)
View Full JSON Spec ↗Specifications
| Colour | Grey |
|---|---|
| Packaging | 500 g tub |
| Limitations | Do not use below 5°C |
| Directions for Use | 1. Ensure surface is clean and dry. 2. Press filler firmly into hole and tool to feathered edge. 3. Allow 2–3 hours to dry for thin applications. 4. For deep holes apply in 10 mm layers allowing each to dry. 5. Protect from rain until dry. 6. Clean tools with water before filler dries. |
| Sand/Painting Time | 2–3 hours (2–3 mm application) |
Product Intelligence
Selleys No More Cracks Exterior Brick & Render - 500g
Product Overview
No More Cracks Exterior Brick & Render is a specialized filler product manufactured and supplied by Selleys, a division of DuluxGroup (Australia) Pty Ltd. This paste-form product is specifically designed for masonry applications and is available in 500g containers.
Product Identification
- Product Name: NO MORE CRACKS EXTERIOR BRICK & RENDER
- Product Code: 100563
- Barcode: 9300697125699
- Recommended Use: Filler for masonry
- Physical Form: Paste
Physical and Chemical Properties
The product exhibits the following technical specifications:
| Property | Value |
|---|---|
| Form | Paste |
| Colour | Brown |
| Odour | Mild, characteristic |
| Solubility | Soluble in water |
| Specific Gravity | 1.5 - 1.6 |
| Relative Vapour Density (air=1) | >1 |
| Vapour Pressure (20°C) | Not available |
| Flash Point (°C) | Not applicable |
| Flammability Limits (%) | Not applicable |
| Autoignition Temperature (°C) | Not available |
| Boiling Point/Range (°C) | Not available |
| pH | Not available |
| Viscosity | >21 mm²/s @ 40°C |
| Total VOC (g/Litre) | Not available |
Hazard Classification
This material is classified as hazardous according to Safe Work Australia GHS 7 criteria with the following designation:
- Signal Word: Warning
- Hazard Classification: Sensitisation - Skin - Category 1
- Hazard Statement: H317 - May cause an allergic skin reaction
Chemical Composition
The product contains the following key components:
- Poly[oxy(methy-1,2-ethanediy)], α-(methylphenyl)-ω-hydroxy- (<1% w/w)
- 2-Octyl-2H-isothiazol-3-one (OiT) (<0.07% w/w)
- 1,2-Benzisothiazol-3(2H)-one (BIT) (<0.05% w/w)
- 2-Methyl-1,2-benzisothiazol-3(2H)-one (MBIT) (<0.05% w/w)
- Balance: Non-hazardous ingredients or below reporting limits
Safety Features
Acute Toxicity Assessment
- Inhalation: Not hazardous for acute inhalation exposure (LC50 > 5.0 mg/L for dust)
- Skin Contact: Not hazardous for acute dermal exposure (LD50 > 2,000 mg/Kg body weight)
- Ingestion: Not hazardous for acute ingestion exposure (LD50 > 2,000 mg/Kg body weight)
- Aspiration Hazard: Not classified as an aspiration hazard
Chronic Toxicity
- Mutagenicity: Not a mutagen
- Carcinogenicity: Not a carcinogen
- Reproductive Toxicity: Not a reproductive toxicant
- Target Organ Toxicity: Not a specific hazard to target organs by repeat exposure
Fire Fighting Properties
- Hazchem Code: Not applicable
- Specific Hazards: Non-combustible material
- Fire Fighting Advice: Although non-combustible, following evaporation of the aqueous component, residual material can burn if ignited
- Suitable Extinguishing Media: Water fog or fine water spray, alcohol resistant foam, standard foam, or dry agent (carbon dioxide, dry chemical powder)
Storage and Handling
Storage Conditions:
- Store in a cool, dry, well-ventilated place away from direct sunlight
- Store away from foodstuffs and incompatible materials
- Keep away from sources of heat and ignition
- Keep containers closed when not in use
Handling Precautions:
- Avoid eye contact and skin contact
- Avoid inhalation of dust
- Contaminated work clothing should not be allowed out of the workplace
Personal Protective Equipment
- Safety shoes
- Overalls
- Protective gloves (nitrile rubber recommended for intermittent contact)
- Eye/face protection or safety glasses
- Chemical goggles may be appropriate for some applications
Transport Classification
This product is not classified as Dangerous Goods according to:
- Australian Code for the Transport of Dangerous Goods by Road & Rail
- New Zealand NZS5433: Transport of Dangerous Goods on Land
- International Maritime Dangerous Goods Code (IMDG Code)
- International Air Transport Association (IATA) Dangerous Goods Regulations
Regulatory Status
- Poison Schedule: Not Applicable
- AICIS Status: All components are listed on or exempt from the Australian Inventory of Industrial Chemicals (AIIC)
- NZ EPA Status: All components are listed on or exempt from the New Zealand Inventory of Chemical (NZIoC)
- HSNO Group Standard: HSR002670 - Surface Coatings and Colourants (Subsidiary Hazard) Group Standard 2020
Supplier Information
Selleys (DuluxGroup Australia Pty Ltd)
- ABN: 67 000 049 427
- Street Address: 1956 Dandenong Road, Clayton VIC 3168, Australia
- Telephone: 1300 555 205
- Emergency Telephone: Australia – 1800 220 770; New Zealand – 0800 764 766
References
- [1] NO_MORE_CRACKS_EXTERIOR_BRICK___RENDER-AUS_GHS.pdf