Product Facts
- Product Name
- Selleys Fireproof Cement - 850g
- Availability
- In Stock
- Condition
- New
- Category
- Home & Garden > Building Materials & Hardware > Putty & Fillers
- Seller
- Selleys
Selleys Fireproof Cement - 850g
Fire-resistant cement for interior filling of stoves and fireplaces. Protect your home and loved ones from fire hazards with Selleys Fireproof Cement. Perfect for high-risk areas like fireplaces and chimneys. This thick white paste resists intense heat and sets hard. Suitable for repairing bricks in fireplaces and chimneys, sealing flues in pot-belly stoves, and filling cracks in ironworks and bricks.
Product Data (OpenAI Spec)
View Full JSON Spec ↗Specifications
| Use | Interior |
|---|---|
| Size | 850g Tub |
| Colour | White |
| Technology | Water Based |
| Limitations | Fireproof Cement is not an adhesive - it is a filling compound. Not recommended for external use e.g. BBQ's, incinerators etc. Fireproof Cement is not suitable for use in kilns. Fireproof Cement is not recommended for moving joints such as expansion joints as it sets rigidly. Hardened material cannot be resoftened with water. |
| Directions for Use | 1. Remove dust, grease and loose debris before applying. 2. Dampen cavities for better adhesion. 3. Apply firmly into holes and cracks with a damp knife or spatula. 4. Allow to dry at least 48 hours before exposure to heat. 5. If stiff, loosen with a little water. 6. Trim excess before cure. 7. Clean uncured product with water. |
Product Intelligence
Selleys Fireproof Cement - 850g Technical Details, Specifications, Features, and Entities
Product Overview
Selleys Fireproof Cement is a sodium silicate-based cement product specifically designed for interior use in sealing stoves and fireplaces. It is supplied in convenient 850g containers and manufactured by Selleys, a division of DuluxGroup (Australia) Pty Ltd.
Product Identification
| Detail | Information |
|---|---|
| Product Name | Selleys Fireproof Cement |
| Product Code | 9300697118813 |
| Bar Code | 9300697118813 |
| Container Size | 850g |
| Recommended Use | Sodium silicate based cement for interior use sealing stoves and fireplaces |
Chemical Composition
The primary chemical constituent of Selleys Fireproof Cement is:
- Silicic Acid, Sodium Salt (CAS No. 1344-09-8): 10-30% (w/w)
- Other ingredients determined to be non-hazardous or below reporting limits comprise the balance
Hazard Classification
This material is classified as hazardous according to the criteria of Safe Work Australia GHS 7, with the following hazard classifications:
- Skin Irritation - Category 2
- Eye Damage - Category 1
- Specific Target Organ Toxicity (Single Exposure) - Category 3 (Respiratory Tract Irritation)
Hazard Statements
- H315: Causes skin irritation
- H318: Causes serious eye damage
- H335: May cause respiratory irritation
Safety Precautions
Prevention Precautionary Statements
- P102: Keep out of reach of children
- P103: Read carefully and follow all instructions
- P261: Avoid breathing dust, fume, gas, mist, vapours or spray
- P264: Wash hands, face and all exposed skin thoroughly after handling
- P271: Use only outdoors or in a well-ventilated area
- P280: Wear protective gloves/protective clothing including eye/face protection
Response Precautionary Statements
- P304+P340: If inhaled: Remove person to fresh air and keep comfortable for breathing
- P305+P351+P338: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing
- P310: Immediately call a POISON CENTER/doctor
- P332+P313: If skin irritation occurs: Get medical advice/attention
Storage Precautionary Statements
- P403+P233: Store in a well-ventilated place. Keep container tightly closed
- P405: Store locked up
Disposal Precautionary Statement
- P501: Dispose of contents/container in accordance with local, regional, national and international regulations
Poison Schedule and Dangerous Goods Classification
- Poison Schedule: Not Applicable
- Dangerous Goods Classification: Not classified as Dangerous Goods by the criteria of the "Australian Code for the Transport of Dangerous Goods by Road & Rail" and the "New Zealand NZS5433: Transport of Dangerous Goods on Land"
First Aid and Emergency Response
In case of poisoning, contact a doctor or Poisons Information Centre (Phone Australia 131 126, New Zealand 0800 764 766).
Inhalation: Remove victim from exposure, remove contaminated clothing, allow comfortable position, and keep warm. Seek medical advice if effects persist.
Skin Contact: Immediately flush skin and hair with running water. Continue flushing for 15 minutes or until advised to stop by medical professionals.
Eye Contact: Immediately irrigate with copious quantities of water for 15 minutes with eyelids held open. Urgently seek medical assistance and transport to hospital.
Ingestion: Rinse mouth with water. Do NOT induce vomiting. Give a glass of water to drink. Seek medical advice.
Note to Physicians: Treat symptomatically. The product can cause corneal burns.
References
- [1] SELLEYS_FIREPROOF_CEMENT-AUS_GHS.pdf
- [2] PROSERIES_FIREBLOCK_EXPORT-AUS_GHS.pdf