Product Facts
- Product Name
- Pro Trade Gap Filler Smooth Finish - 475g White Acrylic Sealant
- Availability
- In Stock
- Condition
- New
- Category
- Home & Garden > Building Materials & Hardware > Sealants & Fillers
- Seller
- Selleys
Pro Trade Gap Filler Smooth Finish - 475g White Acrylic Sealant
Pro-Trade Gap Filler Smooth Finish is a white, paintable, flexible acrylic gap sealant suitable for interior and exterior applications. Features high-solids formula for low shrinkage, thick consistency for smooth gunning, and excellent adhesion to timber, plasterboard, masonry, and aluminium. Paintable in approximately 30 minutes with ±10% movement capability. Skins in 20-30 minutes.
Product Data (OpenAI Spec)
View Full JSON Spec ↗Specifications
| Colour | White |
|---|---|
| Skin time | 20-30 minutes |
| Paint time | About 30 minutes |
| Technology | Water-based acrylic |
| Limitations | Not suitable for joints expecting movement beyond ±10%. Although suitable for exterior use, performance may depend on adequate paint over and surface conditions. Substrate and paint selection may affect final finish—some paints may crack. While paintable with water or oil-based paints, some water-based undercoats & flat paints may crack after drying—testing is recommended. |
| Directions for Use | 1. Clean surfaces: ensure substrate is firm, dry, free of dust, grease, loose material. 2. Load cartridge or tube, cut nozzle to required size. 3. Apply bead into gap/joint; thicken as needed but avoid overfilling. 4. Within ~20-30 minutes it skins; smooth/trowel finish as required. 5. Once cured (paint-ready in ~30 minutes under standard conditions) paint with water- or oil-based paint (for oil-based, ensure compatibility) 6. Clean tools and excess material while wet (water cleanup). |
| Movement capability | ±10% |
Product Intelligence
Pro Trade Gap Smooth Finish - Technical Specifications & Features
Product Overview
Pro Trade Gap Smooth Finish is a white acrylic gap filler product supplied by Selleys in 475g containers formatted as 20-pack units. The product is specifically designed for gap filling applications in construction and renovation work.
Product Identification
| Detail | Information |
|---|---|
| Product Name | Pro Trade Gap Smooth Finish |
| Product Code | 102106 |
| Barcode | 9300697129918 |
| Packaging | 475g, 20-pack containers |
| Recommended Use | Gap filler |
| Supplier | Selleys (DuluxGroup Australia Pty Ltd) |
Physical & Chemical Properties
Appearance & Form
- Form: Paste
- Colour: White
- Odour: Characteristic
Material Characteristics
- Solubility: Dispersible in water
- Specific Gravity: 1.57
- Relative Vapour Density (air=1): >1
- Viscosity: >21 mm²/s @ 40°C
Hazard Classification
Pro Trade Gap Smooth Finish is classified as hazardous according to Safe Work Australia GHS 7 criteria.
Hazard Statement
- Signal Word: Warning
- Hazard Classification: Sensitisation - Skin - Category 1
- Primary Hazard: H317 - May cause an allergic skin reaction
Safety & Handling Information
Personal Protection Equipment
Recommended PPE includes:
- Safety shoes
- Overalls
- Gloves (nitrile rubber recommended for intermittent contact)
- Safety glasses/eye protection
- Suitable respirator
Storage Requirements
Store in a cool, dry, well-ventilated place with the following specifications:
- Store out of direct sunlight
- Keep away from foodstuffs
- Store away from incompatible materials (oxidising agents)
- Store away from sources of heat and/or ignition
- Keep containers closed when not in use
Handling Instructions
- Avoid eye contact and skin contact
- Avoid inhalation of dust
- Do not eat, drink, or smoke while using
- Always wash hands before eating, drinking, or smoking
First Aid Measures
In Case of Exposure
Inhalation: Remove from exposure immediately; seek medical advice if effects persist.
Skin Contact: Effects may be delayed. Remove contaminated clothing and flush skin with running water. If swelling, redness, blistering, or irritation occurs, seek medical assistance.
Eye Contact: Wash out immediately with water and seek medical advice as a precautionary measure.
Ingestion: Rinse mouth with water. Do NOT induce vomiting. Give water to drink and seek medical advice.
Accidental Release Measures
Small Spills
Wear protective equipment to prevent contamination. Wipe up with absorbent material (clean rag or paper towels) and collect in properly labelled containers for disposal.
Large Spills
- Clear area of unprotected personnel
- Wear protective equipment
- Avoid generating dust
- Cover with damp absorbent material
- Sweep or vacuum carefully
- Notify local emergency services if environmental contamination occurs
Fire Fighting Information
- Specific Hazards: Non-combustible; however, residual material after aqueous component evaporation can burn if ignited
- Suitable Extinguishing Media: Water fog, alcohol resistant foam, standard foam, dry agents
- Fire Fighting Advice: Not combustible, but monitor residual material carefully
Transportation & Regulatory Compliance
Not classified as Dangerous Goods according to:
- Australian Code for the Transport of Dangerous Goods by Road & Rail
- New Zealand NZS5433: Transport of Dangerous Goods on Land
Key Features & Benefits
- White colour for aesthetic uniformity in finishing applications
- Paste form for easy application
- Water dispersible for convenient cleanup
- Skin sensitiser classification requires careful handling with appropriate PPE
- Low toxicity for acute exposures (LD50 > 2,000 mg/Kg based on ingredient estimates)
Important Precautionary Statements
- P102: Keep out of reach of children
- P103: Read carefully and follow all instructions
- P261: Avoid breathing dust, fume, gas, mist, vapours or spray
- P280: Wear protective gloves/protective clothing including eye/face protection and suitable respirator
- P302+P352: IF ON SKIN: Wash with plenty of water and soap
- P333+P313: If skin irritation or rash occurs: Get medical advice/attention
Emergency Contact Information
- Telephone: 1300 555 205 (Australia)
- Emergency Number: 1800 220 770 (Australia); 0800 220 770 (New Zealand)
- Poisons Information Centre: 131 126 (Australia); 0800 764 766 (New Zealand)
References
- [1] PRO_TRADE_GAP_SMOOTH_FINISH-AUS_GHS.pdf