Product Facts

Product Name
Selleys Point Works - Tile Pointing Compound
Availability
In Stock
Condition
New
Category
Home & Garden > Construction Adhesives & Sealants
Seller
Selleys
GTIN
unknown
Selleys Point Works - Tile Pointing Compound

Selleys Point Works - Tile Pointing Compound

Selleys Point Works is a tile pointing compound applied with a trowel and used to fasten (point) hip and ridge roof tiles. Forms an incredibly strong and durable bond between tiles and ridge. Passes fatigue loading conditions of Cyclonic Conditions (C3 & C4) as per Australian Standard AS2050-2018. Flexes with normal roof movement without cracking or breaking away. Ideal for new roofs and roof repairs.

Buy Now
Safety Data Sheet - AU
Technical Data Sheet - AU
GTIN:
unknown

Product Data (OpenAI Spec)

View Full JSON Spec ↗

Specifications

Safety Ensure adequate ventilation during use
Clean Up Solvent or mineral turps before cure
Cure Time 24 hours (depending on conditions)
Skin Time 30 minutes
Technology Polyurethane Construction Adhesive Sealant
Limitations Not suitable for application on wet or frozen surfaces Avoid application if rain is imminent Do not apply in wet conditions or if rain is expected within 12 hours
Paintability Yes (after curing)
Directions for Use 1. The following should only be used as a guide and the installer should apply all Australian Standards, BCA/NZBC requirements, and best practices when pointing roofs with Point Works Gen III. 2. Trowel Selleys Point Works Gen III to a thickness of 3 to 5 mm, ensuring that pointing has full contact with the roof tiles and under the edge of the hip/ridge tiles. Trowel in small runs to ensure a neat and clean finish. Sweep down each hip and ridge as pointing is complete to prevent excess product adhering to tiles. 3. Use a wet trowel to get a smooth finish. Regularly clean the trowel with water. Do not brush or sponge Selleys Point Works Gen III as this will damage the finished appearance. 4. In case of cold and damp conditions, use Pointworks Accelerant spray to speed up the drying. 5. Install weepholes in the pointing and the bedding mortar. Weepholes may be put in as you go or on completion of the job. 6. Regularly mix the product in the bucket to avoid skinning. If the product is left open for any period and a crust has formed, discard the dried crust material. The material below will be satisfactory. 7. Keep unused Selleys Point Works Gen III closely covered with the plastic sheet inside the bucket and replace lid firmly. On re-opening, remove plastic sheet and any skin formed around the edges, mix and use as normal. Before use, Selleys Point Works Gen III may be stirred to attain the desired trowelling consistency. Never add water to restore trowelling ability. 8. If mixing colour into Selleys Point Works Gen III, place the colour as deep as possible into the centre of the bucket. Mix with a power-driven mixing wand at low speed until the colour becomes consistent throughout.
Movement Capability +/- 25%
Service Temperature -20°C to 80°C
Suitable Substrates Metal Masonry Brick Concrete Tiles Timber
Mould and UV Resistance Yes
Application Temperature Range 5°C to 35°C

Product Intelligence

Selleys Point Works - Technical Details and Specifications

Product Overview

Selleys Point Works is an adhesive mechanical fastener specifically designed for use with Hip and Ridge tiles. This specialized product is available in an extensive range of color variants to match various roofing aesthetics.

Product Variants and Identification

Selleys Point Works is supplied in 10-liter containers and offers numerous color options, each with unique product codes and barcodes for proper identification:

  • Pointworks Burgundy 10L (Code: 103383, Barcode: 9300697119353)
  • Pointworks Burnt Orange/Earth 10L (Code: 103384, Barcode: 9300697117946)
  • Pointworks Charcoal/Soho Night 10L (Code: 103385, Barcode: 9300697124395)
  • Pointworks Cloud 10L (Code: 103788, Barcode: 9300697133526)
  • Pointworks Crimson/Aurora 10L (Code: 103386, Barcode: 9300697118004)
  • Pointworks Dark Grey/Barramundi 10L (Code: 103387, Barcode: 9300697117939)
  • Pointworks Desert Red 10L (Code: 103388, Barcode: 9300697119360)
  • Pointworks Grey/Saber 10L (Code: 103389, Barcode: 9300697117960)
  • Pointworks Jet Black/Sambuca 10L (Code: 103390, Barcode: 9300697118011)
  • Pointworks Kava/Silver Perch 10L (Code: 103367, Barcode: 9300697120267)
  • Pointworks Mahogany/Bungalow 10L (Code: 103368, Barcode: 9300697119834)
  • Pointworks Mid Grey/Babylon 10L (Code: 103369, Barcode: 9300697119032)
  • Pointworks Midnight Blue/Camelot 10L (Code: 103373, Barcode: 9300697124791)
  • Pointworks Neutral 10L (Code: 103374, Barcode: 9300697117984)
  • Pointworks Olive/Caraway 10L (Code: 103375, Barcode: 9300697124678)
  • Pointworks Outback Red/Saffron 10L (Code: 103376, Barcode: 9300697119018)
  • Pointworks Rainforrest/Wollemi 10L (Code: 103377, Barcode: 9300697119629)
  • Pointworks Ruby Red/Chilli 10L (Code: 103378, Barcode: 9300697124715)
  • Pointworks Terracotta/Cottage Red 10L (Code: 103380, Barcode: 9300697117892)
  • Pointworks Walnut/Aniseed 10L (Code: 103381, Barcode: 9300697119049)
  • Pointworks Wild Rice 10L (Code: 103382, Barcode: 9300697117908)
  • Point Works Salt Spray (Code: 103379, Barcode: 9300697133007)

Hazard Classification

Selleys Point Works is classified as hazardous according to Safe Work Australia GHS 7 criteria.

Key Hazard Information

Signal Word: Warning

Hazard Classification: Sensitisation - Skin - Category 1

Hazard Statement: H317 - May cause an allergic skin reaction

Safety Precautionary Statements

Prevention Precautionary Statements (P-Statements)

  • P102: Keep out of reach of children
  • P103: Read carefully and follow all instructions
  • P261: Avoid breathing dust, fume, gas, mist, vapours or spray
  • P272: Contaminated work clothing should not be allowed out of the workplace

Response Precautionary Statements

  • P101: If medical advice is needed, have product container or label at hand
  • P302+P352: IF ON SKIN: Wash with plenty of water and soap
  • P333+P313: If skin irritation or rash occurs: Get medical advice/attention
  • P362+P364: Take off contaminated clothing and wash it before reuse

Supplier Information

Manufacturer/Supplier: Selleys, a division of DuluxGroup (Australia) Pty Ltd

Company Details:

  • ABN: 67 000 049 427
  • Street Address: 1956 Dandenong Road, Clayton VIC 3168, Australia
  • Telephone: 1300 555 205

Storage and Handling Guidelines

Storage: Store unopened containers below 30°C in a cool, dry place away from direct sunlight. Unopened containers can be stored for 18 months from the date of manufacture.

Storage Notes: Opened pails may form skin and lumps near the opening. It is recommended to discard any lumps, while the remaining product can continue to be used.

Application and Coverage

Coverage: 20m²/10L using a Direct Stick trowel on plywood substrate

Application Limitations: Cure rate will be inhibited if air or substrate surface temperature is below 50°C

Clean-up: Spills and tools can be cleaned up with Mineral Turps before the product cures.

Technical Consultation

For specific technical inquiries or concerns regarding application and performance, Selleys Technical Services is available for consultation regarding fire-rated joint configurations and other technical matters.

Safety Documentation

Comprehensive warnings, first aid information, and shipping details for Selleys Point Works are available through the official Selleys website at www.selleys.com.

References

  • [1] SELLEYS_POINT_WORKS-AUS_GHS.pdf
  • [2] liquid-nails-timberflex-v-2-2-tds-7-3-25.pdf
↑ Back to top