Product Facts
- Product Name
- Selleys Pro Trade Construction Adhesive Fast Grip - 420g
- Availability
- In Stock
- Condition
- New
- Category
- Home & Garden > Adhesives & Sealants
- Seller
- Selleys
Selleys Pro Trade Construction Adhesive Fast Grip - 420g
Selleys Pro Trade Construction Adhesive Fast Grip is a water-based, high strength construction adhesive that provides strong initial holding power. Features strong initial grab, water-based formula, no drip/sag/stringing, and is paintable after 12 hours. Ideal for new roofs and repairs, especially where there's movement.
Product Data (OpenAI Spec)
View Full JSON Spec ↗Specifications
| Features | Strong initial grab, Water-based, No drip/sag/stringing, Paintable after 12 hours, Flexible |
|---|---|
| Technology | Water-based adhesive |
| Limitations | Probably not suitable for constant water exposure or permanent immersion (not explicitly rated for that). Needs curing before final paint. |
| Appearance/Colour | Beige |
| Directions for Use | 1. Ensure surfaces are clean, dry and free of dust or grease. 2. Apply adhesive where required using cartridge gun or suitable applicator. 3. Press or clamp surfaces accordingly. 4. Clean up excess before cure. 5. Allow 12+ hours before painting. |
| Suitable Substrates | Most building materials (roofing, etc.) |
Product Intelligence
Pro Trade Construction Adhesive Fast Grip - 420g
Product Overview
Pro Trade Construction Adhesive Fast Grip is a high strength construction adhesive manufactured by Selleys that provides strong initial holding power with a water-based formulation. The product offers low odour characteristics and enables easy water clean-up, making it a practical choice for various construction bonding applications.
Product Information
| Specification | Details |
|---|---|
| Product Name | Pro Trade Construction Adhesive Fast Grip |
| Packaging | Cartridge |
| Size | 420g |
| Product Code | 102109 |
| Bar Code | 9300697129949 |
| Reference Number | SELGHSEN000859 |
| Colour | Beige |
| Physical Form | Paste |
| Recommended Use | General purpose building adhesive |
Key Features
- Strong initial grab - Provides rapid bonding capability
- High strength - Delivers durable bonds for structural requirements
- Flexible - Maintains flexibility after curing for stress relief
- No drip, sag or stringing - Clean application without excess material
- Fast clean up with water - Uncured product removes easily with water
- Paintable after 12 hours - Allows quick finishing options
Technical Specifications
Physical and Chemical Properties
| Property | Typical Result |
|---|---|
| Technology | Water-based |
| Colour | Beige |
| Odour | Mild |
| Specific Gravity | 1.44 |
| Viscosity | >20.5 mm²/s @ 40°C |
| Solubility | Miscible with water |
| Total VOC (g/Litre) | Not available |
| Relative Vapour Density (air=1) | >1 |
Bond Strength Performance
| Test Standard | Property | Result |
|---|---|---|
| AS 2329-1999D | Initial Bond Strength | >200 kPa |
| AS 2329-1999E | Bond Strength in Tensile Shear | >1.5 MPa |
| AS 2329-1999F | Bond Strength in Peel | ~40N/25mm |
Curing and Service Performance
| Property | Result |
|---|---|
| Initial Cure | 24 hours |
| Full Cure Time | 72 hours |
| Service Temperature | Bonds will resist temporary exposure up to 140°C |
| Time to Join Surfaces | Within first 5 minutes |
| Minimum Set Before Removing Fasteners | 24 hours |
Suitable Application Materials
Pro Trade Construction Adhesive Fast Grip is suitable for use on the following substrates:
- Wood products: Timber, MDF, particleboard
- Building materials: Plasterboard, styrene foam, masonry, concrete
- Surfaces: Tiles, ceramics, metals, plastics*, rubber, glass
- Architectural elements: Skirting, cornices, architraves
Note: *Pre-test plastics to determine compatibility. Not suitable for polyethylene, polypropylene, Teflon, or silicone.
Application Methods
Pro Trade Construction Adhesive Fast Grip can be applied in the following ways:
- Along length of joists, studs or battens - Apply bead along the length
- Broad flat surfaces - Apply beads every 40 cm
- Higher initial grab technique - Apply to one surface only, press together, pull apart, and allow to dry for up to 5 minutes before firmly joining
Surface Preparation Requirements
Surfaces must be properly prepared before application:
- Clean and dry
- Free from dirt, grease, oil, or water
- All loose material removed
Approved Applications
- Interior applications - Suitable for indoor use
- Sheltered exterior applications - Protected outdoor surfaces only
Limitations and Restrictions
- Not suitable for structural bonding - Should not be used as the sole bonding agent for structural bonding applications
- Not for mirrors - Use Selleys Liquid Nails Mirror Metal & Glass instead
- Not for metals heated by direct sunlight - Bonds weaken at higher temperatures
- Avoid tightly clamped joints - Not recommended for cabinet making or joinery
Standards Compliance
- Australian Standard AS 2329 (1999) - Pro Trade Construction Adhesive Fast Grip meets this construction adhesive standard
- Green Building Council VOC Limits - Meets VOC limits for multipurpose construction adhesives
Standards and Certifications
The product is classified as a Class 3 Flammable Liquid and is not classified as Dangerous Goods according to:
- Australian Code for the Transport of Dangerous Goods by Road & Rail
- New Zealand NZS5433: Transport of Dangerous Goods on Land
- International Maritime Dangerous Goods Code (IMDG Code)
- International Air Transport Association (IATA) Dangerous Goods Regulations
Hazard Classification
Hazard Statement: H317 - May cause an allergic skin reaction
Hazard Classification: Sensitisation - Skin - Category 1
Personal Protection Equipment
For safe handling of Pro Trade Construction Adhesive Fast Grip:
- Safety shoes
- Overalls
- Gloves (Nitrile rubber gloves are suitable for intermittent contact)
- Safety glasses
Storage Conditions
- Store in a cool, dry place
- Store away from sources of heat and/or ignition
- Store away from incompatible materials (oxidising agents)
- Keep container standing upright
- Keep containers closed when not in use
Clean Up
- Uncured product: Remove with water
- Cured product: Remove by scraping or sanding
Safety Data Sheet Access
Comprehensive warnings, first aid information, and shipping details for Pro Trade Construction Adhesive Fast Grip can be found in the product Safety Data Sheet (SDS) available through www.selleys.com.
References
- [1] PRO_TRADE_CONSTRUCTION_ADHESIVE_FAST_GRIP-AUS_GHS.pdf
- [2] pro-trade-construction-adhesive-fast-grip-tds.pdf
- [10] directory/business_homepage/selleys.md