Product Facts
- Product Name
- Selleys Grout Stain Whitener - 280g
- Availability
- In Stock
- Condition
- New
- Category
- Home & Garden > Cleaning & Maintenance > Grout & Tile Care
- Seller
- Selleys
Selleys Grout Stain Whitener - 280g
Selleys Grout Stain Whitener will restore the grout in your bathroom and kitchen. Get rid of stains and brighten up your tiles with our powerful cleaner. Covers and whitens stains caused by mould growth, in-ground dirt, or from spilt makeup or hair-dye. Breaks the mould cycle by creating a barrier that makes it difficult for mould spores to take hold. Contains a fungicide to help prevent mould re-growth.
Product Data (OpenAI Spec)
View Full JSON Spec ↗Specifications
| Use | Interior |
|---|---|
| Size | 280mL Tube |
| Safety | Wearing gloves, apron and old clothing is recommended. |
| Colours | White |
| Technology | Water Based |
| Limitations | Do not use on unglazed or porous tiles and stone. Not recommended for tiles with intricate patterns or grooves from which the product may be difficult to remove. |
| Directions for Use | 1. Clean tiled area and grout thoroughly. Ensure that the area is dry. Wearing gloves, apron and old clothing is recommended. 2. Press foam applicator firmly against grout and apply even pressure to the tube while moving applicator along grout lines 3. Allow to dry for at least 30minutes, then check if sufficiently dry by wiping over with a damp cloth. If product is not dry, allow a longer drying time (no more than 2 hours). 4. When dry, remove excess with a lint free damp cloth or sponge, wiping diagonally across the grout line. A Selleys Super Cloth is ideal. 5. Reapply where too little product was applied or too much was wiped off. 6. After use, rinse sponge tilting downwards under tap. Blot dry and replace lid firmly until next use. 7. Allow at least 5 hours before treated area is exposed to water. |
Product Intelligence
Selleys Grout Stain Whitener - Technical Details and Specifications
Product Identification
Selleys Grout Stain Whitener is a commercial whitening product specifically designed for grout stains. The product is identified by the following details:
- Product Code: Grout Stain Whitener
- Bar Code: 9300697118165
- Recommended Use: Whitener for grout stains
- Manufacturer: Selleys (a division of DuluxGroup)
- Company ABN: 67 000 049 427
- Location: 1956 Dandenong Road Clayton VIC 3168 Australia
Hazard Classification
This material is classified as hazardous according to the criteria of Safe Work Australia GHS 7. The product carries a Warning signal word.
Hazard Classifications
- Eye Damage/Irritation - Category 2A
- Sensitisation - Skin - Category 1
Hazard Statements
- H317: May cause an allergic skin reaction
- H319: Causes serious eye irritation
Safety and Precautionary Statements
Prevention Precautionary Statements
- P102: Keep out of reach of children
- P103: Read carefully and follow all instructions
- P261: Avoid breathing dust, fume, gas, mist, vapours or spray
- P264: Wash hands, face and all exposed skin thoroughly after handling
- P272: Contaminated work clothing should not be allowed out of the workplace
- P280: Wear protective gloves/protective clothing including eye/face protection and suitable respirator
Response Precautionary Statements
- P101: If medical advice is needed, have product container or label at hand
- P302+P352: IF ON SKIN: Wash with plenty of water and soap
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing
- P333+P313: If skin irritation or rash occurs: Get medical advice/attention
- P337+P313: If eye irritation persists: Get medical advice/attention
- P362+P364: Take off contaminated clothing and wash it before reuse
Dangerous Goods Classification
Selleys Grout Stain Whitener is NOT classified as Dangerous Goods by the criteria of:
- The "Australian Code for the Transport of Dangerous Goods by Road & Rail"
- The "New Zealand NZS5433: Transport of Dangerous Goods on Land"
Poison Schedule: Not Applicable
Chemical Composition
The product contains the following chemical entities at specified proportions:
| Chemical Entity | CAS Number | Proportion |
|---|---|---|
| 1,2-Benzisothiazol-3(2H)-one (BIT) | 2634-33-5 | <0.05% (w/w) |
| 5-Chloro-2-methyl-4-isothiazolin-3-one (CMIT) | 26172-55-4 | <0.05% (w/w) |
| 2-Methyl-2H-isothiazol-3-one (MIT) | 2682-20-4 | <0.05% (w/w) |
| 2-Octyl-2H-isothiazol-3-one (OIT) | 26530-20-1 | <0.05% (w/w) |
| Balance | — | Non-hazardous or below reporting limits |
First Aid Measures
In case of poisoning, contact a doctor or Poisons Information Centre (Australia: 131 126; New Zealand: 0800 764 766).
Inhalation: Remove victim from exposure and avoid becoming a casualty. Remove contaminated clothing and allow the patient to assume the most comfortable position. Keep warm and at rest until fully recovered. Seek medical advice if effects persist.
Skin Contact: Effects may be delayed. Remove contaminated clothing and flush skin and hair with running water. If swelling, redness, blistering or irritation occurs, seek medical assistance.
Eye Contact: Hold eyelids apart and flush eyes continuously with running water for at least 15 minutes. Continue flushing until advised to stop or transport to hospital.
Ingestion: Rinse mouth with water. Do NOT induce vomiting. Give a glass of water to drink. Never give anything by mouth to an unconscious patient. Seek medical advice.
Personal Protective Equipment for First Aiders: Wear safety shoes, overalls, gloves, and safety glasses. Nitrile rubber gloves are suitable for intermittent contact.
Emergency Contact Information
- Emergency Telephone (Australia): 1800 220 770
- Emergency Telephone (New Zealand): 0800 220 770
Regulatory Compliance
All components of this product are listed on or exempt from:
- The Australian Inventory of Industrial Chemicals (AIIC)
- The New Zealand Inventory of Chemical (NZIoC)
The product is governed by the HSNO Group Standard HSR002530 - Cleaning Products (Subsidiary Hazard) Group Standard 2020.
Safety Data Sheet Information
The Safety Data Sheet has been prepared by Chemical Data Services Pty Ltd on behalf of Selleys. Users are advised to review the current Safety Data Sheet prior to use, as these documents are updated frequently to ensure the most current safety information is available.
References
- [1] SELLEYS_GROUT_STAIN_WHITENER-AUS_GHS.pdf