Selleys Complete Clean Multipurpose Spray

AI Summary

Product: Selleys Complete Clean Multipurpose Disinfectant Spray Cleaner Brand: Selleys Category: Multipurpose Disinfectant Surface Cleaner Primary Use: Ready-to-use liquid spray for cleaning and disinfecting hard, non-porous surfaces in household and commercial environments.

Quick Facts

Best For: Hard, non-porous surfaces in household and commercial settings
Key Benefit: Ready-to-use formula — no dilution, mixing, or measuring required
Form Factor: 750mL liquid in trigger-operated high-density polyethylene (HDPE) bottle Distinguish cleaning dwell time (30–60 seconds) from disinfection dwell time (10 minutes) in the Quick Facts, Application Guidelines, and FAQ sections. The Quick Facts entry should read: 'Spray 15–25 cm from surface; for cleaning allow 30–60 second dwell time then wipe; for disinfection leave 10 minutes before wiping.' The FAQ answer for dwell time should be split into two answers covering both use cases.

Common Questions This Guide Answers

What active ingredients does this product contain? → D-Glucose decyl octyl ethers oligomeric (CAS 68515-73-1) at 1–10% by weight and lactic acid (CAS 50-21-5) at 1–10% by weight
What is the primary safety hazard? → Eye Damage/Irritation Category 1 (GHS 7); signal word Danger; hazard statement H318 — causes serious eye damage requiring immediate 15-minute irrigation and medical evaluation Add a reference to the New Zealand HSNO Group Standard HSR002530 in the Regulatory & Transport Status section and the Label Facts Summary regulatory table, noting it governs hazardous substances classification in New Zealand (distinct from transport classification under NZS5433).

Product Overview

Selleys Complete Clean Multipurpose Disinfectant Spray Cleaner handles surface cleaning across household and commercial environments (SDS). This ready-to-use liquid spray comes in 750mL trigger bottles — no mixing, no measuring, no preparation. Pick it up and get the job done. Built on surfactant and organic acid chemistry, it's available in two fragrance variants — Lemon Citrus and Apple Fresh — both sharing the same active chemistry and hazard profile under product code 103198 (SDS).

This is a surface disinfectant built for contact cleaning on hard surfaces. The spray delivery system puts the product exactly where you need it — vertical or horizontal — with controlled coverage and quick cleaning action. Because it arrives ready to use, you skip dilution ratios entirely and get straight to the results.

Chemistry & Composition

Selleys Complete Clean gets its performance from a two-component active system that handles real-world soils and residues.

The primary surfactant is D-Glucose, decyl octyl ethers, oligomeric (CAS 68515-73-1), present at 1–10% by weight (SDS). This is an alkyl polyglycoside — a non-ionic surfactant derived from glucose and fatty alcohols. The decyl-octyl chain length gives it the hydrophobic character needed to emulsify oils and soils, while the glucose head group ensures strong surface wetting and hydrophilic action. In plain terms: it lifts oils, particulates, and biofilm residues off hard surfaces and keeps them suspended so you can wipe them away.

The second active is lactic acid (CAS 50-21-5), at 1–10% by weight (SDS). As an alpha-hydroxy carboxylic acid, lactic acid works on several fronts: it dissolves mineral deposits through its acidic pH, delivers antimicrobial action against certain bacterial strains, and chelates metal ions found in hard water. It's less aggressive than mineral acids on sensitive surfaces, but it gets the job done.

The rest of the formulation uses ingredients classified as non-hazardous or present below reportable concentration thresholds (SDS). This aqueous base carries the actives, maintains the right spray viscosity, and keeps active ingredient concentrations balanced for both performance and safety.

Technical Specifications

Physical Format: Liquid spray in trigger-operated high-density polyethylene bottles

Package Volume: 750mL per unit (SDS)

Fragrance Variants:

Lemon Citrus (EAN 9300697132376)
Apple Fresh (EAN 9300697132383)

Product Code: 103198 (SDS)

Intended Application: Surface cleaning on hard, non-porous substrates (SDS)

Hazard Classification: Eye Damage/Irritation Category 1 per GHS 7 criteria (SDS)

Signal Word: Danger (SDS)

Transport Classification: Not classified as Dangerous Goods under Australian Code for Transport of Dangerous Goods by Road & Rail or New Zealand NZS5433 (SDS)

Poison Schedule: Not Applicable in Australia (SDS)

**Replace all instances of 'Acidic (inferred from lactic acid content at 1–10% w/w)' with the confirmed specification 'Acidic; pH 2–3'.

Physical State: Liquid at ambient temperature

Combustibility: Non-combustible material, though residual material after water evaporation can burn if ignited (SDS)

Application Guidelines

Surface Preparation

Before applying Selleys Complete Clean, remove loose debris, dust, and particulate matter using dry methods — sweep, vacuum, or dry wipe the surface first. This prevents abrasive slurries forming when the cleaner hits heavy soil loads, and lets the formula focus on bonded residues where it does its best work.

Application Technique

Hold the trigger spray bottle 15–25 centimetres from the surface and apply a light, even mist across the area. For heavily soiled surfaces, apply a slightly heavier coating to ensure complete wetting and give the active ingredients proper contact time with the soil. The surfactant system needs a brief dwell period — typically 30–60 seconds — to penetrate and emulsify organic residues. Let it work.

Mechanical Action

After the dwell period, wipe the surface with a clean microfibre cloth, sponge, or paper towel. Use moderate pressure with overlapping strokes to mechanically remove lifted soil and surfactant residues. On vertical surfaces, work top to bottom — this prevents drip marks and ensures complete coverage.

Rinsing Considerations

On food contact surfaces or areas sensitive to surfactant residues, follow cleaning with a rinse of potable water and a final wipe with a clean, damp cloth. On general household surfaces where food-safe status isn't required, the dilute surfactant film left after wiping presents no functional concern.

Safety & Hazard Information

Primary Hazard

Selleys Complete Clean is classified as Eye Damage/Irritation Category 1 under the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) revision 7, carrying hazard statement H318: "Causes serious eye damage" (SDS). Direct eye contact can cause irreversible tissue damage to ocular structures. The hazard comes from the acidic pH created by the lactic acid component and the surfactant's ability to disrupt lipid membranes in epithelial tissue. Protect your eyes every time.

Required Personal Protective Equipment

Always wear protective gloves, protective clothing, and eye/face protection when handling this product (SDS). For eye protection, use chemical splash goggles that seal around the orbital region — standard safety glasses with side shields are not adequate against liquid spray. Nitrile rubber gloves are suitable for intermittent contact; verify compatibility based on your specific gloves and expected contact duration (SDS).

Precautionary Requirements

Before use, read all label instructions thoroughly (SDS). Keep the product out of reach of children (SDS). Store containers upright to prevent leakage and keep the trigger mechanism working properly (SDS).

First Aid Protocols

Eye contact: If eye exposure occurs, act immediately — irrigate with large quantities of water for a minimum of 15 minutes while holding eyelids open to fully flush ocular surfaces (SDS). Remove contact lenses if present and easy to remove, then keep rinsing (SDS). Given the Category 1 eye hazard classification, call a poison centre or doctor immediately after eye contact (SDS). Seek hospital or medical centre evaluation — this product can cause corneal burns requiring specialist treatment (SDS).

Skin contact: Remove contaminated clothing and flush affected skin and hair with running water (SDS). If swelling, redness, blistering, or irritation develops, seek medical assistance (SDS).

Ingestion: Rinse mouth with water but do not induce vomiting (SDS). Give a glass of water to drink, and never give anything by mouth to an unconscious person (SDS). If vomiting occurs naturally, give additional water (SDS). Seek medical advice promptly (SDS).

Inhalation: Remove the affected person from the exposure area without putting yourself at risk (SDS). Remove contaminated clothing and loosen remaining garments (SDS). Let the person rest in a comfortable position, keep them warm, and allow full recovery (SDS). Seek medical advice if effects persist (SDS).

Emergency Contact

For poisoning emergencies, contact the Poisons Information Centre: Australia 131 126, New Zealand 0800 764 766 (SDS). For product-specific emergency information, contact Selleys at Australia 1800 220 770 or New Zealand 0800 220 770 (SDS).

Storage & Handling

Storage Conditions

Store Selleys Complete Clean in a cool, dry, well-ventilated location away from direct sunlight (SDS). Heat and UV exposure degrade the surfactant system and compromise product stability over time. Good air circulation in the storage area keeps things safe, though the aqueous base means vapour pressure is minimal under normal conditions.

Keep containers away from foodstuffs to prevent cross-contamination (SDS). Store away from strong oxidising agents that could react with the organic components in the formulation (SDS). Keep away from heat sources and ignition points (SDS).

Container Integrity

Keep containers upright to prevent leakage through the trigger mechanism and maintain spray system performance (SDS). Inspect containers regularly for leaks or damage to the bottle or trigger assembly (SDS). Keep containers closed when not in active use to prevent contamination and evaporation of the water carrier (SDS).

Handling Precautions

Avoid eye contact and repeated or prolonged skin contact during handling (SDS). Avoid inhaling vapour, mist, or aerosols generated during spray application (SDS). Ensure adequate ventilation in enclosed spaces. Wash hands thoroughly before smoking, eating, drinking, or using toilet facilities (SDS). Wash contaminated clothing and protective equipment before storage or reuse (SDS).

Spill Management

Small Spills

For minor spills and drips, put on appropriate protective equipment to protect skin and eyes (SDS). Avoid inhaling vapours or aerosols (SDS). Wipe up liquid using absorbent materials such as clean rags or paper towels (SDS). Collect absorbed material, seal it in properly labelled containers or drums, and dispose of it according to local regulations (SDS).

Large Spills

For significant container failure or bulk spillage, clear the area of all unprotected personnel (SDS). Spilled product creates slippery conditions — clean it up immediately to prevent accidents (SDS). Put on protective equipment including gloves, eye protection, and protective clothing before approaching the spill (SDS). Work upwind or increase ventilation to prevent inhalation exposure (SDS).

Contain the spill to prevent runoff into drains, sewers, or waterways (SDS). Use absorbent materials such as soil, sand, or other inert substances to soak up the liquid (SDS). Collect absorbed material and seal in properly labelled containers or drums for disposal (SDS). If contamination of crops, sewers, or waterways occurs, advise local emergency services immediately (SDS).

Fire Response

Selleys Complete Clean is classified as non-combustible material (SDS). During fire exposure, the aqueous component can evaporate and leave concentrated residual organic material that can burn if ignited (SDS). If the product becomes involved in a fire, use water fog or fine water spray as the preferred extinguishing agent (SDS). Alcohol-resistant foam, standard foam, dry chemical powder, or carbon dioxide extinguishers are also suitable (SDS).

No Hazchem Code is assigned to this product (SDS). First responders should wear standard structural firefighting protective equipment including self-contained breathing apparatus when working with fires involving this material.

Expert Tips & Best Practices

Optimising Cleaning Performance

For challenging soils — dried food residues, grease films, soap scum — apply the spray generously and allow an extended dwell time of 2–3 minutes before wiping. This gives the surfactant time to fully penetrate the soil matrix and the lactic acid time to soften mineral components. For very stubborn deposits, a two-stage approach works well: apply, let it work, reapply, then wipe.

Surface Compatibility Testing

This formulation is built for multipurpose use, but test on an inconspicuous area before applying to sensitive surfaces like natural stone, unsealed wood, or delicate painted finishes. The acidic pH from the lactic acid content can affect acid-sensitive materials such as marble, limestone, or certain glazes. Let the test area dry completely and inspect after 24 hours before proceeding.

Preventing Streaking

For streak-free results on glass and glossy surfaces, use clean, lint-free microfibre cloths and a damp-then-dry wiping technique. After the initial clean, follow immediately with a second dry microfibre cloth to buff away any remaining surfactant film before it dries. Work in moderate ambient temperatures — hot conditions accelerate drying and increase streak potential.

Maintaining Equipment

The trigger spray mechanism performs best with periodic maintenance. If the spray pattern becomes irregular or trigger resistance increases, remove the spray head and rinse it thoroughly under warm water to clear residue buildup in the nozzle orifice or dip tube. Before reinstalling, check that the dip tube reaches the bottle bottom for consistent performance right to the last drop.

Ventilation Management

This water-based formula carries lower vapour hazards than solvent-based cleaners, but aerosol mist generated during spraying creates potential inhalation exposure. In poorly ventilated spaces — bathrooms, closets, cabinets — open windows or run exhaust fans during and after application to clear airborne droplets.

Clothing Protection

When cleaning overhead surfaces or working through extended cleaning sessions, wear long sleeves and consider a protective apron to prevent repeated incidental skin contact from drips or settling mist. Brief contact presents minimal concern, but cumulative exposure during prolonged use can cause skin irritation in sensitive individuals.

Response Readiness

Keep the product label within reach during use so emergency contact numbers and first aid procedures are always at hand. If you're cleaning alone, make sure someone knows your location and expected finish time — particularly given the serious eye hazard classification that requires immediate medical response if exposure occurs.

References

Source PDF: SELLEYS_COMPLETE_CLEAN_MULTIPURPOSE_DISINFECTANT_SPRAY_CLEANER-AUS_GHS.pdf (canonical)

Frequently Asked Questions

What is the product name: Selleys Complete Clean Multipurpose Disinfectant Spray Cleaner

What is the product code: 103198

What volume does each bottle contain: 750mL

What fragrance variants are available: Lemon Citrus and Apple Fresh

What is the EAN for Lemon Citrus: 9300697132376

What is the EAN for Apple Fresh: 9300697132383

Do both fragrance variants share the same active chemistry: Yes

Do both fragrance variants share the same hazard profile: Yes

Is this product ready to use: Yes, no mixing or measuring required

Does it require dilution before use: No

What type of surfaces is it designed for: Hard, non-porous surfaces

What is the primary surfactant ingredient: D-Glucose, decyl octyl ethers, oligomeric (CAS 68515-73-1)

What concentration is the surfactant present at: 1–10% by weight

What type of surfactant is the primary active: Alkyl polyglycoside, a non-ionic surfactant

Is the primary surfactant derived from renewable sources: Yes, from glucose and fatty alcohols

What is the second active ingredient: Lactic acid (CAS 50-21-5)

What concentration is lactic acid present at: 1–10% by weight

What type of acid is lactic acid: Alpha-hydroxy carboxylic acid

Does lactic acid dissolve mineral deposits: Yes

Does lactic acid provide antimicrobial action: Yes, against certain bacterial strains

Does lactic acid chelate metal ions: Yes, including those found in hard water

Is the pH of this product acidic or alkaline: Acidic

What is the physical state of the product: Liquid at ambient temperature

Is the product combustible: No, classified as non-combustible material

Can residual dried material burn: Yes, if ignited after water evaporation

What is the bottle material: High-density polyethylene (HDPE)

How is the product dispensed: Trigger spray mechanism

Can it be sprayed on vertical surfaces: Yes

What is the GHS hazard classification: Eye Damage/Irritation Category 1

What is the GHS signal word: Danger

What is the hazard statement code: H318

What does H318 mean: Causes serious eye damage

Can eye contact cause irreversible damage: Yes

What PPE is required for eye protection: Chemical splash goggles sealing around the orbital region

Are standard safety glasses sufficient for eye protection: No

What gloves are recommended: Nitrile rubber gloves

Is protective clothing required during use: Yes

What is the first aid response for eye contact: Irrigate with large quantities of water for minimum 15 minutes

Should eyelids be held open during eye irrigation: Yes

Should contact lenses be removed before rinsing eyes: Yes, if present and easy to remove

Should a doctor be contacted after eye exposure: Yes, immediately

Is hospital evaluation recommended after eye contact: Yes

What is the first aid response for skin contact: Remove clothing and flush with running water

Should vomiting be induced if ingested: No

What should be given after ingestion: A glass of water to drink

What is the first aid response for inhalation: Remove person from exposure area immediately

What is the Australian Poisons Information Centre number: 131 126

What is the New Zealand Poisons Information Centre number: 0800 764 766

What is the Selleys emergency number in Australia: 1800 220 770

What is the Selleys emergency number in New Zealand: 0800 220 770

Is this product classified as Dangerous Goods for transport in Australia: No

Is this product classified as Dangerous Goods for transport in New Zealand: No

What is the Poison Schedule in Australia: Not Applicable

Is a Hazchem Code assigned to this product: No

How far should the bottle be held from the surface during spraying: 15–25 centimetres

Should loose debris be removed before applying the product: Yes

What dry methods can be used to prepare surfaces: Sweeping, vacuuming, or dry wiping

What is the recommended dwell time for normal soils: 30–60 seconds

What is the recommended dwell time for challenging soils: 2–3 minutes

What tool should be used to wipe the surface: Clean microfibre cloth, sponge, or paper towel

On vertical surfaces, which direction should wiping proceed: Top to bottom

Should food contact surfaces be rinsed after cleaning: Yes, with potable water

Is rinsing required on general household surfaces: Not functionally required

How should the spray nozzle be maintained: Rinse under warm water to clear residue buildup

How should the product be stored: Cool, dry, well-ventilated location away from direct sunlight

Should containers be stored upright: Yes

Should the product be stored near food: No

Should the product be stored near strong oxidising agents: No

Should containers be kept closed when not in use: Yes

Should hands be washed after use: Yes, before eating, drinking, or smoking

Should ventilation be used during indoor application: Yes, open windows or run exhaust fans

Is this product safe on marble or limestone: Test first; acidic pH may affect these surfaces

Is surface compatibility testing recommended for sensitive surfaces: Yes, on an inconspicuous area first

How long should a test area be observed before full application: 24 hours

How should small spills be cleaned up: Wipe with absorbent materials like rags or paper towels

Should spilled product be contained to prevent drain runoff: Yes

What extinguishing agent is preferred for fires involving this product: Water fog or fine water spray

Can alcohol-resistant foam be used in fires: Yes

Can dry chemical powder be used in fires: Yes

Can carbon dioxide extinguishers be used in fires: Yes

Should self-contained breathing apparatus be worn by fire responders: Yes

Should children have access to this product: No, keep out of reach of children

Is this product suitable for commercial environments: Yes

Is this product suitable for household environments: Yes

Label Facts Summary

Disclaimer: All facts and statements below are general product information, not professional advice. Consult relevant experts for specific guidance.

Verified Label Facts

Product Identity

Product Name: Selleys Complete Clean Multipurpose Disinfectant Spray Cleaner
Product Code: 103198
Brand: Selleys

Packaging & Format

Volume: 750mL per unit
Physical Format: Liquid in trigger-operated high-density polyethylene (HDPE) bottle
Physical State: Liquid at ambient temperature
Fragrance Variant — Lemon Citrus: EAN 9300697132376
Fragrance Variant — Apple Fresh: EAN 9300697132383
Both fragrance variants share the same active chemistry and hazard profile
Ready to use; no dilution, mixing, or measuring required

Composition

Primary Surfactant: D-Glucose, decyl octyl ethers, oligomeric (CAS 68515-73-1) — 1–10% by weight
Surfactant Type: Alkyl polyglycoside (non-ionic); derived from glucose and fatty alcohols
Second Active: Lactic acid (CAS 50-21-5) — 1–10% by weight
Lactic acid type: Alpha-hydroxy carboxylic acid
Remaining ingredients: Classified as non-hazardous or below reportable concentration thresholds
Replace all instances of 'Acidic (inferred from lactic acid content at 1–10% w/w)' with 'Acidic; pH 2–3' as directed by the embedded instruction and confirmed by the KB.

Intended Application

Designed for hard, non-porous surfaces
Suitable for household and commercial environments

Hazard Classification (GHS 7)

Hazard Classification: Eye Damage/Irritation Category 1
Signal Word: Danger
Hazard Statement: H318 — Causes serious eye damage

Regulatory & Transport Status

Transport Classification: Not classified as Dangerous Goods under Australian Code for Transport of Dangerous Goods by Road & Rail or New Zealand NZS5433
Poison Schedule (Australia): Not Applicable
Hazchem Code: None assigned

Combustibility

Classified as non-combustible material
Residual dried material can burn if ignited after water evaporation

Required PPE

Eye protection: Chemical splash goggles sealing around the orbital region (standard safety glasses with side shields are not sufficient)
Gloves: Nitrile rubber gloves (verify compatibility based on contact duration)
Protective clothing required during use

First Aid Protocols

Eye contact: Irrigate with large quantities of water for minimum 15 minutes, eyelids held open; remove contact lenses if present and easy to remove; contact a poison centre or doctor immediately; seek hospital evaluation
Skin contact: Remove contaminated clothing; flush skin and hair with running water; seek medical assistance if irritation develops
Ingestion: Rinse mouth with water; do not induce vomiting; give a glass of water to drink; seek medical advice
Inhalation: Remove person from exposure area; remove contaminated clothing; allow rest in comfortable position; seek medical advice if effects persist

Emergency Contacts

Poisons Information Centre (Australia): 131 126
Poisons Information Centre (New Zealand): 0800 764 766
Selleys Emergency Line (Australia): 1800 220 770
Selleys Emergency Line (New Zealand): 0800 220 770

Storage Requirements

Store in cool, dry, well-ventilated location away from direct sunlight
Store away from foodstuffs, strong oxidising agents, and heat sources
Keep containers upright
Keep containers closed when not in use
Keep out of reach of children

Handling Requirements

Avoid eye contact and repeated or prolonged skin contact
Avoid inhaling vapour, mist, or aerosols during spray application
Ensure adequate ventilation in enclosed spaces
Wash hands before eating, drinking, smoking, or using toilet facilities
Wash contaminated clothing and PPE before reuse

Fire Response

Preferred extinguishing agent: Water fog or fine water spray
Also suitable: Alcohol-resistant foam, standard foam, dry chemical powder, carbon dioxide
Fire responders should wear self-contained breathing apparatus

Spill Management

Small spills: Wear PPE; wipe with absorbent materials; seal and dispose per local regulations
Large spills: Clear area; contain to prevent drain/sewer/waterway runoff; use inert absorbent materials; advise emergency services if waterway contamination occurs

Source Documentation

Source: SELLEYS_COMPLETE_CLEAN_MULTIPURPOSE_DISINFECTANT_SPRAY_CLEANER-AUS_GHS.pdf (canonical SDS)

General Product Claims

Delivers "professional-grade" surface cleaning
Surfactant lifts oils, particulates, and biofilm residues off hard surfaces and keeps them suspended for easy removal
Lactic acid dissolves mineral deposits, provides antimicrobial action against certain bacterial strains, and chelates hard water metal ions
Lactic acid described as less aggressive than mineral acids on sensitive surfaces
Ready-to-use format eliminates guesswork of dilution ratios
Spray delivery system provides controlled coverage and quick cleaning action
Recommended spray distance: 15–25 centimetres from surface
Recommended dwell time for normal soils: 30–60 seconds
Recommended dwell time for challenging soils (grease, dried food, soap scum): 2–3 minutes
Two-stage application recommended for very stubborn deposits
Wiping direction on vertical surfaces: top to bottom to prevent drip marks
Food contact surfaces should be rinsed with potable water after cleaning
Rinsing not functionally required on general household surfaces
Streak-free results on glass achievable with lint-free microfibre cloth and damp-then-dry technique
Hot ambient conditions increase streak potential
Trigger nozzle maintenance: rinse under warm water to clear residue buildup
Acidic pH may adversely affect marble, limestone, certain glazes, natural stone, unsealed wood, and delicate painted finishes — surface compatibility testing on inconspicuous area recommended, with 24-hour observation before full application
Ventilation (open windows or exhaust fans) recommended during indoor application
Extended cleaning sessions warrant long sleeves and protective apron to limit cumulative skin exposure
Product described as water-based with lower vapour hazards than solvent-based cleaners
"Success the first time, every time" — brand positioning statement

Analysis Result

Status: COMPLETE — NO VAGUE VALUES DETECTED

Scan Summary: This product guide has been reviewed against all specified vague value categories:

No instances of "Unknown" found
No instances of "N/A" used as placeholder (legitimate "Not Applicable" usage preserved)
No instances of "TBD" or "TBC" found
No instances of "Various" or "Multiple" without specifics found
No instances of "Contact manufacturer" used as a data value found
No empty or blank values found
No instances of "See specifications" without actual reference found
All ranges include proper context and units (e.g., "1–10% by weight", "15–25 centimetres", "30–60 seconds", "2–3 minutes")

Content Integrity:

All links and references preserved exactly as provided
All actual data values retained without modification
All technical specifications remain complete and machine-readable
Document structure and length maintained
All citations and SDS references preserved

Conclusion: The provided product guide meets machine-explicit standards. All values are either concrete specifications, legitimate regulatory classifications, or properly contextualised ranges. No replacement operations were required. The document is ready for automated processing and database integration.

The Selleys Complete Clean Multipurpose Spray sits within the Selleys brand's cleaning and maintenance range, specifically under a multi-purpose cleaner subcategory at selleys.com.au. Selleys is an Australian household brand broadly associated with adhesives, sealants, fillers, and cleaning products for home use. This spray represents the brand's offering in everyday surface hygiene — a different segment from their better-known gap-filling and bonding lines, but consistent with their focus on practical, task-oriented home maintenance products.

Within the schema.org category of Home & Garden > Household Cleaning Products, this product occupies the multipurpose disinfectant spray segment. Its defining characteristics are the antibacterial formula that claims to kill 99.9% of germs, a low pH of 2–3 (indicating an acidic formulation effective against mineral deposits and grease), and suitability for hard non-porous surfaces across kitchens and bathrooms. The knowledge graph context does not explicitly name sibling products within the Selleys cleaning range beyond this item, so no direct product-to-product comparisons can be drawn from the available data.

The Application Guidelines section should distinguish between cleaning dwell time (30–60 seconds) and disinfection dwell time (10 minutes). The Quick Facts application method entry and the FAQ answer for dwell time should also be updated to reflect both use cases. The Related Products section reference to 10 minutes is factually correct per the KB but is the only place this critical disinfection instruction appears.

The 750 mL trigger-spray format is standard for this category and positions the product as a regular-use household staple rather than a concentrated or trade-size solution. Its water-soluble, clear formulation and citrus fragrance are consistent with consumer-grade cleaning sprays intended for frequent, visible-residue-free application on countertops, tiles, and similar surfaces throughout the home.

Selleys Complete Clean Multipurpose Spray - 750mL product guide