Product Facts
- Product Name
- Selleys Polyglaze Wheel Cleaner 500ml
- Availability
- In Stock
- Condition
- New
- Category
- Automotive > Car Care & Cleaning > Wheel Cleaners
- Seller
- Selleys
- GTIN
- unknown
Selleys Polyglaze Wheel Cleaner 500ml
Selleys Polyglaze Wheel Cleaner is suitable for all wheel types and effortlessly removes brake dust, road grime and dirt from wheels. It is easy to apply: simply spray on, wipe and hose off. Features a non-acid formula that leaves wheels sparkling clean.
Product Data (OpenAI Spec)
View Full JSON Spec ↗Specifications
| SG | 1.0 – 1.03 |
|---|---|
| Safety | Avoid contact with skin and eyes |
| Pack Size | 500ml bottle |
| Appearance | Water white liquid |
| Limitations | Avoid contact with skin and eyes Protect from freezing Do not apply to hot surfaces |
| Directions for Use | 1. Spray onto wheels. 2. Wipe with sponge. 3. Hose off immediately with water. |
Product Intelligence
Selleys Polyglaze Wheel Cleaner 500ml - Technical Details and Specifications
Product Identification
Selleys Polyglaze Wheel Cleaner is a specialized automotive cleaning product manufactured by Selleys, a division of DuluxGroup (Australia) Pty Ltd. The product is designed specifically for car cleaning and degreasing applications.
Supplier Information
- Manufacturer: Selleys, a division of DuluxGroup (Australia) Pty Ltd
- ABN: 67 000 049 427
- Address: 1956 Dandenong Road, Clayton, VIC 3168, Australia
- Telephone: 1300 555 205
- Emergency Contact: Australia – 1800 220 770; New Zealand – 0800 220 770
Hazard Classification
Selleys Polyglaze Wheel Cleaner is classified as hazardous according to Safe Work Australia GHS 7 criteria. The product carries a "Danger" signal word due to its corrosive and irritant properties.
Key Hazards
- Skin Corrosion/Irritation - Category 2: Causes skin irritation
- Eye Damage/Irritation - Category 1: Causes serious eye damage
Chemical Composition
The product contains the following key chemical entities:
| Chemical Entity | CAS Number | Proportion |
|---|---|---|
| Alcohols, C12-15, ethoxylated | 68131-39-5 | 1-10% (w/w) |
| Sodium hydroxide | 1310-73-2 | <1% (w/w) |
| Sodium tripolyphosphate | 7758-29-4 | <1% (w/w) |
| Non-hazardous ingredients | — | Balance to 100% |
Safety and Handling Requirements
Personal Protective Equipment
- Safety shoes, overalls, gloves, and safety glasses are required
- Nitrile rubber gloves are recommended for intermittent contact with the product
- Eye and face protection must be worn during handling
Hygiene Measures
- Keep away from food, drink, and animal feeding stuffs
- Avoid eating, drinking, or smoking during use
- Wash hands thoroughly before eating, drinking, smoking, or using the toilet
- Avoid direct skin and eye contact
- Keep away from contact with clothing
- Wash contaminated clothing before storage or reuse
- Ensure eyewash stations and safety showers are accessible near the workstation
First Aid Measures
In case of exposure, the following first aid procedures apply:
- Inhalation: Remove victim from exposure, loosen clothing, allow rest in comfortable position, and seek medical advice if effects persist
- Skin Contact: Immediately remove contaminated clothing and flush skin with running water for 15 minutes; transport to medical facility
- Eye Contact: Immediately irrigate eyes with copious quantities of water for 15 minutes with eyelids held open; seek urgent medical assistance and transport to hospital
- Ingestion: Rinse mouth with water, do NOT induce vomiting, give water to drink, and seek medical advice
Emergency Contact: Poisons Information Centre – Australia 131 126; New Zealand 0800 764 766
Fire Fighting Information
- Hazchem Code: Not applicable
- Specific Hazards: Non-combustible material; however, following evaporation of aqueous component, residual material can burn if ignited
- Suitable Extinguishing Media: Water fog, alcohol resistant foam, standard foam, or dry agent (carbon dioxide, dry chemical powder)
Accidental Release Procedures
Small Spills
- Wear protective equipment to prevent skin and eye contamination
- Avoid inhalation of vapours or dust
- Wipe up with absorbent material (clean rag or paper towels)
- Collect and seal in properly labelled containers for disposal
Large Spills
- Clear area of all unprotected personnel
- Wear protective equipment to prevent contamination
- Work upwind or increase ventilation
- Contain material to prevent runoff into drains and waterways
- Use absorbent material (soil, sand, or inert material)
- Collect and seal in labelled containers for disposal
- If contamination of crops, sewers, or waterways has occurred, advise local emergency services
Transport Classification
Selleys Polyglaze Wheel Cleaner is not classified as Dangerous Goods under:
- Australian Code for the Transport of Dangerous Goods by Road & Rail
- New Zealand NZS5433: Transport of Dangerous Goods on Land
Precautionary Statements
Prevention Statements
- P102: Keep out of reach of children
- P103: Read carefully and follow all instructions
- P264: Wash hands, face, and all exposed skin thoroughly after handling
- P280: Wear protective gloves/protective clothing including eye/face protection
Response Statements
- P101: If medical advice is needed, have product container or label at hand
- P302+P352: IF ON SKIN: Wash with plenty of water and soap
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes, remove contact lenses if present, continue rinsing
- P310: Immediately call a Poison Center/doctor
- P332+P313: If skin irritation occurs: Get medical advice/attention
- P362+P364: Take off contaminated clothing and wash before reuse
Recommended Use
The product is specifically recommended for car cleaning and degreasing applications, making it suitable for removing dirt, grime, and grease from vehicle wheels and related surfaces.
References
- [1] SELLEYS_POLYGLAZE_WHEEL_CLEANER-AUS_GHS.pdf