Product Facts
- Product Name
- Selleys Polyglaze Liquid Polish - 500mL
- Availability
- In Stock
- Condition
- New
- Category
- Automotive > Car Care & Detailing > Car Polish & Wax
- Seller
- Selleys
Selleys Polyglaze Liquid Polish - 500mL
Selleys Polyglaze Liquid Polish gives your car an instant shine and long lasting finish with no hard rubbing or buffing required. It is very easy to use: simply apply, allow to dry and wipe off. Suitable for all vehicles and car exterior panels. Features instant, long lasting shine with easy application.
Product Data (OpenAI Spec)
View Full JSON Spec ↗Specifications
| SG | 0.98 – 1.05 |
|---|---|
| Odour | Mild vanilla |
| Safety | Avoid contact with skin and eyes. Use in well ventilated area. |
| Pack Size | 500mL bottle |
| Appearance | Viscous white liquid |
| Limitations | Avoid contact with skin and eyes. Use in well ventilated area. Do not allow product to self-dry on surface. |
| Directions for Use | 1. Wash vehicle in cool shaded area. 2. Leave vehicle wet. 3. Apply with microfiber cloth one panel at a time. 4. Use clean cloth for final wipe. |
Product Intelligence
Selleys Polyglaze Liquid Polish - Technical Details and Specifications
Product Identification
Product Name: Polyglaze Liquid Polish
Recommended Use: Car care
Supplier: Selleys, a division of DuluxGroup (Australia) Pty Ltd
- ABN: 67 000 049 427
- Street Address: 1956 Dandenong Road, Clayton VIC 3168, Australia
- Telephone: 1300 555 205
- Emergency Telephone: Australia – 1800 220 770; New Zealand – 0800 220 770
Hazard Classification
Safety Classification: Based on available information, this material is not classified as hazardous according to the criteria of Safe Work Australia GHS 7.
Poison Schedule: Not Applicable
Dangerous Goods Classification: Not classified as Dangerous Goods by the criteria of the "Australian Code for the Transport of Dangerous Goods by Road & Rail" and the "New Zealand NZS5433: Transport of Dangerous Goods on Land".
Physical and Chemical Properties
The product exhibits the following characteristics:
| Property | Value |
|---|---|
| Form | Liquid |
| Color | Not specified in standard documentation |
| Odor | Characteristic |
| Solubility | Details not fully specified |
| Specific Gravity | Not available (NAv) |
| Relative Vapor Density (air=1) | Not available |
| Vapor Pressure | Not available |
| Flash Point (°C) | Not available |
| Explosion/Flammability Limits | Not available |
| Autoignition Temperature (°C) | Not available |
| Melting/Freezing Point (°C) | Not available |
| Boiling Point/Range (°C) | Not available |
| pH | Not available |
| Viscosity | Not available |
| Total VOC (g/Litre) | Not available |
Note: For complete and typical values of physical and chemical properties, consult the specification sheet.
Composition Information
The product contains ingredients determined to be non-hazardous or below reporting limits, comprising 100% (w/w) of the formulation.
First Aid Measures
General Poisoning: If poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 131 126, New Zealand 0800 764 766).
Inhalation: Remove victim from exposure while avoiding becoming a casualty. Remove contaminated clothing and loosen remaining clothing. Allow patient to assume the most comfortable position and keep warm. Keep at rest until fully recovered. Seek medical advice if effects persist.
Skin Contact: If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. If swelling, redness, blistering, or irritation occurs, seek medical assistance.
Eye Contact: If in eyes, wash out immediately with water. In all cases of eye contamination, it is a sensible precaution to seek medical advice.
Ingestion: Rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water to drink. Never give anything by mouth to an unconscious patient. If vomiting occurs, give further water. Seek medical advice.
Personal Protective Equipment for First Aiders: Wear safety shoes, overalls, gloves, and safety glasses. Nitrile rubber gloves are suitable for intermittent contact.
Fire Fighting Measures
Hazchem Code: Not applicable
Suitable Extinguishing Media: If material is involved in a fire, use:
- Water fog (or fine water spray if unavailable)
- Alcohol resistant foam
- Standard foam
- Dry agent (carbon dioxide, dry chemical powder)
Specific Hazards: Non-combustible material
Fire Fighting Advice: Not combustible; however, following evaporation of aqueous component, residual material can burn if ignited.
Handling and Storage
Handling Recommendations:
- Avoid eye contact and repeated or prolonged skin contact
- Avoid inhalation of vapour, mist, or aerosols
Storage Requirements:
- Store in a cool, dry, well-ventilated place away from direct sunlight
- Store away from foodstuffs and incompatible materials
- Store away from sources of heat and/or ignition
- Keep containers standing upright
- Keep containers closed when not in use and check regularly for leaks
Personal Protection Equipment
Required PPE: Safety shoes, overalls, gloves, and safety glasses
Glove Selection: Nitrile rubber gloves are recommended for intermittent contact, though the user should make a final assessment based on local conditions and glove construction variations.
Hygiene Measures:
- Keep away from food, drink, and animal feeding stuffs
- Do not eat, drink, or smoke while using the product
- Wash hands prior to eating, drinking, or smoking
- Avoid contact with clothing
- Ensure eyewash stations and safety showers are close to the workstation
Accidental Release Measures
Small Spills:
- Wear protective equipment to prevent skin and eye contamination
- Avoid inhalation of vapors or dust
- Wipe up with absorbent material (clean rag or paper towels)
- Collect and seal in properly labeled containers or drums for disposal
Large Spills:
- Clear area of all unprotected personnel
- Note: Material is slippery when spilt; avoid accidents and clean up immediately
- Wear protective equipment to prevent skin and eye contamination and inhalation of vapors
- Work upwind or increase ventilation
- Contain spill to prevent runoff into drains and waterways
- Use absorbent materials (soil, sand, or other inert material)
- Collect and seal in properly labeled containers or drums for disposal
- If contamination of crops, sewers, or waterways has occurred, advise local emergency services
Transport Classification
The product is not classified as dangerous goods under transport regulations for road, rail, marine, and air transport.
References
- [1] SELLEYS_POLYGLAZE_LIQUID_POLISH-AUS_GHS.pdf