Product Facts

Product Name
Selleys Fix & Go Super Glue - 3ml
Availability
In Stock
Condition
New
Category
Home & Garden > Adhesives & Glues > Super Glue
Seller
Selleys

Selleys Fix & Go Super Glue - 3ml

Fast-setting super glue that sets in just 10 seconds, creating a strong and durable bond. Dries clear and is heat and water resistant. Perfect for small precise repairs around the home on metal, wood, rubber, and most plastics. Technology: Cyanoacrylate. Suitable for metal, china, rubber, wood, and most plastics. Not suitable for polyethylene, polypropylene, or Teflon.

Product Data (OpenAI Spec)

View Full JSON Spec ↗

Specifications

Technology Cyanoacrylate
Limitations Not suitable for polyethylene, polypropylene or Teflon No gap filling capability Will not permanently bond glass
Full strength ~12 hours
Directions for Use 1. Pierce tube seal 2. Apply one drop to one surface only 3. Press surfaces together 4. Hold until bonded
Suitable Substrates Metal China Rubber Wood Most plastics
Important Information Surfaces must be close fitting and clean Apply a single drop only; excess slows curing

Product Intelligence

Selleys Fix & Go Super Glue - 3mL Technical Details

Product Identification

Selleys Fix & Go Super Glue is available in multiple convenient formats, including the 3mL variant. The product is marketed under Selleys' commercial assurance: "If it's Selleys it works."

Product Variants

The 3mL format is available in several configurations:

  • Selleys Fix&Go Liquid 3mL (Product Code: 103448, Barcode: 9300697100252)
  • Selleys Fix&Go Liquid Single Shot 3x1mL (Product Code: 103449, Barcode: 9300697124234)
  • Selleys Fix&Go Stand-up Tube 2x3mL (Product Code: 103450, Barcode: 9300697130280)

Primary Features

Intended Use

The product is formulated as an adhesive for general bonding applications.

Chemical Composition

The primary active ingredient is Ethyl cyanoacrylate, comprising greater than 60% (w/w) of the formulation, with additional non-hazardous ingredients making up the balance to achieve 100% composition.

Physical and Chemical Properties

The product exhibits the following technical specifications:

Property Value
Form Liquid
Color Colorless to clear
Odor Characteristic (pungent)
Solubility Insoluble in water
Specific Gravity Approximately 1.0
Relative Vapor Density Greater than 1 (air = 1)
Flash Point Below 23°C
Viscosity Greater than 20.5 mm²/s at 40°C

These specifications should be confirmed in the detailed specification sheet for complete technical property information.

Hazard Classification

The product is classified as hazardous according to Safe Work Australia GHS 7 criteria.

Hazard Categories

  • Flammable Liquids - Category 4
  • Skin Irritation - Category 2
  • Eye Irritation - Category 2A
  • Specific Target Organ Toxicity (Single Exposure) - Category 3 Respiratory Tract Irritation

Hazard Statements

  • H227: Combustible liquid
  • H315: Causes skin irritation
  • H319: Causes serious eye irritation
  • H335: May cause respiratory irritation

Poison Schedule

The product is classified as Poison Schedule S5 - Caution

Safety Precautions and Personal Protection

Personal Protection Equipment Required

  • Safety shoes
  • Overalls
  • Protective gloves (nitrile rubber recommended for intermittent contact)
  • Chemical goggles and eye/face protection
  • Suitable respirator when necessary

Storage Requirements

  • Store in a well-ventilated place
  • Keep container tightly closed
  • Store cool (away from heat)
  • Keep locked up
  • Avoid elevated temperatures and sources of ignition

Handling Precautions

  • Use only outdoors or in well-ventilated areas
  • Avoid breathing dust, fumes, gas, mist, vapors, or spray
  • Avoid eye contact and repeated or prolonged skin contact
  • Ensure eyewash stations and safety showers are available near workstations

Dangerous Goods Classification

The product is not classified as Dangerous Goods by:

  • Australian Code for the Transport of Dangerous Goods by Road & Rail
  • New Zealand NZS5433: Transport of Dangerous Goods on Land
  • International Maritime Dangerous Goods Code (IMDG Code)
  • International Air Transport Association (IATA) Dangerous Goods Regulations

However, it is classified as C1 (Combustible Liquid) for storage and handling purposes under AS 1940.

First Aid Measures

Emergency Contact Numbers:

  • Australia: 1800 220 770
  • New Zealand: 0800 220 770
  • Poisons Information Centre: Australia 131 126, New Zealand 0800 764 766

Emergency Procedures

Inhalation: Remove victim from exposure, remove contaminated clothing, allow comfortable breathing position, keep warm, and seek medical advice if effects persist.

Skin Contact: Immediately remove contaminated clothing and flush skin with running water, continue for 15 minutes or as directed by Poisons Information Centre/Doctor.

Eye Contact: Rinse cautiously with water for several minutes and remove contact lenses if present and easy to do.

Ingestion: Rinse mouth with water without inducing vomiting, and seek medical advice.

Storage and Transport Information

The product should be stored in accordance with AS 1940 requirements for combustible liquids. Refer to state regulations for specific storage and transport requirements. The product is thermally stable when stored and used as directed.

Incompatible Materials

The product should not be mixed with oxidising agents.

Regulatory Status

  • AIICS Status: All components are listed on or exempt from the Australian Inventory of Industrial Chemicals
  • NZ EPA Status: All components are listed on or exempt from the New Zealand Inventory of Chemicals (NZIoC)
  • HSNO Group Standard: HSR002670 - Surface Coatings and Colourants (Combustible) Group Standard 2020

References

  • [1] SELLEYS_FIX_GO_SUPER_GLUE-AUS_GHS.pdf
↑ Back to top