Product Facts
- Product Name
- Selleys Araldite Super Strong Epoxy Adhesive
- Availability
- In Stock
- Condition
- New
- Category
- Home & Garden > Adhesives & Glues
- Seller
- Selleys
Selleys Araldite Super Strong Epoxy Adhesive
For the most heavy-duty repairs, this product provides a super strong bond and a 5-minute set time. Araldite Super Strong Epoxy Adhesive is designed for load bearing repairs, broken furniture, woodworking or concrete repair with a crystal-clear finish. Features maximum-strength epoxy bond, high chemical and heat resistance, and long working time for detailed jobs. Two-part epoxy adhesive with approximately 90 minutes working time and full cure in 24 hours.
Product Data (OpenAI Spec)
View Full JSON Spec ↗Specifications
| Full Cure | ~24 hours |
|---|---|
| Technology | Two-part epoxy adhesive |
| Limitations | Not suitable for polyethylene or polypropylene. Not recommended for flexible materials. |
| Mixing Ratio | Mix equal parts resin and hardener |
| Working Time | approx. 5 minutes |
| Handling Strength | ~6 hours |
| Directions for Use | 1. Mix components thoroughly. 2. Apply to one surface. 3. Join and clamp. 4. Allow full cure before stressing joint. |
| Suitable Substrates | Metal Wood Ceramics Rigid plastics (not PE/PP) Glass |
Product Intelligence
Selleys Araldite Super Strength Epoxy Adhesive - Technical Details and Specifications
Product Overview
Selleys Araldite Super Strength Epoxy Adhesive is a two-part epoxy resin adhesive designed for bonding rigid plastics, glass, metal, china, and wood. The product is manufactured and supplied by Selleys, a division of DuluxGroup (Australia) Pty Ltd, and is available in multiple sizes including 24mL, 35mL, and 200mL variants.
Product Components and Composition
The adhesive system consists of two distinct parts:
Part A (Resin Component)
- Physical Form: Cream-colored liquid
- Reference Number: SELGHSEN000085
- Specific Gravity: 1.15
- Viscosity: 17,000-30,000 cPa.s at 25°C
- Primary Chemical Composition: Contains Oxirane, 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis- (over 60% w/w)
- Secondary Components: Bisphenol A epoxy resin (1-10% w/w) and Bisphenol F epoxy resin (1-10% w/w)
Part B (Hardener Component)
- Physical Form: Light yellow liquid
- Reference Number: SELGHSEN000797
- Specific Gravity: Not specified in available documentation
- Primary Chemical Composition: Pentaerythritol-propylene oxide-mercaptoglycerol polymer and related amine hardeners
Physical and Chemical Properties
The adhesive demonstrates the following characteristics:
| Property | Specification |
|---|---|
| Overall Form | Two-part liquid system |
| Color | Cream (Part A), Light yellow (Part B) |
| Odor | Characteristic |
| Solubility | Insoluble in water |
| Thermal Stability | Stable when stored and used as directed |
| Flash Point | Greater than 200°C |
| Boiling Point | Greater than 200°C |
Hazard Classification and Safety
Selleys Araldite Super Strength Epoxy Adhesive is classified as a hazardous material according to Safe Work Australia GHS 7 criteria:
- Classification: Class 9 Miscellaneous Dangerous Good
- Poison Schedule: Schedule 5 (Caution)
- Transport Classification: Dangerous goods for both Australian Code for the Transport of Dangerous Goods by Road & Rail and New Zealand NZS5433
- Hazard Statements: Environmentally hazardous substance
Handling and Storage Requirements
Storage Conditions
- Store in a cool, dry, well-ventilated place away from direct sunlight
- Store away from foodstuffs and incompatible materials
- Store away from sources of heat and ignition
- Keep containers closed when not in use
- Check regularly for leaks
- Store locked up
Handling Precautions
- Avoid eye contact and skin contact
- Avoid inhalation of vapor, mist, or aerosols
- Use in well-ventilated environments
- Proper container management to prevent spillage and cross-contamination
Personal Protection Equipment
When handling Selleys Araldite Super Strength Epoxy Adhesive, users must wear:
- Rubber boots
- Overalls
- Gloves (Nitrile rubber gloves are suitable for intermittent contact)
- Aprons
- Face shields
First Aid and Emergency Response
Skin Contact
Effects may be delayed. Flush skin and hair with running water. If swelling, redness, blistering, or irritation occurs, seek medical assistance immediately.
Eye Contact
Immediately irrigate with copious quantities of water for 15 minutes. Hold eyelids open. Remove contaminated clothing and wash skin. Urgently seek medical assistance.
Inhalation
Remove victim from exposure and allow them to assume the most comfortable position. Keep at rest until fully recovered. Seek medical advice if effects persist.
Fire Fighting
- Hazchem Code: 2X
- Suitable Extinguishing Media: Water fog, alcohol resistant foam, standard foam, dry agent (carbon dioxide, dry chemical powder)
- Specific Hazard: Combustible material
- Fire Response: Emit toxic fumes when burning or decomposing; fire fighters must wear self-contained breathing apparatus
Product Variants
The product is available in multiple size options:
- 24mL variant - Product code 930069710638400
- 35mL variant - Product code 9300697101396
- 200mL variant - Product code 930069710040501
Incompatible Materials
- Oxidising agents should not be mixed or stored with this adhesive product
Classification and Regulatory Compliance
The product must comply with multiple regulatory frameworks:
- Australian Code for the Transport of Dangerous Goods by Road & Rail
- New Zealand NZS5433: Transport of Dangerous Goods on Land
- Safe Work Australia occupational exposure and workplace hazard regulations
- The Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP)
References
- [1] SELLEYS_ARALDITE_SUPER_STRENGTH_EPOXY_ADHESIVE_-_PART_B-AUS_GHS.pdf
- [4] SELLEYS_ARALDITE_5_MINUTE_EPOXY_ADHESIVE_-_PART_B-AUS_GHS.pdf
- [6] SELLEYS_ARALDITE_5_MINUTE_EPOXY_ADHESIVE_-_PART_A-AUS_GHS.pdf