Selleys Araldite Rapid Epoxy Adhesive - 14mL

Product Overview

Selleys Araldite Rapid 90 Seconds is a two-part epoxy adhesive system available in a 14mL container format. This product is manufactured by Selleys, a division of DuluxGroup (Australia) Pty Ltd, and is designed for rapid bonding applications where quick cure times are essential.

Product Identification

The 14mL variant of Selleys Araldite Rapid 90 Seconds is identified by the following specifications:

• Product Code: 103793
• Barcode: 9300697124647
• Recommended Use: Two-part epoxy adhesive with a 50:50 ratio
• Supplier: Selleys, a division of DuluxGroup (Australia) Pty Ltd

Physical and Chemical Properties

Part B (Hardener Component)

Appearance and Form:

• Form: Paste
• Colour: Clear light yellow
• Odour: Characteristic

Density and Volatility:

• Specific Gravity: 1.1–1.2
• Relative Vapour Density (air=1): >1
• Vapour Pressure: <0.1 hPa @ 20°C (indicating low volatility)

Thermal and Flammability Characteristics:

• Flash Point: >200°C
• Boiling Point: Not available

Viscosity and Solubility:

• Viscosity: 9,000–13,000 mPa·s
• Solubility: Insoluble in water

pH: >150 (indicates a highly alkaline product)

Hazard Classification

This material is hazardous according to the criteria of Safe Work Australia GHS 7 with the following classifications:

• Skin Irritation: Category 2
• Eye Irritation: Category 2A
• Sensitisation (Skin): Category 1

Hazard Statements:

• H315: Causes skin irritation
• H317: May cause an allergic skin reaction
• H319: Causes serious eye irritation

Chemical Composition

The primary active ingredient in the Part B (hardener) component includes:

• Pentaerythritol-propylene oxide-mercaptoglycerol polymer (>60% w/w)
• 1,8-Diazabicyclo[5.4.0]undec-7-ene (1–10% w/w)
• Ethanamine, 2,2'-oxybis[N,N-dimethyl-] (1–10% w/w)
• Additional non-hazardous ingredients (Balance)

Storage and Handling Requirements

Storage Conditions:

• Store in a cool, dry, well-ventilated place away from direct sunlight
• Store away from foodstuffs and incompatible materials
• Store away from sources of heat and/or ignition
• Keep containers closed when not in use

Handling Precautions:

• Avoid eye contact and skin contact
• Avoid inhalation of vapours, mist, or aerosols
• Ensure eyewash stations and safety showers are accessible

Personal Protection Equipment

Required PPE:

• Rubber boots, overalls, gloves, apron, and face shield
• Nitrile rubber gloves are suitable for intermittent contact (though final assessment should consider local conditions and glove construction variations)
• Always wash hands before smoking, eating, drinking, or using the toilet

Hygiene Measures:

• Keep away from food, drink, and animal feeding stuffs
• Wash contaminated clothing and protective equipment before storing or reusing

Stability and Reactivity

Chemical Stability: This material is thermally stable when stored and used as directed.

Conditions to Avoid:

• Elevated temperatures
• Sources of ignition

Incompatible Materials: Oxidising agents

Hazardous Decomposition Products: Oxides of carbon and nitrogen, smoke, and other toxic fumes

First Aid Measures

Skin Contact: Effects may be delayed. Immediately remove contaminated clothing and flush skin and hair with running water. Continue flushing until advised by Poisons Information Centre or for 15 minutes before seeking medical attention.

Eye Contact: Hold eyelids apart and flush eyes continuously with running water for at least 15 minutes. Seek urgent medical assistance.

Inhalation: Remove victim from exposure. Remove contaminated clothing and loosen remaining clothing. Keep at rest until fully recovered and seek medical advice if effects persist.

Ingestion: Rinse mouth with water. Do NOT induce vomiting. Give a glass of water to drink and seek medical advice.

Transport Classification

Dangerous Goods Classification:

• Not classified as Dangerous Goods by the criteria of the "Australian Code for the Transport of Dangerous Goods by Road & Rail" and the "New Zealand NZS5433: Transport of Dangerous Goods on Land"
• Poison Schedule: S5. Caution

Applications

Selleys Araldite Rapid 90 Seconds is designed for bonding rigid plastics, glass, metal, china, and wood, making it suitable for a wide range of industrial and domestic applications where rapid adhesive bonding is required.

References

• [1] SELLEYS_AUTO_FIX_ARALDITE_5_MINUTE_EPOXY_ADHESIVE_-_PART_B-AUS_GHS.pdf
• [2] SELLEYS_ARALDITE_RAPID_90_SECONDS_-_PART_A-AUS_GHS.pdf
• [3] SELLEYS_ARALDITE_RAPID_90_SECONDS_-_PART_B-AUS_GHS.pdf