Product Facts
- Product Name
- Selleys Araldite Extra Time Epoxy Adhesive 200ml
- Availability
- In Stock
- Condition
- New
- Category
- Home & Garden > Adhesives & Glues
- Seller
- Selleys
Selleys Araldite Extra Time Epoxy Adhesive 200ml
Leverage our longer working time Araldite epoxy for large surface areas or multi-assembly jobs. Perfect for benchtops, flooring, coatings, structural application or load-bearing repairs where you need 60 minutes of working time. Features longer working time for precise alignment, high-strength durable epoxy bond, and is suitable for larger or complex assemblies with a clear finish.
Product Data (OpenAI Spec)
View Full JSON Spec ↗Specifications
| Full Cure | ~24 hours |
|---|---|
| Technology | Two-part epoxy adhesive |
| Limitations | Not suitable for flexible materials Not suitable for polyethylene or polypropylene |
| Working Time | approx. 90 minutes |
| Handling Strength | ~6 hours |
| Directions for Use | 1. Mix resin and hardener in equal parts. 2. Apply adhesive; position carefully. 3. Clamp or support as required. 4. Allow full cure for maximum strength. |
| Suitable Substrates | Metal Wood Glass Ceramics Rigid plastics (not PE/PP) |
Product Intelligence
Selleys Araldite Extra Time 60 Min Epoxy Adhesive - Technical Details and Specifications
Product Identification
Selleys Araldite Extra Time 60 Min Epoxy Adhesive is a two-part epoxy adhesive system designed for bonding rigid materials. The 200mL variant is identified by:
- Product Code: 103792
- Barcode: 9300697133472
- Supplier: Selleys, a division of DuluxGroup (Australia) Pty Ltd
Physical and Chemical Properties
Form and Appearance
The adhesive is supplied in Part A as a liquid with specific physical characteristics:
- Form: Liquid
- Color: Light cream
- Odor: Mild characteristic odor
Key Physical Parameters
The product demonstrates the following measured properties:
| Property | Value |
|---|---|
| Specific Gravity | 1.15 g/cm³ |
| Relative Vapor Density (air=1) | >1 |
| Flash Point | 210°C (PMCC) |
| Boiling Point | >200°C |
| Viscosity | 17,000 - 30,000 mPa·s @ 25°C |
| pH | Approx. 6 (500 g/L aqueous solution) |
| Vapor Pressure | <0.001 hPa @ 20°C |
Chemical Composition
The adhesive contains several key chemical components:
- Epoxy Resin (>60% w/w): CAS No. 1675-54-3
- Bisphenol-A Epoxy Resin (1-10% w/w): CAS No. 25068-38-6
- Bisphenol F Epoxy Resin (1-10% w/w): CAS No. 9003-36-5
- Non-hazardous ingredients: Balance to 100%
Hazard Classification and Safety
Hazard Information
According to Safe Work Australia GHS 7 criteria, the product is classified with the following hazards:
- Skin Irritation - Category 2
- Eye Irritation - Category 2A
- Skin Sensitization - Category 1
Signal Word
Warning
Hazard Statements
- H315: Causes skin irritation
- H317: May cause an allergic skin reaction
- H319: Causes serious eye irritation
Dangerous Goods Classification
The product is classified as Dangerous Goods Class 9 under:
- Australian Code for the Transport of Dangerous Goods by Road & Rail
- New Zealand NZS5433: Transport of Dangerous Goods on Land
Poison Schedule: S5 (Caution)
Thermal and Chemical Stability
Chemical Stability: This material is thermally stable when stored and used as directed.
Conditions to Avoid: Elevated temperatures and sources of ignition
Incompatible Materials: Oxidizing agents
Hazardous Decomposition Products: Oxides of carbon and nitrogen, smoke, and other toxic fumes
Personal Protection Equipment Requirements
When handling the adhesive, the following protective equipment is recommended:
- Protective Gloves: Nitrile rubber gloves suitable for intermittent contact
- Protective Clothing: Protective clothing including eye/face protection
- Additional Precautions: Avoid skin contact, eye contact, and inhalation of dust/vapor
First Aid Measures
Skin Contact
Effects may be delayed. If contact occurs, immediately remove contaminated clothing and flush skin and hair with running water. Continue flushing until advised to stop by a medical professional or for 15 minutes, then transport to a doctor or hospital.
Eye Contact
Hold eyelids apart and flush eyes continuously with running water for at least 15 minutes, then transport to a doctor or hospital.
Storage and Handling Guidelines
- Store in a cool, dry, well-ventilated place away from direct sunlight
- Keep away from foodstuffs and incompatible materials
- Store away from sources of heat and ignition
- Keep containers closed when not in use
References
- [1] ARALDITE_EXTRA_TIME_60_MIN_EPOXY_ADHESIVE_-_PART_A-AUS_GHS.pdf