Product Facts

Product Name
Selleys Point Works - Tile Pointing Compound
Availability
In Stock
Condition
New
Category
Home & Garden > Building & Construction Materials > Adhesives & Sealants
Seller
Selleys
Selleys Point Works - Tile Pointing Compound

Selleys Point Works - Tile Pointing Compound

Selleys Point Works is a tile pointing compound applied with a trowel and used to fasten (point) hip and ridge roof tiles. Forms an incredibly strong and durable bond between tiles and ridge. Passes fatigue loading conditions of Cyclonic Conditions (C3 & C4) as per Australian Standard AS2050-2018. Flexes with normal roof movement without cracking or breaking away. Ideal for new roofs and roof repairs.

Buy Now
Safety Data Sheet - AU
Technical Data Sheet - AU
View Product Guide

Product Data (OpenAI Spec)

View Full JSON Spec ↗

Specifications

Safety Ensure adequate ventilation during use.
Clean Up Solvent or mineral turps before cure
Cure Time 24 hours (depending on conditions)
Skin Time 30 minutes
Technology Polyurethane Construction Adhesive Sealant
Limitations Not suitable for application on wet or frozen surfaces. Avoid application if rain is imminent. Do not apply in wet conditions or if rain is expected within 12 hours.
Paintability Yes (after curing)
Directions for Use 1. The following should only be used as a guide and the installer should apply all Australian Standards, BCA/NZBC requirements, and best practices when pointing roofs with Point Works Gen III. 2. Trowel Selleys Point Works Gen III to a thickness of 3 to 5 mm, ensuring that pointing has full contact with the roof tiles and under the edge of the hip/ridge tiles. Trowel in small runs to ensure a neat and clean finish. Sweep down each hip and ridge as pointing is complete to prevent excess product adhering to tiles. 3. Use a wet trowel to get a smooth finish. Regularly clean the trowel with water. Do not brush or sponge Selleys Point Works Gen III as this will damage the finished appearance. 4. In case of cold and damp conditions, use Pointworks Accelerant spray to speed up the drying. 5. Install weepholes in the pointing and the bedding mortar. Weepholes may be put in as you go or on completion of the job. 6. Regularly mix the product in the bucket to avoid skinning. If the product is left open for any period and a crust has formed, discard the dried crust material. The material below will be satisfactory. 7. Keep unused Selleys Point Works Gen III closely covered with the plastic sheet inside the bucket and replace lid firmly. On re-opening, remove plastic sheet and any skin formed around the edges, mix and use as normal. Before use, Selleys Point Works Gen III may be stirred to attain the desired trowelling consistency. Never add water to restore trowelling ability. 8. If mixing colour into Selleys Point Works Gen III, place the colour as deep as possible into the centre of the bucket. Mix with a power-driven mixing wand at low speed until the colour becomes consistent throughout.
Movement Capability +/- 25%
Service Temperature -20°C to 80°C
Suitable Substrates Metal Masonry Brick Concrete Tiles Timber
Mould and UV Resistance Yes
Application Temperature Range 5°C to 35°C

Product Intelligence

Selleys Point Works - Technical Details, Specifications, Features & Entities

Product Overview

Selleys Point Works is an adhesive mechanical fastener product designed specifically for use with Hip and Ridge tiles. The product is available in multiple color variants to match various roof tile options.

Product Variants & Identification

Selleys Point Works is available in an extensive range of color options in 10L packaging, including:

  • Pointworks Neutral 10L (Product Code 103374, Barcode 9300697117984)
  • Pointworks Grey/Saber 10L (Product Code 103389, Barcode 9300697117960)
  • Pointworks Dark Grey/Barramundi 10L (Product Code 103387, Barcode 9300697117939)
  • Pointworks Olive/Caraway 10L (Product Code 103375, Barcode 9300697124678)
  • Pointworks Walnut/Aniseed 10L (Product Code 103381, Barcode 9300697119049)
  • Pointworks Terracotta/Cottage Red 10L (Product Code 103380, Barcode 9300697117892)
  • Point Works Salt Spray (Product Code 103379, Barcode 9300697133007)

Additional variants include colors such as Burgundy, Burnt Orange/Earth, Charcoal/Soho Night, Cloud, Crimson/Aurora, Desert Red, Jet Black/Sambuca, Kava/Silver Perch, Mahogany/Bungalow, Mid Grey/Babylon, Midnight Blue/Camelot, Outback Red/Saffron, Rainforrest/Wollemi, Ruby Red/Chilli, and Wild Rice.

Hazard Classification & Safety

Selleys Point Works is classified as hazardous according to Safe Work Australia GHS 7 criteria with the following hazard profile:

  • Hazard Classification: Sensitisation - Skin - Category 1
  • Hazard Statement: H317 - May cause an allergic skin reaction
  • Signal Word: Warning

Prevention Precautions

  • Keep out of reach of children
  • Read carefully and follow all instructions
  • Avoid breathing dust, fume, gas, mist, vapours or spray
  • Contaminated work clothing should not be allowed out of the workplace

Response Precautions

  • If medical advice is needed, have product container or label at hand
  • If on skin: Wash with plenty of water and soap
  • If skin irritation or rash occurs: Get medical advice/attention
  • Take off contaminated clothing and wash it before reuse

Regulatory Compliance

Selleys Point Works complies with the following regulatory frameworks:

  • Australian Inventory of Industrial Chemicals (AIIC): All components listed or exempt
  • New Zealand Inventory of Chemical (NZIoC): All components listed or exempt
  • HSNO Group Standard: HSR002670 - Surface Coatings and Colourants (Subsidiary Hazard) Group Standard 2020
  • Transport Classification: Not classified as Dangerous Goods under Australian Code for Transport of Dangerous Goods by Road & Rail or New Zealand NZS5433
  • Marine Transport: Not classified as Dangerous Goods under IMDG Code
  • Air Transport: Not classified as Dangerous Goods under IATA Dangerous Goods Regulations

The product is not subject to:

  • Montreal Protocol (Ozone depleting substances)
  • The Stockholm Convention (Persistent Organic Pollutants)
  • The Rotterdam Convention (Prior Informed Consent)
  • Basel Convention (Hazardous Waste)

Manufacturer & Contact Information

Supplier: Selleys, a division of DuluxGroup (Australia) Pty Ltd
ABN: 67 000 049 427
Street Address: 1956 Dandenong Road, Clayton VIC 3168, Australia
Telephone: 1300 555 205

Documentation & Support

The Safety Data Sheet for Selleys Point Works has been prepared by Chemical Data Services Pty Ltd (chemdata.com.au) on behalf of Selleys. Safety Data Sheets are updated frequently, and users should ensure they have a current copy. Users should contact the manufacturer if clarification or further information is needed to ensure appropriate assessment prior to usage.

References

  • [1] PRO_TRADE_CONSTRUCTION_ADHESIVE_FAST_GRIP-AUS_GHS.pdf
  • [2] SELLEYS_POINT_WORKS-AUS_GHS.pdf
  • [3] SELLEYS_NO_MORE_GAPS_TIMBER_FLOORS-AUS_GHS.pdf
↑ Back to top