Product Facts

Product Name
Selleys Point Works Accelerant Spray - 5L
Availability
In Stock
Condition
New
Category
Home & Garden > Adhesives & Sealants > Construction Adhesives
Seller
Selleys
Selleys Point Works Accelerant Spray - 5L

Selleys Point Works Accelerant Spray - 5L

Selleys Point Works Gen II Accelerant Spray is specifically formulated to accelerate the setting of Point Works. Gen II flexible roof pointing in cool and damp conditions to reduce the risk of washouts. Features fast setting for urgent jobs with easy aerosol application. Accelerates to approximately 5 minutes skin time and speeds up full cure to 6-8 hours.

Buy Now
Safety Data Sheet - AU
Technical Data Sheet - AU
View Product Guide

Product Data (OpenAI Spec)

View Full JSON Spec ↗

Specifications

Clean Up Solvent
Cure Time Speeds up full cure to ~6–8 hours
Skin Time Accelerates to ~5 minutes (with Point Works)
Technology Curing accelerator for polyurethane
Limitations Do not use with other sealants. Avoid direct contact with skin and eyes
Paintability Yes (once sealant is cured)
Directions for Use 1. Apply Selleys Point Works as usual. 2. Lightly spray Accelerant over the bead from ~30cm away. 3. Avoid puddling or heavy application. 4. Allow to cure – typically skin forms in ~5 minutes, full cure in 6–8 hours.
Movement Capability N/A (used in combination)
Suitable Substrates Used to accelerate curing of Selleys Point Works
Mould and UV Resistance N/A
Service Temperature Range N/A
Application Temperature Range 5°C to 35°C

Product Intelligence

Selleys Point Works Gen II Accelerant Spray - 5L Technical Details & Specifications

Product Identification

Product Name: Point Works Gen II Accelerant Spray

Product Code: 9300697118691

Bar Code: 9300697118691

Supplier: Selleys, a division of DuluxGroup (Australia) Pty Ltd

Recommended Use: To accelerate drying of Point Works, applied using a spray bottle

Hazard Classification

This material is hazardous according to the criteria of Safe Work Australia GHS 7.

Signal Word: Warning

Hazard Classification:

  • Eye Damage/Irritation - Category 2A

Hazard Statement:

  • H319 Causes serious eye irritation

Physical and Chemical Properties

The product exhibits the following characteristics:

Property Value
Form Liquid
Color Clear, colorless
Odor Odorless
Solubility Soluble in water
Specific Gravity 1.07
pH 8.1
Flash Point Not applicable (non-combustible)
Boiling Point Exceeds 200°C
Thermal Stability Stable when stored and used as directed

Composition Information

Active Component:

  • Calcium chloride, dihydrate: 10 - 30% (w/w) (CAS NO: 10035-04-8)
  • Ingredients determined to be non-hazardous or below reporting limits: Balance to 100%

Precautionary Statements

Prevention Statements:

  • P102 Keep out of reach of children
  • P103 Read carefully and follow all instructions
  • P264 Wash hands, face and all exposed skin thoroughly after handling
  • P280 Wear protective gloves/protective clothing including eye/face protection

Response Statements:

  • P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
  • P337+P313 If eye irritation persists: Get medical advice/attention
  • P101 If medical advice is needed, have product container or label at hand

Personal Protection Equipment

Recommended PPE:

  • Safety shoes
  • Overalls
  • Gloves (nitrile rubber gloves are suitable for intermittent contact)
  • Safety glasses

Fire Fighting Measures

Suitable Extinguishing Media:

  • Water fog (or fine water spray)
  • Alcohol resistant foam
  • Standard foam
  • Dry agent (carbon dioxide, dry chemical powder)

Specific Hazards: Non-combustible material. However, following evaporation of aqueous component, residual material can burn if ignited.

Storage and Handling

Handling Precautions:

  • Avoid eye contact and skin contact
  • Avoid inhalation of vapour, mist or aerosols

Storage Conditions:

  • Store in a cool, dry, well-ventilated place
  • Store out of direct sunlight
  • Store away from foodstuffs
  • Store away from incompatible materials (oxidising agents)
  • Store away from sources of heat and/or ignition
  • Keep containers closed when not in use
  • Check regularly for leaks

Dangerous Goods Classification

Transport Classification: Not classified as Dangerous Goods by the criteria of the "Australian Code for the Transport of Dangerous Goods by Road & Rail" and the "New Zealand NZS5433: Transport of Dangerous Goods on Land"

Poison Schedule: Not Applicable

Toxicological Profile

The material has been classified as:

  • Not hazardous for acute inhalation exposure
  • Not hazardous for acute dermal exposure
  • Not hazardous for acute ingestion exposure
  • Not a mutagen
  • Not a carcinogen
  • Not a reproductive toxicant
  • Not an aspiration hazard

First Aid Measures

Exposure Route First Aid Procedure
Eye Contact Hold eyelids apart and flush continuously with running water for at least 15 minutes. Transport to Doctor or Hospital.
Skin Contact Remove contaminated clothing and flush skin with running water. Seek medical assistance if swelling, redness, blistering or irritation occurs.
Inhalation Remove victim from exposure. Allow patient to assume comfortable position and keep warm. Seek medical advice if effects persist.
Ingestion Rinse mouth with water. Do NOT induce vomiting. Give a glass of water to drink. Seek medical advice.

Emergency Contact: Contact Poisons Information Centre (Australia: 131 126, New Zealand: 0800 764 766)

Product Application Information

The accelerant spray functions as a drying accelerator for Point Works products, enhancing the curing process when applied to wet material shortly after application.

References

  • [1] POINT_WORKS_GEN_II_ACCELERANT_SPRAY-AUS_GHS.pdf
  • [3] tds_pointworks-gen-ii_v1-2.pdf
↑ Back to top