Product Facts
- Product Name
- Selleys Liquid Nails Mirror & Metal Adhesive 310g
- Availability
- In Stock
- Condition
- New
- Category
- Home & Garden > Adhesives & Sealants
- Seller
- Selleys
- MPN
- LN-Mirror-Metal-310g
Selleys Liquid Nails Mirror & Metal Adhesive 310g
Specially formulated neutral cure silicone adhesive perfect for mirrors and metal. Non-corrosive on mirrors and will not de-silver mirror backing. High strength, moisture and heat resistant, suitable for interior and exterior use with excellent adhesion to smooth, non-porous surfaces.
Product Data (OpenAI Spec)
View Full JSON Spec ↗Specifications
| Colour | White |
|---|---|
| Strength | High strength, flexible bond |
| Cure Time | 7 days (full strength) |
| Technology | Neutral cure silicone |
| Limitations | Not suitable for polyethylene, polypropylene, or Teflon®. Not suitable for aquariums or below-waterline applications. Must be applied to one surface only when bonding mirrors. |
| Paintability | No |
| Water Resistance | Excellent |
| Directions for Use | 1. Ensure surfaces are clean, dry, and free of dust or oils. 2. Cut cartridge tip, screw on nozzle, and load into caulking gun. 3. Apply vertical beads to the back of the mirror. 4. Immediately press mirror into position with adequate support. 5. Do not cover adhesive with tape or sealants until fully cured. 6. Allow 7 days for full cure. 7. Clean up uncured adhesive with mineral turps or a silicone remover. |
| Indoor/Outdoor Use | Indoor Outdoor |
| Suitable Materials | Mirror Metal Glass Tiles Ceramics |
| Service Temperature | -60°C to 150°C |
| Application Temperature | 5°C to 35°C |
Product Intelligence
Selleys Liquid Nails Mirror & Metal Adhesive: Technical Details and Specifications
Product Overview
Selleys Liquid Nails Mirror Metal Glass is a high strength construction adhesive specifically designed for bonding mirror, metal, and glass materials. This premium grade adhesive is manufactured by Selleys, a division of DuluxGroup (Australia) Pty Ltd, and is engineered to provide reliable and durable bonding performance for specialized applications.
Product Identification
| Detail | Information |
|---|---|
| Product Name | Selleys Liquid Nails Mirror Metal Glass |
| Recommended Use | High strength construction adhesive for bonding to mirror, metal and glass material |
| Bar Code | 9300697115218 |
| Supplier | Selleys, a division of DuluxGroup (Australia) Pty Ltd |
| Telephone | 1300 555 205 |
| Emergency Contact | Australia: 1800 220 770; New Zealand: 0800 220 770 |
Physical and Chemical Properties
The adhesive exhibits the following documented physical and chemical characteristics:
| Property | Specification |
|---|---|
| Form | Paste |
| Color | Clear with light yellow tinge |
| Odour | Mild and characteristic |
| Solubility | Insoluble in water |
| Specific Gravity | NAv (Not available in standard sheet) |
| Relative Vapour Density | >1 (air=1) |
| Vapour Pressure | NAv |
| Flash Point | <23°C |
| Viscosity | >20.5 mm²/s @40°C |
| pH | NAv |
Note: Consult the specification sheet for complete typical values and detailed technical properties of the material.
Hazard Classification and Safety
Hazard Identification
This material is hazardous according to the criteria of Safe Work Australia GHS 7.
Hazard Classifications
- Eye Damage/Irritation - Category 2A
- Sensitisation - Skin - Category 1
Hazard Statements
- H317: May cause an allergic skin reaction
- H319: Causes serious eye irritation
Key Safety Information
Signal Word: Warning
The product requires careful handling and appropriate personal protective equipment. Persons conducting disposal, recycling, or reclamation activities must use appropriate personal protection equipment including safety shoes, overalls, gloves, and eye/face protection.
Prevention and Response Precautionary Statements
Prevention Measures (Selection)
- Keep out of reach of children
- Read carefully and follow all instructions
- Avoid breathing dust, fume, gas, mist, vapours or spray
- Wash hands, face and all exposed skin thoroughly after handling
- Wear protective gloves, protective clothing, and eye/face protection
Response Measures
- Skin Contact: Wash with plenty of water
- Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing
- If skin irritation or rash occurs: Get medical advice/attention
- If eye irritation persists: Get medical advice/attention
Acute Health Effects
If mishandled or overexposure occurs, the following acute effects may arise:
- Inhalation: May cause irritation to mucous membranes and respiratory tract; may cause possible allergic reactions
- Skin Contact: Results in irritation; classified as a skin sensitiser; repeated or prolonged contact may lead to allergic contact dermatitis
- Eye Contact: An eye irritant; may cause serious eye irritation
- Ingestion: Can result in nausea, vomiting, and irritation of the gastrointestinal tract
Dangerous Goods Classification
Not classified as Dangerous Goods by the criteria of:
- The "Australian Code for the Transport of Dangerous Goods by Road & Rail"
- The "New Zealand NZS5433: Transport of Dangerous Goods on Land"
- The International Maritime Dangerous Goods Code (IMDG Code) for sea transport
- The International Air Transport Association (IATA) Dangerous Goods Regulations for air transport
Application Information
The adhesive is suitable for mirror and glass assembly applications. When applying to mirrors, the product requires specific application techniques. For vinyl backed mirrors, special application methods should be followed to ensure optimal adhesion.
Storage and Handling
- Store in a cool, dry, well-ventilated place
- Keep away from sources of heat and/or ignition
- Store away from incompatible materials (oxidising agents)
- Maintain chemical stability through proper storage as directed
Composition
The product contains several chemical entities including:
- 2-Butanone, O,O',O"-(methylsilylidyne)trioxime (1-10% w/w)
- 2-Butanone, O,O',O"-(ethenylsilylidyne)trioxime (1-10% w/w)
- Cyclotetrasiloxane, octamethyl- (<1% w/w)
- Methyl ethyl ketoxime (<1% w/w)
First Aid and Emergency Procedures
In case of poisoning, contact a doctor or Poisons Information Centre (Australia: 131 126; New Zealand: 0800 764 766).
First Aid Recommendations
- Inhalation: Remove victim from exposure; avoid becoming a casualty. Allow comfortable positioning and keep warm until fully recovered
- Skin Contact: If swelling, redness, blistering, or irritation occurs, remove contaminated clothing and flush with running water; seek medical assistance
- Eye Contact: Hold eyelids apart and flush continuously with water for at least 15 minutes; transport to doctor or hospital
- Ingestion: Rinse mouth with water; do NOT induce vomiting; seek medical advice
Safety Data Sheet Access
Comprehensive warnings, first aid information, and shipping details are available through the Selleys website (www.selleys.com) in the product Safety Data Sheet.
References
- [1] SELLEYS_LIQUID_NAILS_MIRROR_METAL_GLASS-AUS_GHS.pdf
- [2] SELLEYS_LIQUID_NAILS_DIRECT_STICK_LF__Discontinued_2024_-AUS_GHS.pdf