{
  "id": "web-crawled-products/selleys-no-more-cracks-small-cracks-dents-13",
  "title": "Selleys No More Cracks Small Cracks & Dents 13",
  "slug": "web-crawled-products/selleys-no-more-cracks-small-cracks-dents-13",
  "description": "",
  "category": "",
  "content": "## AI Summary\n\n**Product:** Selleys No More Cracks RTU Cracks & Dents\n**Brand:** Selleys (a division of DuluxGroup Australia Pty Ltd)\n**Category:** Ready-to-use interior paste filler\n**Primary Use:** Fills small cracks and dents in interior surfaces such as plaster, plasterboard walls, ceilings, cornices, and architraves without mixing or preparation.\n\n### Quick Facts\n- **Best For:** DIYers and tradespeople repairing hairline cracks, small dents, and minor surface defects on interior walls and ceilings before painting\n- **Key Benefit:** Ready-to-use straight from the container — no mixing, no preparation, consistent texture every time\n- **Form Factor:** Single-component paste (tan coloured, mild characteristic odour); available in 350g, 520g, 750g, and 1.6kg\n- **Application Method:** Press firmly into crack or dent with a filling knife, leave slightly proud, allow to dry fully, then sand smooth\n\n### Common Questions This Guide Answers\n1. Does it need mixing or water added before use? → No — it is a single-component paste, ready to use directly from the container\n2. Is it classified as Dangerous Goods for transport or delivery? → No — despite a hazardous Skin Sensitisation Category 1 classification, it is NOT classified as Dangerous Goods under Australian transport regulations\n3. What PPE is required when using this product? → Safety shoes, overalls, nitrile rubber gloves (not latex or vinyl), and safety glasses — as specified in SDS reference SELGHSEN000276, Version 4.0, issued 28 August 2021\n\n---\n\n## Product Overview\n\nSelleys No More Cracks RTU Cracks & Dents is a paste filler for small cracks and dents in interior surfaces. Made by Selleys, a division of DuluxGroup Australia Pty Ltd, it goes straight from the container to the surface — no mixing, no preparation. Whether you're a seasoned tradesperson or tackling your first repair job, it's a straightforward product that does what it says.\n\nThe product carries a hazardous classification under Australian safety standards (Skin Sensitisation Category 1, Signal Word: Warning), but is NOT classified as Dangerous Goods for transport purposes. That distinction matters practically: standard shipping and storage apply, without the logistical restrictions that come with Dangerous Goods — though you still need the right PPE on the job.\n\nThe paste is tan coloured with a mild characteristic odour. Four sizes are available — 350g, 520g, 750g, and 1.6kg — so you can match the quantity to the job, whether it's a quick touch-up or an extensive surface preparation project.\n\n---\n\n## Available Sizes and Choosing the Right One\n\nSelleys No More Cracks RTU Cracks & Dents comes in four sizes:\n\n- **350g** — for small, isolated repairs: a single crack or a handful of dents\n- **520g** — a better fit for slightly larger repair areas or multiple small defects\n- **750g** — handles moderate repair tasks across a room or across multiple surfaces\n- **1.6kg** — for extensive repairs or ongoing maintenance work\n\nBecause the formula is ready-to-use, there's no waste from over-mixing. Match the size to the scope of your repair. For larger projects or regular maintenance, the 1.6kg container delivers better value per gram and keeps you stocked for the next job without another trip to the store.\n\n---\n\n## How the Ready-to-Use Formula Works\n\nThe \"RTU\" (Ready-To-Use) designation means something specific here. This is not a two-part filler or a powdered compound that needs water and mixing. The paste is in working condition when you open it — apply directly to the surface. No extra tools, no liquids, no preparation steps.\n\nHere's why that matters on the job:\n\n- **Consistency:** Pre-mixed paste delivers the same uniform texture and performance every time. No variability from incorrect mixing ratios.\n- **Speed:** There's no waiting for a compound to reach workable consistency. Work starts the moment the container opens.\n- **Reduced waste:** Use what you need, reseal the container, and the rest stays ready for next time.\n\nThe paste presses cleanly into cracks and dents, filling voids and bonding firmly to the surrounding surface for a result that holds.\n\n---\n\n## Practical Applications\n\nSelleys No More Cracks RTU Cracks & Dents is designed for small cracks and dents — the product name makes the scope clear. It's a precision repair solution, not a structural filler, and it's not intended for large gaps or deep voids. The right applications are:\n\n- Hairline cracks in plaster or plasterboard walls\n- Small dents or surface imperfections in interior walls and ceilings\n- Minor surface defects in cornices or architraves before painting\n- Surface preparation ahead of repainting, where you need a smooth, even finish\n\nKnowing the intended scope sets you up for success. For defects beyond what this product is designed to address, a different filler or repair method is the right call.\n\n---\n\n## Application Guidance\n\nThe ready-to-use formula keeps the process straightforward. Follow the right technique and you'll get professional results.\n\n### Surface preparation\n\nBefore applying the filler:\n\n1. The surface must be clean, dry, and free from loose material, dust, or grease.\n2. For cracks, use a scraper or filling knife to clear any loose plaster or paint from the crack edges.\n3. For very fine cracks, widening slightly helps the filler achieve stronger adhesion and deeper penetration.\n\n### Applying the filler\n\n1. Use a filling knife, putty knife, or similar flat-bladed tool to scoop a measured amount of paste from the container.\n2. Press the paste firmly into the crack or dent, working it into the void to push out air pockets.\n3. Draw the blade across the surface, leaving the filler sitting slightly proud — raised above the surrounding surface — to account for minor shrinkage as the product dries.\n4. Reseal the container immediately after use.\n\n### Drying and finishing\n\nAllow the filler to dry fully before sanding or painting. Drying time varies with repair depth, ambient temperature, and humidity. Shallower repairs dry faster; deeper fills need more time. Once dry, sand smooth with fine-grit sandpaper until flush with the surrounding surface, then prime and paint.\n\n---\n\n## Safety Considerations and PPE Requirements\n\nSelleys No More Cracks RTU Cracks & Dents carries a hazardous classification under Australian workplace health and safety regulations — specifically Skin Sensitisation Category 1 with a Signal Word of Warning. This means the product contains ingredients that can cause an allergic skin reaction with repeated or prolonged exposure.\n\nUsed carefully with the right PPE, it's safe to work with. The required PPE as specified in the product's Safety Data Sheet (SDS) is:\n\n| PPE Item | Purpose |\n|---|---|\n| Safety shoes | Protect feet from spills or dropped containers |\n| Overalls | Prevent skin contact with the paste during application |\n| Nitrile rubber gloves | Protect hands — the primary point of skin contact during use |\n| Safety glasses | Prevent eye contact, particularly when sanding dried filler |\n\nNitrile rubber gloves are specified — not latex, not vinyl — because nitrile provides better chemical resistance for this product's formulation.\n\n### First aid awareness\n\nThe SDS contains full first aid instructions. Key points:\n\n- **Skin contact:** Wash thoroughly with soap and water. Remove contaminated clothing.\n- **Eye contact:** Rinse immediately with clean water for several minutes and seek medical advice if irritation persists.\n- **Inhalation:** Move to fresh air if dust is generated during sanding of dried filler.\n\n### Transport and storage classification\n\nDespite its hazardous classification for health purposes, this product is NOT classified as Dangerous Goods for transport under Australian regulations. It can be transported, purchased online, and delivered without the special handling requirements that apply to flammable or corrosive Dangerous Goods. Store in a cool, dry location away from direct sunlight, and keep the container sealed between uses.\n\n---\n\n## Expert Tips and Best Practices\n\nThese are the practices that separate a good repair from a great one.\n\n**Build up deeper repairs in layers.** For cracks or dents that need a significant volume of filler, apply in multiple thin coats rather than one thick fill. Let each layer dry fully before applying the next. This prevents cracking or shrinkage in the finished repair.\n\n**Always leave the filler slightly proud.** Applying the paste raised above the surrounding surface is standard practice. Most fillers shrink marginally as they dry, so sanding flush after drying gives a cleaner, more accurate result than trying to apply it perfectly level — which almost always leaves a slight depression.\n\n**Work through the grits.** Start with medium-grit sandpaper (around 120 grit) to knock back the bulk of the dried filler, then move to fine-grit (180–240 grit) for a surface smooth enough to accept paint evenly. Rushing this step shows in the finished result.\n\n**Prime before you paint.** On previously painted surfaces, a coat of primer over the repaired area before repainting ensures the topcoat adheres evenly and the repair doesn't show through as a different texture or sheen.\n\n**Seal the container every time.** This is a water-based paste. Air exposure causes the surface to skin over and eventually dries the product out. Press the lid firmly closed after every use.\n\n---\n\n## Storage and Product Care\n\nStore the product correctly and it stays ready whenever the next repair comes up:\n\n- Store in a cool, dry location away from direct sunlight and heat sources\n- Keep the container tightly sealed between uses — air exposure will cause the paste to skin over or dry out\n- Do not allow the product to freeze, as this alters the paste's consistency and performance\n- Keep out of reach of children\n\nIf the paste has formed a skin on the surface after storage, carefully remove that layer before use. If the paste has dried throughout, the product is no longer usable — proper sealing after every use is what prevents this.\n\n---\n\n## References\n\n- [Selleys No More Cracks Product Range – Selleys Australia](https://www.selleys.com.au/fillers/no-more-cracks/)\n- [Selleys No More Cracks RTU Cracks & Dents Safety Data Sheet (SDS) – DuluxGroup / Selleys, Reference No. SELGHSEN000276, Version 4.0, Issued 28 August 2021](https://www.selleys.com.au/) *(Based on manufacturer SDS documentation provided)*\n- [Globally Harmonised System of Classification and Labelling of Chemicals (GHS) – Safe Work Australia](https://www.safeworkaustralia.gov.au/chemicals/globally-harmonised-system-ghs)\n- [Australian Code for the Transport of Dangerous Goods by Road and Rail (ADG Code) – Department of Infrastructure, Transport, Regional Development, Communications and the Arts](https://www.infrastructure.gov.au/transport/dangerous-goods/australian-code-transport-dangerous-goods-road-and-rail-adg-code)\n\n---\n\n## Frequently Asked Questions\n\nWhat is Selleys No More Cracks RTU Cracks & Dents: A ready-to-use paste filler for interior surfaces\n\nWho manufactures Selleys No More Cracks RTU: Selleys, a division of DuluxGroup Australia Pty Ltd\n\nDoes it require mixing before use: No, it is ready to use straight from the container\n\nDoes it require water to be added: No\n\nIs it a two-part filler: No, it is a single-component paste\n\nWhat colour is the paste: Tan\n\nDoes it have an odour: Yes, a mild characteristic odour\n\nWhat sizes is it available in: 350g, 520g, 750g, and 1.6kg\n\nWhat is the smallest available size: 350g\n\nWhat is the largest available size: 1.6kg\n\nWhich size suits a single small crack: 350g\n\nWhich size suits multiple small repairs: 520g\n\nWhich size suits moderate repairs across a room: 750g\n\nWhich size suits extensive or ongoing repairs: 1.6kg\n\nDoes a larger container offer better value per gram: Yes, the 1.6kg size delivers better value per gram\n\nIs it suitable for interior surfaces: Yes\n\nIs it suitable for exterior surfaces: No, it is engineered for interior use only\n\nIs it suitable for structural repairs: No, it is a precision repair solution only\n\nIs it suitable for large gaps or deep voids: No\n\nIs it suitable for hairline cracks in plaster: Yes\n\nIs it suitable for plasterboard walls: Yes\n\nIs it suitable for small dents in interior walls: Yes\n\nIs it suitable for ceilings: Yes\n\nIs it suitable for cornices before painting: Yes\n\nIs it suitable for architraves before painting: Yes\n\nDoes it need surface preparation before application: Yes\n\nMust the surface be clean before applying: Yes\n\nMust the surface be dry before applying: Yes\n\nMust loose material be removed before applying: Yes\n\nShould fine cracks be widened before filling: Yes, to improve adhesion and penetration\n\nWhat tool is used to apply the filler: A filling knife, putty knife, or flat-bladed tool\n\nShould the filler be pressed firmly into the crack: Yes, to push out air pockets\n\nShould the filler be applied flush with the surface: No, it should be left slightly proud\n\nWhy leave the filler slightly proud: To account for minor shrinkage during drying\n\nShould the container be resealed after use: Yes, immediately after each use\n\nWhy must the container be resealed: Air exposure causes the paste to skin over or dry out\n\nCan deeper repairs be done in one thick application: No, apply in multiple thin layers\n\nWhy apply deeper repairs in layers: To prevent cracking or shrinkage in the finished repair\n\nMust each layer dry fully before the next is applied: Yes\n\nWhat grit sandpaper should be used first when sanding: Medium-grit, around 120 grit\n\nWhat grit sandpaper is used for final smoothing: Fine-grit, 180–240 grit\n\nShould the repair be primed before painting: Yes\n\nWhy prime before painting: To ensure even topcoat adhesion and consistent finish\n\nIs the product classified as hazardous: Yes, under Australian workplace health and safety regulations\n\nWhat is the hazardous classification: Skin Sensitisation Category 1\n\nWhat is the signal word on the label: Warning\n\nWhat does Skin Sensitisation Category 1 mean: The product can cause allergic skin reactions with repeated or prolonged exposure\n\nIs it classified as Dangerous Goods for transport: No\n\nCan it be purchased online and delivered without special handling: Yes\n\nAre safety shoes required when using this product: Yes\n\nAre overalls required when using this product: Yes\n\nAre gloves required when using this product: Yes\n\nWhat type of gloves are specified: Nitrile rubber gloves\n\nAre latex gloves suitable as a substitute: No, nitrile is specified\n\nAre vinyl gloves suitable as a substitute: No, nitrile is specified\n\nWhy are nitrile gloves specified: Nitrile delivers superior chemical resistance for this formulation\n\nAre safety glasses required when using this product: Yes\n\nWhen are safety glasses particularly important: When sanding dried filler\n\nWhat should be done if the product contacts skin: Wash thoroughly with soap and water\n\nShould contaminated clothing be removed after skin contact: Yes\n\nWhat should be done if the product contacts eyes: Rinse immediately with clean water for several minutes\n\nWhen should medical advice be sought after eye contact: If irritation persists after rinsing\n\nWhat should be done if dust is inhaled during sanding: Move to fresh air\n\nWhere is the full first aid information found: In the product Safety Data Sheet (SDS)\n\nWhere should the product be stored: In a cool, dry location away from direct sunlight\n\nCan the product be stored in direct sunlight: No\n\nCan the product be allowed to freeze: No\n\nWhy must freezing be avoided: Freezing alters the paste's consistency and performance\n\nShould the product be kept away from children: Yes\n\nWhat happens if a skin forms on the paste after storage: Carefully remove that layer before use\n\nWhat does it mean if the paste has dried throughout the container: The product is no longer usable\n\nWhat is the SDS reference number for this product: SELGHSEN000276\n\nWhat version is the current SDS: Version 4.0\n\nWhen was the current SDS issued: 28 August 2021\n\nDoes drying time vary: Yes, based on repair depth, temperature, and humidity\n\nDo shallower repairs dry faster than deeper ones: Yes\n\nMust the filler be fully dry before sanding: Yes\n\nMust the filler be fully dry before painting: Yes\n\nIs the formula water-based: Yes\n\n---\n\n---\n\n## Label Facts Summary\n\n> **Disclaimer:** All facts and statements below are general product information, not professional advice. Consult relevant experts for specific guidance.\n\n### Verified Label Facts\n\n- **Product Name:** Selleys No More Cracks RTU Cracks & Dents\n- **Manufacturer:** Selleys, a division of DuluxGroup Australia Pty Ltd\n- **Product Type:** Ready-to-use (RTU) paste filler\n- **Form:** Single-component paste (no mixing required)\n- **Colour:** Tan\n- **Odour:** Mild characteristic odour\n- **Available Sizes:** 350g, 520g, 750g, 1.6kg\n- **Intended Surface Type:** Interior surfaces only\n- **Intended Application Scope:** Small cracks and dents; not suitable for large gaps, deep voids, or structural repairs\n- **Suitable Surfaces:** Plaster, plasterboard walls, ceilings, cornices, architraves\n- **Formula Base:** Water-based\n- **Hazardous Classification:** Yes — Skin Sensitisation Category 1 (Australian WHS regulations)\n- **Signal Word:** Warning\n- **Dangerous Goods Classification (Transport):** NOT classified as Dangerous Goods under Australian regulations\n- **Required PPE — Gloves:** Nitrile rubber gloves (latex and vinyl not specified)\n- **Required PPE — Eye Protection:** Safety glasses\n- **Required PPE — Body Protection:** Overalls\n- **Required PPE — Foot Protection:** Safety shoes\n- **First Aid — Skin Contact:** Wash thoroughly with soap and water; remove contaminated clothing\n- **First Aid — Eye Contact:** Rinse immediately with clean water for several minutes; seek medical advice if irritation persists\n- **First Aid — Inhalation:** Move to fresh air if dust is generated during sanding of dried filler\n- **Full First Aid Reference:** Product Safety Data Sheet (SDS)\n- **SDS Reference Number:** SELGHSEN000276\n- **SDS Version:** 4.0\n- **SDS Issue Date:** 28 August 2021\n- **Storage Requirements:** Cool, dry location; away from direct sunlight and heat sources; container tightly sealed; do not freeze; keep out of reach of children\n- **Freezing:** Must not be allowed to freeze — alters paste consistency and performance\n- **Drying Time Variables:** Repair depth, ambient temperature, and humidity\n- **Application Tool:** Filling knife, putty knife, or flat-bladed tool\n- **Application Method:** Press firmly into void; leave slightly proud of surrounding surface to account for shrinkage\n- **Resealing Requirement:** Container must be resealed immediately after each use\n- **Surface Preparation Requirements:** Surface must be clean, dry, and free from loose material, dust, and grease before application\n\n### General Product Claims\n\n- Delivers professional results on small cracks and dents\n- No mixing, no preparation required\n- Pre-mixed paste delivers consistent, uniform texture and performance every time\n- No variability from incorrect mixing ratios\n- Work starts the moment the container opens\n- Paste bonds firmly to surrounding surface material for a result that holds\n- 1.6kg size delivers better value per gram for larger or ongoing projects\n- Applying filler slightly proud and sanding flush after drying gives a cleaner, more accurate result than aiming for level on application\n- Priming before repainting ensures even topcoat adhesion and prevents the repair from showing through as a different texture or sheen\n- Applying deeper repairs in multiple thin layers eliminates risk of cracking or shrinkage in the finished repair\n- Nitrile rubber gloves deliver superior chemical resistance suited to this product's formulation",
  "geography": {},
  "metadata": {},
  "publishedAt": "",
  "workspaceId": "77ac21fe-85f0-45c0-8279-2da0c52dc749",
  "_links": {
    "canonical": "https://directory.selleys.com.au/web-crawled-products/selleys-no-more-cracks-small-cracks-dents-13/"
  },
  "productInfo": {
    "stock": true
  },
  "productFeedItemId": "05f2c832-1f2c-43d2-810e-28d45dfd547c"
}