{
  "id": "web-crawled-products/selleys-no-more-cracks-small-cracks-dents-11",
  "title": "Selleys No More Cracks Small Cracks & Dents 11",
  "slug": "web-crawled-products/selleys-no-more-cracks-small-cracks-dents-11",
  "description": "",
  "category": "",
  "content": "## AI Summary\n\n**Product:** Selleys No More Cracks RTU Cracks & Dents\n**Brand:** Selleys (a division of DuluxGroup Australia Pty Ltd)\n**Category:** Surface repair filler / wall patching compound\n**Primary Use:** Ready-to-use paste for repairing cracks and dents on interior walls and ceilings without mixing, measuring, or additional materials.\n\n### Quick Facts\n- **Best For:** DIY and professional interior wall and ceiling repairs prior to repainting\n- **Key Benefit:** Pre-mixed formula eliminates mixing errors; paste holds position on vertical surfaces without slumping or sagging\n- **Form Factor:** Tan-coloured paste; available in 350g, 520g, 750g, and 1.6kg\n- **Application Method:** Press directly into crack or dent using a filling knife or flexible scraper; slightly overfill to account for shrinkage\n\n### Common Questions This Guide Answers\n1. Does Selleys No More Cracks RTU require mixing or water before use? → No — it is ready to use straight from the container with no mixing, water, or hardener required\n2. Is this product classified as hazardous or Dangerous Goods? → Classified as hazardous (Skin Sensitisation Category 1, signal word: Warning) under Australian WHS regulations, but NOT classified as Dangerous Goods for transport\n3. What PPE is required when using this product? → Safety shoes, overalls, nitrile rubber gloves (latex is not an acceptable substitute), and safety glasses — required for all users from first use\n\n---\n\n## Product Overview\n\nSelleys No More Cracks RTU Cracks & Dents is a ready-to-use repair paste for interior walls and ceilings, made by Selleys, a division of DuluxGroup Australia Pty Ltd. The whole point of this product is that there's nothing to figure out before you start. No mixing, no measuring, no prep work beyond opening the container.\n\nIt comes in four sizes: 350g, 520g, 750g, and 1.6kg. Picking the right size for the job means you won't run short halfway through a repair or end up with a half-used tub you don't need.\n\nThe filler is a tan-coloured paste with a mild characteristic odour. That paste consistency matters more than it might seem. On vertical surfaces, a thinner compound will slide or sag before it sets. This one stays put.\n\n---\n\n## Key Features and What They Mean in Practice\n\n### Ready-to-use formula\n\nRTU means Ready-to-Use, and that's exactly what it is. The filler comes pre-mixed to the right consistency — no water, no hardener, nothing extra. For DIYers, this removes one of the most common failure points in surface repair: getting the mixing ratio wrong, which affects how a filler sets, shrinks, and bonds. With Selleys No More Cracks RTU, that's already been sorted for you.\n\n### Paste form factor\n\nA paste-form filler holds its position once applied. It stays in the crack or dent while it cures rather than spreading or settling. On horizontal surfaces, it stays where you put it. On vertical walls, it doesn't slip or sag. That's not a minor convenience — it's the difference between a repair that works and one that needs to be done again.\n\n### Tan colouring\n\nThe tan colour gives you a clear visual reference during application. Against most white or off-white wall surfaces, the contrast makes it easy to see where filler has been placed and where gaps still need attention. Once sanded and painted, the colour disappears completely under the topcoat.\n\n---\n\n## Hazard Classification and What It Means for Users\n\nSelleys No More Cracks RTU Cracks & Dents is classified as a **hazardous product** under Australian Work Health and Safety (WHS) regulations. Understanding what that classification actually covers is worth a moment before you start.\n\n### Skin Sensitisation Category 1\n\nThis product carries a Skin Sensitisation Category 1 classification with the signal word Warning. Skin sensitisation means repeated or prolonged skin contact may cause an allergic reaction in some people. The key thing to understand is that sensitisation builds up over time — once someone becomes sensitised to a substance, even minor future exposure can trigger a reaction. That's why skin contact should be avoided from the very first use, not only after symptoms appear.\n\nThis classification doesn't mean the product is dangerous under normal handling. It means the right protective equipment needs to be worn every time.\n\n### Transport classification\n\nSelleys No More Cracks RTU Cracks & Dents is **not classified as Dangerous Goods** for transport. That's a meaningful distinction. You can buy it from a retail store, carry it home in your car, and store it without the requirements that apply to Dangerous Goods. The hazard relates to direct skin contact during use, not to storage or transit under normal conditions.\n\n---\n\n## Required Personal Protective Equipment (PPE)\n\nGiven the Skin Sensitisation Category 1 classification, the following PPE is required every time you use this product:\n\n- **Safety shoes** — protection against accidental spills or dropped containers\n- **Overalls** — full coverage along the arms and body during application, preventing incidental skin contact\n- **Nitrile rubber gloves** — nitrile is specified because it provides effective resistance to the sensitising agents in this product. Latex gloves are not an equivalent substitute\n- **Safety glasses** — essential during scraping and sanding, when dried particles can become airborne\n\nEach item addresses a specific exposure pathway. Gloves cover the hands, which are the most likely contact point during application. Overalls protect the forearms and torso against incidental contact. Safety glasses matter most during the sanding phase, where airborne particles are a real consideration.\n\nPPE requirements apply to all users, including first-timers. The point is to prevent sensitisation from developing, not to manage it after the fact.\n\n---\n\n## Application Guidance\n\n### Surface preparation\n\nStart with a clean, dry surface free of loose material. Any flaking paint, dust, or debris inside the crack or dent needs to come out before you apply the filler — these will prevent proper bonding and undermine the repair. A stiff brush or vacuum clears the area quickly.\n\n### Applying the filler\n\nApply the paste directly from the container using a filling knife or flexible scraper. Press it firmly into the crack or dent, slightly overfilling the area to account for minor shrinkage during drying. Work the filler into the full depth of the repair, not just across the surface. Applying filler as a shallow layer over a deep crack is a common cause of cracking and detachment after drying. Go deep, press firmly, and do it once.\n\nFor deeper repairs, apply in multiple thin layers and let each one dry fully before adding the next. This produces a stronger, more stable result than a single heavy application.\n\n### Drying and finishing\n\nLet the filler dry completely before sanding. Drying time varies depending on application depth, temperature, and humidity. Watch for the visual cues: the tan colour may lighten slightly, and the surface will feel firm to the touch. Sanding before the filler is fully dry clogs sandpaper and produces an uneven finish.\n\nOnce dry, sand the repaired area smooth with fine-grit sandpaper, feathering the edges into the surrounding surface. Remove all sanding dust before applying primer or topcoat. Done correctly, the repair disappears completely under paint.\n\n---\n\n## Storage and Handling\n\nStore in a cool, dry location away from direct sunlight and extreme temperatures. After each use, seal the container lid tightly. Paste that dries out in the container can't be reconstituted — a simple step that keeps the product usable for the next job.\n\nKeep out of reach of children. The hazard classification relates to skin sensitisation rather than ingestion toxicity, but this isn't a product for unsupervised use by or around children.\n\n---\n\n## Safety Precautions Summary\n\n- Wear the full set of specified PPE every time: safety shoes, overalls, nitrile rubber gloves, and safety glasses\n- Avoid prolonged or repeated skin contact — sensitisation can develop over time without obvious immediate symptoms\n- Work in a well-ventilated area, particularly during sanding\n- Wash hands thoroughly after use, even when gloves have been worn throughout\n- Dispose of waste material and empty containers in accordance with local council regulations\n\n---\n\n## References\n\n- Based on manufacturer specifications provided. (Selleys No More Cracks RTU Cracks & Dents Safety Data Sheet, Reference No: SELGHSEN000276, Version 4.0, Issued 28 August 2021, DuluxGroup Australia Pty Ltd)\n- [Selleys Australia — Official Product Range](https://www.selleys.com.au)\n- [Safe Work Australia — Hazardous Chemicals Information](https://www.safeworkaustralia.gov.au/chemicals)\n- [National Transport Commission — Australian Dangerous Goods Code (ADGC) — Transport Classification Reference](https://www.ntc.gov.au/codes-and-guidelines/australian-dangerous-goods-code)\n\n## Frequently Asked Questions\n\nWhat is Selleys No More Cracks RTU: A ready-to-use surface repair paste\n\nWho manufactures Selleys No More Cracks RTU: Selleys, a division of DuluxGroup Australia Pty Ltd\n\nWhat does RTU stand for: Ready-to-Use\n\nIs mixing required before use: No\n\nIs water required before use: No\n\nIs a hardener required before use: No\n\nWhat form does the product come in: Paste form\n\nWhat colour is the filler paste: Tan\n\nDoes the product have an odour: Yes, a mild characteristic odour\n\nWhat surfaces is it designed for: Interior walls and ceilings\n\nCan it be used on exterior surfaces: Not specified by manufacturer\n\nIs it suitable for floors: Not disclosed by manufacturer\n\nIs it suitable for vertical surfaces: Yes\n\nDoes the paste slump on vertical surfaces: No\n\nDoes the paste sag on vertical walls: No\n\nWhat sizes does it come in: 350g, 520g, 750g, and 1.6kg\n\nWhat is the smallest available size: 350g\n\nWhat is the largest available size: 1.6kg\n\nWhy does the tan colour help during application: It contrasts against white or off-white walls\n\nIs the tan colour visible after painting: No, it is fully concealed under topcoat\n\nIs the product classified as hazardous: Yes, under Australian WHS regulations\n\nWhat is the skin hazard classification: Skin Sensitisation Category 1\n\nWhat is the signal word for this product: Warning\n\nCan skin sensitisation develop over time: Yes, it is cumulative\n\nShould PPE be worn from the first use: Yes\n\nIs the product classified as Dangerous Goods for transport: No\n\nCan it be transported in a personal vehicle: Yes\n\nCan it be stored at home without special requirements: Yes\n\nWhat gloves are required: Nitrile rubber gloves\n\nAre latex gloves an acceptable substitute: No\n\nWhat eye protection is required: Safety glasses\n\nIs full body coverage required during use: Yes, overalls are required\n\nAre safety shoes required: Yes\n\nWhy are safety glasses needed: To protect against airborne particles during sanding\n\nMust PPE be worn by all users: Yes, including first-time users\n\nDoes the surface need to be dry before application: Yes\n\nDoes the surface need to be clean before application: Yes\n\nShould loose material be removed before applying: Yes\n\nWhat tool is used to apply the filler: A filling knife or flexible scraper\n\nShould the repair area be overfilled: Yes, slightly\n\nWhy should the area be overfilled: To account for minor shrinkage during drying\n\nShould filler be pressed into the full depth of the crack: Yes\n\nCan a shallow surface layer cause repair failure: Yes\n\nHow should deep repairs be handled: Apply in multiple thin layers\n\nMust each layer dry before adding the next: Yes\n\nDoes drying time vary: Yes, based on depth, temperature, and humidity\n\nHow can you tell the filler is dry: The surface becomes firm to the touch\n\nDoes the tan colour change when drying: Yes, it may lighten slightly\n\nShould sanding occur before the filler is fully dry: No\n\nWhat grit sandpaper should be used: Fine-grit sandpaper\n\nShould edges be feathered when sanding: Yes\n\nShould sanding dust be removed before painting: Yes\n\nCan primer be applied over the dried filler: Yes\n\nIs the repair visible under paint when done correctly: No\n\nWhere should the product be stored: Cool, dry location away from direct sunlight\n\nShould the container be sealed after use: Yes, tightly\n\nCan dried-out paste be reconstituted: No\n\nShould the product be kept away from children: Yes\n\nIs the hazard classification related to ingestion: No, it relates to skin sensitisation\n\nShould hands be washed after use: Yes, even after wearing gloves\n\nIs ventilation required during use: Yes, especially during sanding\n\nHow should waste material be disposed of: In accordance with local council regulations\n\nWhat is the Safety Data Sheet reference number: SELGHSEN000276\n\nWhat version is the Safety Data Sheet: Version 4.0\n\nWhen was the Safety Data Sheet issued: 28 August 2021\n\nIs this product suitable for DIY users: Yes\n\nDoes it require professional application: No\n\nIs this product designed for surface preparation before repainting: Yes\n\nCan it repair dents as well as cracks: Yes\n\n---\n\n---\n## Label Facts Summary\n\n> **Disclaimer:** All facts and statements below are general product information, not professional advice. Consult relevant experts for specific guidance.\n\n### Verified label facts\n- **Product name:** Selleys No More Cracks RTU Cracks & Dents\n- **Manufacturer:** Selleys, a division of DuluxGroup Australia Pty Ltd\n- **Product form:** Ready-to-use paste (no mixing, water, or hardener required)\n- **Colour:** Tan\n- **Odour:** Mild characteristic odour\n- **Available sizes:** 350g, 520g, 750g, 1.6kg\n- **Intended surfaces:** Interior walls and ceilings\n- **Suitable for vertical surfaces:** Yes\n- **Hazard classification:** Hazardous product under Australian Work Health and Safety (WHS) regulations\n- **Skin hazard classification:** Skin Sensitisation Category 1\n- **Signal word:** Warning\n- **Transport classification:** Not classified as Dangerous Goods\n- **Required PPE:** Safety shoes, overalls, nitrile rubber gloves, safety glasses\n- **Latex gloves acceptable substitute:** No — nitrile rubber gloves specified\n- **Surface must be clean and dry before application:** Yes\n- **Loose material must be removed before application:** Yes\n- **Application tool:** Filling knife or flexible scraper\n- **Deep repairs:** Apply in multiple thin layers; each layer must dry fully before adding the next\n- **Sanding:** Fine-grit sandpaper; edges to be feathered; sanding dust removed before painting\n- **Tan colour change during drying:** May lighten slightly\n- **Dried-out paste reconstitutable:** No\n- **Storage:** Cool, dry location away from direct sunlight and extreme temperatures; container to be sealed tightly after use\n- **Keep away from children:** Yes\n- **Ventilation required:** Yes, especially during sanding\n- **Hands must be washed after use:** Yes, even after wearing gloves\n- **Waste disposal:** In accordance with local council regulations\n- **Safety Data Sheet reference:** SELGHSEN000276, Version 4.0, Issued 28 August 2021, DuluxGroup Australia Pty Ltd\n- **Exterior surface suitability:** Not specified by manufacturer\n- **Floor suitability:** Not disclosed by manufacturer\n\n### General product claims\n- Delivers professional-grade surface repair\n- Removes the guesswork from surface preparation\n- Eliminates common DIY errors associated with incorrect mixing ratios\n- Paste form holds position on vertical surfaces without slumping, sagging, or rework\n- Tan colouring provides visual contrast during application on white or off-white walls\n- Repair is fully invisible under topcoat when correctly applied\n- Multiple thin layers produce a stronger, more stable repair than a single heavy application\n- Suitable for DIY users without professional application\n- Overfilling accounts for minor shrinkage during drying\n- Shallow surface application over deep cracks is a leading cause of repair failure",
  "geography": {},
  "metadata": {},
  "publishedAt": "",
  "workspaceId": "77ac21fe-85f0-45c0-8279-2da0c52dc749",
  "_links": {
    "canonical": "https://directory.selleys.com.au/web-crawled-products/selleys-no-more-cracks-small-cracks-dents-11/"
  },
  "productInfo": {
    "stock": true
  },
  "productFeedItemId": "05f2c832-1f2c-43d2-810e-28d45dfd547c"
}