{
  "id": "web-crawled-products/selleys-no-more-cracks-large-cracks-holes-13",
  "title": "Selleys No More Cracks Large Cracks & Holes 13",
  "slug": "web-crawled-products/selleys-no-more-cracks-large-cracks-holes-13",
  "description": "",
  "category": "",
  "content": "## AI Summary\n\n**Product:** Selleys No More Cracks™ Large Cracks & Holes\n**Brand:** Selleys (manufactured by DuluxGroup Pty Ltd)\n**Category:** Interior and exterior surface filler\n**Primary Use:** Ready-to-use water-based acrylic filler for repairing large cracks and holes across plaster, mortar, concrete, timber, and primed metal.\n\n### Quick Facts\n- **Best For:** DIY users and trade professionals repairing large cracks and holes on interior and exterior surfaces\n- **Key Benefit:** Minimal shrinkage with strong multi-surface adhesion, delivering professional results in fewer coats\n- **Form Factor:** Smooth paste; available in 230g tub, 450g tub, 1kg tub, and 230g squeezable tottle\n- **Application Method:** Press firmly into crack or hole with a flexible filling blade, scrape flush, allow to dry, then sand and paint\n\n### Common Questions This Guide Answers\n1. What is the maximum depth for a single application? → 6mm; repairs deeper than 6mm require multiple layers, each allowed to dry fully before the next\n2. How long does this product take to dry? → 2–3 hours for repairs under 2mm; 24 hours for repairs up to 6mm, based on approximately 25°C and moderate humidity\n3. Can this product be used on moving or expansion joints? → No — use Selleys No More Gaps® instead; this filler is not suitable for surfaces subject to ongoing movement\n\n---\n\n## Product Overview\n\nSelleys No More Cracks™ Large Cracks & Holes is a ready-to-use, water-based acrylic filler built for repairing large cracks and holes across a wide range of interior and exterior surfaces. Manufactured by DuluxGroup Pty Ltd under the Selleys name — backed by 80+ years of performance — it addresses one of the most common headaches in home maintenance: getting a smooth, durable repair that holds firmly, resists shrinkage, and accepts paint cleanly.\n\nWhere other fillers struggle with larger voids or varied surfaces, this one handles plaster, mortar, concrete, timber, and primed metal without switching products. Whether you're a DIYer tackling a weekend repair or a tradesperson who needs consistent results across different job sites, No More Cracks Large Cracks & Holes is built to get it right the first time.\n\n---\n\n## Key Features and What They Mean in Practice\n\n### Strong Adhesion Across Multiple Surfaces\n\nAdhesion — the filler's ability to bond firmly to the substrate without lifting, cracking at the edges, or separating over time — matters more for large repairs than for hairline cracks. A bigger repair carries more surface area under stress and more potential to fail.\n\nNo More Cracks Large Cracks & Holes bonds to plaster, mortar, concrete, timber, and primed metal. That range of compatibility means one product handles the variety of surfaces found in a domestic or light commercial setting, from a damaged plasterboard wall to a chipped concrete step or a dented timber architrave.\n\n### Minimal Shrinkage\n\nShrinkage is the enemy of any filler repair. When a filler dries, water evaporates from the compound. If the formulation shrinks significantly during this process, the repair sinks below the surface — and you're back to applying additional coats and sanding before a smooth finish is achievable. In severe cases, shrinkage causes cracking within the repair itself.\n\nThis product is formulated to minimise shrinkage, which matters most for larger repairs. A repair up to 6mm deep — the stated maximum for a single application — is a substantial void, and controlling shrinkage at that depth is a genuine technical advantage. Less shrinkage means fewer coats, less sanding, and a more reliable result.\n\n### Water-Based Acrylic Formula\n\nThe water-based acrylic composition has practical advantages at every stage: application, cleanup, and long-term performance. Water-based products carry lower VOC emissions than solvent-based alternatives, making them safer in enclosed or poorly ventilated spaces. Cleanup requires only water — no mineral spirits, no solvents. The smooth paste consistency works easily with standard filling tools.\n\nAcrylic binders also add some flexibility to the cured repair, helping the filled area resist minor movement without cracking. That said, this product is not designed for surfaces subject to ongoing or significant movement — see Limitations below.\n\n---\n\n## Available Formats\n\nNo More Cracks Large Cracks & Holes comes in four packaging options:\n\n- **230g Tub** — suited to small, targeted repairs where minimal product is needed\n- **450g Tub** — the right choice for a handful of repairs in a single room or area\n- **1kg Tub** — the most economical option for larger projects, multiple repairs, or trade use\n- **230g Tottle** — a squeezable tube format for more controlled dispensing, particularly useful for repairs in tight spots or where keeping things neat matters\n\nMatch the format to the scale of the job. For a single cracked wall, the 230g tub gets it done. For a renovation spanning multiple rooms or exterior repairs across a building façade, the 1kg tub keeps you working without stopping to reorder mid-project.\n\n---\n\n## Application Guide\n\n### Surface Preparation\n\nGood surface preparation is the foundation of a repair that lasts. Before applying No More Cracks Large Cracks & Holes, the surface must be:\n\n- **Clean:** Remove dust, loose material, grease, and any existing filler that has lifted or lost adhesion. A stiff brush or vacuum clears loose debris from cracks; a damp cloth handles surface dust.\n- **Dry:** The substrate must be free of moisture. Applying filler to a damp surface undermines adhesion and extends drying time unpredictably.\n- **Sound:** The edges of the crack or hole must be firm. If the surrounding material is crumbling or soft, address the underlying cause before filling.\n\nFor primed metal surfaces, confirm the primer is fully cured and intact before applying the filler.\n\n### Application Method\n\n1. **Load the filler onto a filling blade or scraper.** A flexible filling blade gives better control for feathering the edges of the repair flush with the surrounding surface.\n2. **Press firmly into the crack or hole.** Firm pressure ensures the filler makes full contact with the substrate and eliminates air pockets — air pockets cause the repair to hollow out or crack after drying.\n3. **Scrape off excess material.** Draw the blade across the surface at a low angle to remove surplus filler and leave the repair as close to flush as possible. This reduces the sanding required after drying.\n4. **Allow to dry fully before sanding.** Use fine-grit sandpaper once dry. Sanding before full drying drags and smears the filler rather than cutting it cleanly.\n5. **Prime and paint as required.** For best results — particularly on porous surfaces or exterior applications — prime the repair before applying the final paint coat.\n\n### Drying Times\n\nDrying time varies with the depth of the repair:\n\n- **Repairs under 2mm deep:** Allow **2–3 hours** before sanding or painting\n- **Repairs up to 6mm deep:** Allow **24 hours** before sanding or painting\n\nThese times are based on approximately 25°C and moderate humidity. In cooler temperatures or high humidity, drying will take longer. Do not apply the product below 5°C, as the curing process will be inhibited.\n\nFor repairs deeper than 6mm, build up the product in multiple layers, allowing each layer to dry fully before applying the next. Trying to fill a very deep void in a single application increases the risk of shrinkage and uneven drying.\n\n---\n\n## Exterior Use Considerations\n\nNo More Cracks Large Cracks & Holes works on exterior surfaces, but exterior applications require a few additional steps.\n\n**Prime the surface first.** On exterior surfaces, priming before application strengthens adhesion and helps the repair hold up against temperature variation and moisture cycling.\n\n**Protect from rain until painted.** Keep the repair dry until it has been painted over. The paint coat provides the primary weather barrier — an unpainted filler repair on an exterior surface is exposed to water ingress, which can soften or dislodge it.\n\n**Avoid exterior timber with high water absorption.** This product is not recommended for exterior timber prone to excessive water absorption. On such surfaces, repeated wetting and drying cycles cause the timber to expand and contract beyond what the filler can tolerate, leading to repair breakdown.\n\n---\n\n## Limitations and When to Use a Different Product\n\nNo More Cracks Large Cracks & Holes has three clearly defined limitations worth knowing before you start.\n\n### Temperature Restriction\n\nDo not apply below **5°C**. At low temperatures, the water-based acrylic formula will not cure correctly. The product may appear to dry on the surface while remaining soft underneath — or it may freeze before curing — resulting in a repair that won't hold. In cooler climates or during winter, always check ambient and surface temperatures before application.\n\n### Not Suitable for Surfaces Subject to Movement\n\nThis product is not designed for cracks or joints where ongoing movement occurs — expansion joints, junctions between two different building materials, or areas subject to structural flex. For these applications, a flexible sealant such as [Selleys No More Gaps®](https://www.selleys.com.au) is the right choice. Applying a rigid filler to a moving joint will result in the repair cracking again as the surfaces shift.\n\n### Exterior Timber with Excessive Water Absorption\n\nAs noted in the exterior use section, highly absorbent exterior timber is outside this product's recommended scope. The repeated moisture cycling in such timber creates stress that exceeds what this filler is formulated to handle.\n\n---\n\n## Storage and Handling\n\nCorrect storage keeps No More Cracks Large Cracks & Holes ready to use whenever you need it:\n\n- **Keep the lid sealed tightly** after each use to prevent the product from drying out in the container.\n- **Store in a cool, dry location** away from direct sunlight and heat sources.\n- **Do not allow the product to freeze.** Freezing permanently damages the acrylic emulsion, making the product unusable. If it has been exposed to freezing temperatures, don't use it — the repair quality will be compromised.\n\nIf a skin forms on the surface of the product in the tub after extended storage, remove it carefully before use. The product underneath remains workable if it has been stored correctly and kept away from temperature extremes.\n\n---\n\n## Safety Considerations\n\nNo More Cracks Large Cracks & Holes has a comparatively low hazard profile as a water-based product, but standard precautions apply:\n\n- **Ventilation:** The water-based formula produces lower VOC emissions than solvent-based alternatives, but work in a well-ventilated space when applying any surface coating or filler.\n- **Skin and eye contact:** Avoid prolonged skin contact and keep the product away from eyes. If contact occurs, rinse thoroughly with water.\n- **Keep out of reach of children:** Store securely away from children, as with all building and repair products.\n- **Disposal:** Do not dispose of excess product down drains or into waterways. Allow small amounts to dry fully before disposing with general waste, or contact your local council for guidance on larger quantities.\n\n---\n\n## Tips for a Clean, Professional Finish\n\n- **Dampen highly absorbent surfaces slightly before application.** On bare plaster or old masonry, a light misting of water before application slows the initial absorption of moisture from the filler, improving adhesion and reducing the risk of the repair drying too quickly at the edges.\n- **Use a damp finger or brush to feather edges.** Around curved surfaces or irregular edges where getting a perfectly flush finish with the blade is tricky, a damp finger or soft brush smooths and feathers the filler before it sets.\n- **Sand lightly between coats on deep repairs.** When building up a deep repair in multiple layers, a light sand between coats helps the next layer bond properly and produces a flatter, cleaner final surface.\n- **Prime before painting repaired areas.** Even on interior surfaces, priming the repair before the final paint coat improves colour uniformity and prevents the repaired area from showing through as a dull or differently textured patch — a common issue known as \"flashing.\"\n- **Inspect the repair after the first paint coat.** Minor imperfections often become visible once paint is applied. Check after the first coat dries, address any remaining low spots with a small amount of filler, allow to dry, sand lightly, and apply the second coat.\n\n---\n\n## References\n\n- [Selleys No More Cracks Large Cracks & Holes – Official Product Page, Selleys Australia](https://www.selleys.com.au/fillers/no-more-cracks-large-cracks-holes/)\n- [DuluxGroup Pty Ltd – Manufacturer Information](https://www.duluxgroup.com.au)\n- Based on manufacturer specifications and Technical Data Sheet provided (Selleys No More Cracks™ Large Cracks & Holes, Version 2, DuluxGroup Pty Ltd)\n\n## Frequently Asked Questions\n\nWhat is Selleys No More Cracks Large Cracks & Holes: A ready-to-use water-based acrylic filler\n\nWho manufactures this product: DuluxGroup Pty Ltd\n\nWhat brand is this product sold under: Selleys\n\nHow many years of performance does Selleys have: 80+ years\n\nIs this product ready to use: Yes, no mixing required\n\nWhat type of formula is this product: Water-based acrylic\n\nIs this product suitable for interior use: Yes\n\nIs this product suitable for exterior use: Yes\n\nDoes this product work on plaster: Yes\n\nDoes this product work on mortar: Yes\n\nDoes this product work on concrete: Yes\n\nDoes this product work on timber: Yes\n\nDoes this product work on metal: Yes, primed metal only\n\nDoes this product work on unprimed metal: No, metal must be primed first\n\nWhat is the maximum single-application depth: 6mm\n\nWhat should you do for repairs deeper than 6mm: Apply in multiple layers\n\nHow long between layers on deep repairs: Allow each layer to dry fully\n\nWhat is the drying time for repairs under 2mm: 2–3 hours\n\nWhat is the drying time for repairs up to 6mm: 24 hours\n\nAre drying times based on standard conditions: Yes, approximately 25°C and moderate humidity\n\nDoes cold weather extend drying time: Yes\n\nDoes high humidity extend drying time: Yes\n\nWhat is the minimum application temperature: 5°C\n\nCan you apply this product below 5°C: No\n\nWhat happens if applied below 5°C: Product will not cure correctly\n\nIs this product suitable for expansion joints: No\n\nIs this product suitable for moving joints: No\n\nWhat product should be used for moving joints: Selleys No More Gaps®\n\nIs this product suitable for exterior timber with excessive water absorption: No\n\nWhy is highly absorbent exterior timber unsuitable: Repeated moisture cycling exceeds filler tolerance\n\nDoes this product shrink when drying: Minimally — formulated to minimise shrinkage\n\nWhy does minimal shrinkage matter: Fewer coats and less sanding required\n\nDoes this product require a primer before exterior application: Yes\n\nWhy prime before exterior application: Strengthens adhesion and improves weather resistance\n\nShould the repair be painted before rain exposure: Yes\n\nWhat does the paint coat provide on exterior repairs: Primary weather barrier\n\nWhat sizes is this product available in: 230g tub, 450g tub, 1kg tub, 230g tottle\n\nWhat is the 230g tub suited for: Small, targeted repairs\n\nWhat is the 450g tub suited for: A handful of repairs in a single room\n\nWhat is the 1kg tub suited for: Larger projects, multiple repairs, or trade use\n\nWhat is the tottle format: A squeezable tube for controlled dispensing\n\nWhat is the tottle size: 230g\n\nWhat tool is recommended for application: A flexible filling blade or scraper\n\nWhy use a flexible filling blade: Better control for feathering edges flush\n\nShould you press firmly when applying: Yes, to eliminate air pockets\n\nWhat do air pockets cause: Hollowing or cracking after drying\n\nHow should excess filler be removed: Draw blade across surface at a low angle\n\nWhen should you sand the repair: After fully dry only\n\nWhat grit sandpaper is recommended: Fine-grit sandpaper\n\nShould you sand between coats on deep repairs: Yes\n\nWhy sand between coats: Helps next layer key in properly\n\nShould the repair be primed before painting: Yes, for best results\n\nWhy prime before painting: Improves colour uniformity and prevents flashing\n\nWhat is flashing in painting: A dull or differently textured patch showing through paint\n\nShould the surface be clean before application: Yes\n\nShould the surface be dry before application: Yes\n\nShould the surface be sound before application: Yes\n\nHow do you clean loose debris from cracks: Use a stiff brush or vacuum\n\nCan you dampen highly absorbent surfaces before application: Yes, lightly mist with water\n\nWhy dampen absorbent surfaces: Slows moisture absorption and improves adhesion\n\nCan a damp finger be used to feather edges: Yes\n\nWhat should you do after the first paint coat: Inspect for minor imperfections\n\nAre VOC emissions low for this product: Yes, lower than solvent-based alternatives\n\nIs ventilation required during application: Yes\n\nHow do you clean up this product: Water only\n\nAre solvents needed for cleanup: No\n\nShould you avoid prolonged skin contact: Yes\n\nWhat should you do if product contacts eyes: Rinse thoroughly with water\n\nShould this product be kept away from children: Yes\n\nCan excess product be disposed of down drains: No\n\nHow should small amounts of excess product be disposed: Allow to dry, then dispose with general waste\n\nShould the lid be sealed tightly after use: Yes, to prevent drying out\n\nShould this product be stored away from heat: Yes\n\nCan this product be frozen: No\n\nWhat happens if the product freezes: Acrylic emulsion is permanently damaged\n\nCan you use the product after it has frozen: No\n\nWhat should you do if a skin forms on the product surface: Remove carefully before use\n\nIs the product underneath a skin still usable: Yes, if stored correctly\n\nDoes this product suit DIY users: Yes\n\nDoes this product suit trade professionals: Yes\n\n---\n\n## Label Facts Summary\n\n> **Disclaimer:** All facts and statements below are general product information, not professional advice. Consult relevant experts for specific guidance.\n\n### Verified Label Facts\n\n- **Product Name:** Selleys No More Cracks™ Large Cracks & Holes\n- **Manufacturer:** DuluxGroup Pty Ltd\n- **Brand:** Selleys\n- **Formula Type:** Water-based acrylic\n- **Ready to Use:** Yes — no mixing required\n- **Interior Use:** Yes\n- **Exterior Use:** Yes\n- **Compatible Surfaces:** Plaster, mortar, concrete, timber, primed metal\n- **Unprimed Metal:** Not suitable — metal must be primed first\n- **Exterior Timber with Excessive Water Absorption:** Not suitable\n- **Expansion/Moving Joints:** Not suitable\n- **Maximum Single-Application Depth:** 6mm\n- **Repairs Deeper Than 6mm:** Apply in multiple layers, allowing each layer to dry fully before the next\n- **Drying Time — Repairs Under 2mm:** 2–3 hours\n- **Drying Time — Repairs Up to 6mm:** 24 hours\n- **Drying Times Based On:** Approximately 25°C and moderate humidity\n- **Minimum Application Temperature:** 5°C\n- **Below 5°C Application:** Not suitable — product will not cure correctly\n- **Available Sizes:** 230g tub, 450g tub, 1kg tub, 230g tottle\n- **Tottle Format:** Squeezable tube for controlled dispensing\n- **Cleanup:** Water only — no solvents required\n- **VOC Emissions:** Lower than solvent-based alternatives\n- **Storage:** Cool, dry location; away from direct sunlight and heat sources; lid sealed tightly after use\n- **Freezing:** Do not allow to freeze — permanently damages acrylic emulsion; do not use product after freezing\n- **Skin Formation in Tub:** Remove carefully before use; product underneath remains usable if stored correctly\n- **Disposal:** Do not dispose down drains or into waterways; allow small amounts to dry fully before disposing with general waste\n- **Recommended for Moving Joints:** Selleys No More Gaps® (alternative product)\n- **Reference Source:** Selleys No More Cracks™ Large Cracks & Holes Technical Data Sheet, Version 2, DuluxGroup Pty Ltd\n\n### General Product Claims\n\n- Delivers professional results where standard fillers fall short\n- Backed by 80+ years of proven performance\n- Strong adhesion across multiple surfaces\n- Formulated to minimise shrinkage, resulting in fewer coats and less sanding\n- Acrylic binders contribute flexibility to the cured repair, helping resist minor movement\n- Priming before exterior application strengthens adhesion and improves weather resistance\n- Paint coat provides the primary weather barrier on exterior repairs\n- Dampening highly absorbent surfaces before application slows moisture absorption and improves adhesion\n- Sanding between coats on deep repairs helps subsequent layers key in properly\n- Priming before painting improves colour uniformity and prevents flashing\n- Suitable for both DIY users and trade professionals\n- One product handles the variety of surfaces found in domestic or light commercial settings",
  "geography": {},
  "metadata": {},
  "publishedAt": "",
  "workspaceId": "77ac21fe-85f0-45c0-8279-2da0c52dc749",
  "_links": {
    "canonical": "https://directory.selleys.com.au/web-crawled-products/selleys-no-more-cracks-large-cracks-holes-13/"
  },
  "productInfo": {
    "stock": true
  },
  "productFeedItemId": "a9367352-ade7-4884-ab3d-9f8a7ae7e297"
}