{
  "id": "web-crawled-products/selleys-no-more-cracks-large-cracks-holes-11",
  "title": "Selleys No More Cracks Large Cracks & Holes 11",
  "slug": "web-crawled-products/selleys-no-more-cracks-large-cracks-holes-11",
  "description": "",
  "category": "",
  "content": "## AI Summary\n\n**Product:** Selleys No More Cracks™ Large Cracks & Holes\n**Brand:** Selleys (manufactured by DuluxGroup Pty Ltd)\n**Category:** Surface filler / repair compound\n**Primary Use:** Ready-to-use water-based acrylic filler for repairing cracks and holes up to 6mm deep on interior and exterior surfaces.\n\n### Quick facts\n- **Best for:** Substantial surface repairs on plaster, mortar, concrete, timber, and primed metal in residential and renovation contexts\n- **Key benefit:** Repairs up to 6mm deep with superior adhesion and minimal shrinkage, outperforming standard fillers suited to only 1–2mm repairs\n- **Form factor:** Smooth ready-to-use paste; available in 230g Tottle, 230g Tub, 450g Tub, and 1kg Tub\n- **Application method:** Press into crack or hole with a filling blade or scraper; squeeze directly from Tottle for narrow cracks\n\n### Common questions this guide answers\n1. How deep can this filler repair in a single application? → Maximum 6mm per layer; deeper repairs require staged layers with 24 hours drying between each\n2. Can it be used outdoors? → Yes, but priming before application and painting over the repair are both mandatory; not suitable for exterior timber with high water absorption\n3. What is it not suitable for? → Movement cracks, structural repairs, unprimed metal, application below 5°C, and exterior timber prone to excessive water absorption — use Selleys No More Gaps® for moving cracks\n\n---\n\n## Product overview\n\nSelleys No More Cracks™ Large Cracks & Holes does what standard fillers can't: deliver reliable, lasting repairs on substantial surface damage. This ready-to-use, water-based acrylic filler is built for cracks and holes that need a serious solution. Manufactured by DuluxGroup Pty Ltd under the Selleys name, it bonds firmly with minimal shrinkage across a wide range of interior and exterior surfaces — plaster, mortar, concrete, timber, and primed metal.\n\nWhere ordinary fillers stop at hairline cracks and cosmetic touch-ups, No More Cracks Large Cracks & Holes handles repairs up to 6mm deep. That makes it the right choice for older homes, high-traffic areas, and surfaces that have taken a beating from the elements. It comes as a smooth, easy-to-work paste in 230g Tottle, 230g Tub, 450g Tub, and 1kg Tub formats, so whether you're patching a single hole or working through a full renovation, there's a size that fits.\n\n---\n\n## Key features and what they mean in practice\n\n### Water-based acrylic formula\n\nThe water-based acrylic formula is what gives this product its versatility and strength. Acrylic fillers bond firmly to a wide range of substrate materials without the brittleness that comes with plaster-based alternatives. The water-based composition keeps VOC levels low, so you can work safely in enclosed indoor spaces. Clean-up is straightforward too — tools and excess product wash off with water before the filler cures.\n\n### Superior adhesion with minimal shrinkage\n\nThese two qualities work together to produce a repair that lasts. Strong adhesion locks the filler to the surrounding surface so it stays bonded rather than pulling away at the edges as it dries. Minimal shrinkage keeps the filled area flush with the surrounding surface after curing, so you're not going back for a second application because the repair has sunken. For fills up to 6mm, this combination matters most — deeper repairs put more stress on the material during drying, and inferior products show it.\n\n### Multi-surface compatibility\n\nNo More Cracks Large Cracks & Holes works across a full range of surfaces:\n\n- **Plaster** — the most common interior wall and ceiling material in Australian homes\n- **Mortar** — for repairs to brick joints, rendered walls, and masonry\n- **Concrete** — including floors, paths, and structural surfaces\n- **Timber** — for filling splits, knots, and nail holes in wooden surfaces\n- **Primed metal** — suitable for metal surfaces that have been primed beforehand\n\nThat broad compatibility means one product handles most repair scenarios you'll face during a renovation or maintenance project, without needing a shelf full of specialised fillers.\n\n---\n\n## Technical specifications explained\n\n### Dry time: what the numbers mean\n\nNo More Cracks Large Cracks & Holes has two dry time specifications, each matched to the depth of the repair:\n\n- **Repairs under 2mm:** dry in approximately 2–3 hours\n- **Repairs up to 6mm:** dry in approximately 24 hours\n\nThese figures reflect how water-based fillers work: as water evaporates from the acrylic paste, the material cures and hardens. Deeper fills hold more moisture and need more time. Sanding or painting before the 24-hour mark on a deep repair risks surface deformation, poor paint adhesion, or cracking — which means doing the job twice.\n\nAmbient conditions affect dry times too. High humidity, low temperatures, or poor ventilation will all extend drying. In cooler or more humid environments, allow extra time before moving to the next step.\n\n### Maximum repair depth: 6mm\n\nThe 6mm maximum depth is a genuine advantage over standard surface fillers, which typically handle repairs of just 1–2mm. For holes or cracks deeper than 6mm, build up the repair in layers — apply the first layer to a maximum depth of 6mm, let it dry fully, then add subsequent layers as needed. This staged approach maintains the integrity of the repair and prevents the excessive shrinkage that comes with applying large volumes of filler in a single pass.\n\n### Available formats\n\n| Format | Best suited for |\n|---|---|\n| 230g Tottle | Small, targeted repairs; easy squeeze application |\n| 230g Tub | Small to medium repairs with blade application |\n| 450g Tub | Medium repairs or multiple smaller repairs |\n| 1kg Tub | Large-scale repairs or renovation projects |\n\nChoosing the right format means less waste and exactly the right amount of product for the job.\n\n---\n\n## Application guide\n\n### Surface preparation\n\nSurface preparation is the foundation of a repair that lasts. Before applying No More Cracks Large Cracks & Holes:\n\n1. **Clean the area** — remove all loose material, dust, paint flakes, grease, and debris from the crack or hole. A stiff brush or vacuum handles this well.\n2. **Ensure the surface is dry** — moisture trapped beneath the filler undermines adhesion and extends dry times.\n3. **Prime exterior surfaces** — for outdoor applications, priming before application is mandatory, not optional.\n4. **Undercut deep cracks** — for cracks approaching 6mm, slightly undercutting the edges creates a mechanical key that locks in adhesion and strengthens the repair.\n\n### Application method\n\n1. Using a **filling blade or scraper**, press the filler firmly into the crack or hole, working it fully into the void to eliminate air pockets.\n2. **Scrape off excess** material, leaving the repair slightly proud of the surrounding surface to allow for minor settling during drying.\n3. Allow to **dry fully** — 2–3 hours for shallow repairs, 24 hours for deeper fills.\n4. Once dry, **sand smooth** with fine-grit sandpaper until the repair sits flush with the surrounding surface.\n5. The repaired area is ready for **priming and painting**.\n\nFor the Tottle format, the squeeze-tube design allows direct application into narrow cracks without a blade, giving you precise control on smaller repairs.\n\n### Layering for deep repairs\n\nFor repairs exceeding 6mm in depth, build the repair in stages — never attempt to fill the full void in a single application.\n\n- Apply the first layer to a maximum depth of 6mm\n- Allow to dry completely (24 hours minimum)\n- Apply subsequent layers as required, drying between each\n- Sand and finish once the final layer has fully cured\n\n---\n\n## Exterior use: requirements and limitations\n\nNo More Cracks Large Cracks & Holes is built for exterior applications, but a few requirements apply.\n\n**Mandatory requirements for exterior use:**\n- The surface must be **primed before application**\n- The repair must be **painted over** once dry — the filler is not designed to be left exposed to the elements long-term\n- The repair must be **protected from rain** until it has been painted\n\n**Surfaces not suitable for exterior use with this product:**\n- **Exterior timber prone to excessive water absorption** — repeated swelling and contraction in highly absorbent timber will stress the repair and cause it to break down over time\n\nFor exterior timber with high moisture movement, a flexible sealant or a product specifically formulated for timber movement is the better choice.\n\n---\n\n## Limitations and when to use a different product\n\nNo More Cracks Large Cracks & Holes is a high-performance filler, but it's built for specific applications. Using it outside those parameters won't give you the result you're after.\n\n### Temperature limitation\n\nDo not apply below 5°C. At low temperatures, the water-based acrylic formula cannot cure correctly — the product may stay soft, bond poorly, or crack as temperatures fluctuate. In cooler months, confirm that both the ambient temperature and the surface temperature are above 5°C before and during application, and that temperatures will stay above this threshold throughout the full drying period.\n\n### Movement cracks\n\nThis product is not suitable for cracks where movement occurs — expansion joints, cracks caused by ongoing structural movement, or gaps between different building materials that expand and contract at different rates. A rigid filler applied to a moving crack will crack again as the substrate moves. That's not a product failure; it's the wrong tool for the job.\n\nFor cracks and gaps subject to movement, **Selleys No More Gaps®** is the right solution. It's a flexible sealant built to accommodate movement, delivering lasting performance where a rigid filler would give way.\n\n### Structural repairs\n\nNo More Cracks Large Cracks & Holes is a surface filler, not a structural repair compound. It is not designed to restore load-bearing capacity to damaged surfaces. Cracks that indicate structural movement or damage need assessment by a qualified professional before any cosmetic repair is started.\n\n---\n\n## Storage and product care\n\n- **Seal the tub or tottle tightly** after each use to prevent the filler from drying out\n- **Store in a cool, dry location** away from direct sunlight and extreme temperatures\n- **Do not allow the product to freeze** — freezing permanently alters the consistency of the water-based formula and renders it unusable\n- If a skin forms on the surface of an opened tub, remove and discard it before use. The product beneath is typically still fine if it has been stored correctly\n\n---\n\n## Safety considerations\n\nAs a water-based acrylic product, No More Cracks Large Cracks & Holes carries a low hazard profile compared to solvent-based fillers. Standard precautions still apply:\n\n- **Ventilation:** Keep airflow moving when working in enclosed spaces, particularly during sanding, where fine dust from dried filler can be an irritant\n- **Skin and eye contact:** Avoid prolonged skin contact with the wet product and keep it away from eyes. Wash hands thoroughly after use\n- **Sanding dust:** When sanding cured filler, wear a dust mask rated for fine particles to avoid inhaling particulate matter\n- **Disposal:** Do not dispose of wet product down drains. Allow small amounts to dry fully before disposal with general waste, or follow your local council guidelines for larger quantities\n\n---\n\n## Tips for better results\n\n- **Dampen highly absorbent surfaces slightly** before applying filler to bare plaster or mortar. This slows the rate at which the substrate draws moisture from the filler, improving adhesion and reducing the risk of premature drying at the bond interface.\n- **Use a flexible blade** rather than a rigid scraper for larger repairs. It gives you better control when feathering the edges into the surrounding surface, producing a smoother finish that needs less sanding.\n- **Prime before painting** — even on interior repairs. A coat of primer over the filled area seals the surface and ensures paint absorbs evenly. Skip this step and the repaired patch can show through as a dull spot in the finished coat.\n- **Work in moderate conditions:** the ideal application environment is between 10°C and 25°C with moderate humidity. Avoid applying in direct sunlight on hot days — rapid surface drying can cause the outer layer to skin over before the interior has cured, trapping moisture and leading to cracking.\n\n---\n\n## References\n\n- [Selleys No More Cracks Large Cracks & Holes – Product Page, Selleys Australia](https://www.selleys.com.au/fillers/no-more-cracks-large-cracks-holes/)\n- [DuluxGroup Pty Ltd – Selleys Brand Information](https://www.duluxgroup.com.au/our-brands/selleys/)\n- Based on manufacturer Technical Data Sheet (Version 2) provided with product specifications — Selleys / DuluxGroup Pty Ltd\n\n## Frequently asked questions\n\nWhat is Selleys No More Cracks Large Cracks & Holes: A ready-to-use water-based acrylic filler\n\nWho manufactures this product: DuluxGroup Pty Ltd under the Selleys brand\n\nWhat is the maximum repair depth: 6mm\n\nIs it ready to use: Yes, no mixing required\n\nWhat is the formula type: Water-based acrylic\n\nCan it be used indoors: Yes\n\nCan it be used outdoors: Yes, with conditions\n\nIs priming required for exterior use: Yes, mandatory before application\n\nDoes it require painting over on exterior surfaces: Yes\n\nIs it suitable for hairline cracks: Yes\n\nIs it suitable for large cracks: Yes, up to 6mm deep\n\nWhat surfaces is it compatible with: Plaster, mortar, concrete, timber, and primed metal\n\nIs it compatible with plaster: Yes\n\nIs it compatible with mortar: Yes\n\nIs it compatible with concrete: Yes\n\nIs it compatible with timber: Yes\n\nIs it compatible with metal: Yes, only primed metal\n\nIs it compatible with unprimed metal: No\n\nIs it suitable for exterior timber with high water absorption: No\n\nWhy is it not suitable for highly absorbent exterior timber: Swelling and contraction breaks down the repair\n\nIs it suitable for movement cracks: No\n\nWhat product is recommended for movement cracks: Selleys No More Gaps®\n\nIs it suitable for structural repairs: No\n\nWhat is the dry time for repairs under 2mm: 2–3 hours\n\nWhat is the dry time for repairs up to 6mm: 24 hours\n\nDoes humidity affect dry time: Yes, high humidity extends drying\n\nDoes temperature affect dry time: Yes, low temperatures extend drying\n\nWhat is the minimum application temperature: 5°C\n\nWhat happens if applied below 5°C: Product may stay soft, bond poorly, or crack\n\nWhat is the ideal application temperature range: 10°C to 25°C\n\nShould you apply in direct sunlight on hot days: No\n\nWhy avoid direct sunlight during application: Outer layer skins over before interior cures\n\nCan repairs deeper than 6mm be filled: Yes, in layers\n\nWhat is the maximum depth per layer for deep repairs: 6mm\n\nHow long must you wait between layers: 24 hours minimum\n\nDoes the product shrink when drying: Minimal shrinkage\n\nWhy is minimal shrinkage important: Keeps the repair flush with the surrounding surface\n\nDoes it have strong adhesion: Yes, superior adhesion\n\nAre VOC levels low: Yes, water-based formula keeps VOCs low\n\nHow do you clean up tools after use: Wash with water before the filler cures\n\nCan tools be cleaned with water after curing: No, clean before curing\n\nWhat formats is it available in: 230g Tottle, 230g Tub, 450g Tub, and 1kg Tub\n\nWhat is the 230g Tottle best suited for: Small, targeted repairs\n\nWhat is the 1kg Tub best suited for: Large-scale repairs or renovation projects\n\nWhat is the 450g Tub best suited for: Medium repairs or multiple smaller repairs\n\nDoes the Tottle allow direct application without a blade: Yes\n\nWhat tool is recommended for larger repairs: A flexible blade or scraper\n\nShould the repair be left slightly proud of the surface: Yes, to allow for minor settling\n\nWhen should you sand the repair: After fully dry\n\nWhat sandpaper type is recommended for finishing: Fine-grit sandpaper\n\nShould you prime before painting the repair: Yes, even on interior repairs\n\nWhy prime before painting: Ensures paint absorbs evenly over the repair\n\nDoes skipping primer affect appearance: Yes, repaired patch can show as a dull spot\n\nShould the surface be clean before application: Yes\n\nShould the surface be dry before application: Yes\n\nIs undercutting deep cracks recommended: Yes\n\nWhy undercut deep cracks: Creates a mechanical key that strengthens adhesion\n\nShould highly absorbent surfaces be dampened before filling: Yes, slightly\n\nWhy dampen absorbent surfaces before filling: Slows moisture draw from filler, improving adhesion\n\nMust exterior repairs be protected from rain before painting: Yes\n\nCan the product freeze during storage: No, freezing ruins the formula\n\nWhat does freezing do to the product: Permanently alters consistency, rendering it unusable\n\nHow should the product be stored: Sealed tightly in a cool, dry location\n\nShould it be stored away from direct sunlight: Yes\n\nCan a skin that forms on an opened tub be used: No, discard the skin before use\n\nIs the product beneath a skin still usable: Yes, if stored correctly\n\nIs ventilation required during application: Yes, especially in enclosed spaces\n\nIs ventilation required during sanding: Yes\n\nShould you wear a dust mask when sanding: Yes, rated for fine particles\n\nShould prolonged skin contact with wet product be avoided: Yes\n\nShould the wet product be kept away from eyes: Yes\n\nCan wet product be disposed of down drains: No\n\nHow should small amounts of wet product be disposed of: Allow to dry fully, then dispose with general waste\n\nIs this product a low-hazard product: Yes, compared to solvent-based fillers\n\n---\n\n## Label facts summary\n\n> **Disclaimer:** All facts and statements below are general product information, not professional advice. Consult relevant experts for specific guidance.\n\n### Verified label facts\n\n- **Product name:** Selleys No More Cracks™ Large Cracks & Holes\n- **Manufacturer:** DuluxGroup Pty Ltd (under the Selleys brand)\n- **Formula type:** Water-based acrylic\n- **Ready to use:** Yes — no mixing required\n- **Available formats:** 230g Tottle, 230g Tub, 450g Tub, 1kg Tub\n- **Maximum repair depth:** 6mm per layer\n- **Dry time (repairs under 2mm):** Approximately 2–3 hours\n- **Dry time (repairs up to 6mm):** Approximately 24 hours\n- **Minimum application temperature:** 5°C\n- **Ideal application temperature range:** 10°C–25°C\n- **Compatible surfaces:** Plaster, mortar, concrete, timber, primed metal\n- **Unprimed metal:** Not compatible\n- **Interior use:** Yes\n- **Exterior use:** Yes, with conditions\n- **Exterior priming:** Mandatory before application\n- **Exterior painting:** Required — product must not be left exposed to elements long-term\n- **Exterior rain protection:** Required until repair has been painted\n- **Exterior timber with high water absorption:** Not suitable\n- **Movement cracks:** Not suitable\n- **Structural repairs:** Not suitable\n- **Maximum depth per layer (deep repairs):** 6mm\n- **Minimum wait between layers:** 24 hours\n- **Freezing:** Must not be stored below freezing — permanently alters consistency\n- **Storage:** Sealed tightly in a cool, dry location, away from direct sunlight\n- **Skin on opened tub:** Discard skin before use; product beneath is typically still usable if stored correctly\n- **Tool cleanup:** Wash with water before product cures; cannot be cleaned with water after curing\n- **Wet product disposal:** Do not dispose down drains; allow small amounts to dry fully before disposing with general waste\n- **Dust mask required when sanding:** Yes — rated for fine particles\n- **Prolonged skin contact (wet product):** Avoid\n- **Eye contact (wet product):** Avoid\n- **Ventilation:** Required during application in enclosed spaces and during sanding\n- **VOC level:** Low (water-based formula)\n- **Recommended for movement cracks:** Selleys No More Gaps® (flexible sealant)\n\n### General product claims\n\n- Delivers reliable, lasting repairs on substantial surface damage where standard fillers cannot\n- Superior adhesion and minimal shrinkage compared to standard or plaster-based fillers\n- Suitable for older homes, high-traffic areas, and weather-affected surfaces\n- Deeper repair capacity (up to 6mm) is a key performance advantage over standard surface fillers typically suited to 1–2mm repairs\n- Smooth, easy-to-work paste consistency\n- Broad multi-surface compatibility reduces the need for multiple specialised filler products\n- Flexible blade recommended over rigid scraper for larger repairs to improve feathering and finish quality\n- Slightly dampening highly absorbent surfaces before application improves adhesion and reduces premature drying at the bond interface\n- Leaving the repair slightly proud of the surface allows for minor settling during drying\n- Priming before painting (including interior repairs) ensures even paint absorption and prevents dull spots over the repaired area\n- Avoiding application in direct sunlight on hot days prevents outer layer skinning before interior cures\n- Undercutting deep crack edges creates a mechanical key that strengthens adhesion\n- Low hazard profile compared to solvent-based fillers",
  "geography": {},
  "metadata": {},
  "publishedAt": "",
  "workspaceId": "77ac21fe-85f0-45c0-8279-2da0c52dc749",
  "_links": {
    "canonical": "https://directory.selleys.com.au/web-crawled-products/selleys-no-more-cracks-large-cracks-holes-11/"
  },
  "productInfo": {
    "stock": true
  },
  "productFeedItemId": "a9367352-ade7-4884-ab3d-9f8a7ae7e297"
}