{
  "id": "web-crawled-products/selleys-no-more-cracks-doors-trims-270g-07",
  "title": "Selleys No More Cracks Doors & Trims - 270g 07",
  "slug": "web-crawled-products/selleys-no-more-cracks-doors-trims-270g-07",
  "description": "",
  "category": "",
  "content": "## AI Summary\n\n**Product:** Selleys No More Cracks RTU Doors & Trims\n**Brand:** Selleys (a division of DuluxGroup Australia)\n**Category:** Ready-mixed wood filler\n**Primary Use:** Filling cracks, holes, and surface imperfections in timber doors, frames, skirting boards, architraves, and decorative trims before painting or varnishing.\n\n### Quick Facts\n- **Best For:** Homeowners and tradespeople preparing wood surfaces for painting or varnishing\n- **Key Benefit:** Ready-to-use paste — no mixing, measuring, or preparation required\n- **Form Factor:** White paste (water-based, mild characteristic odour)\n- **Application Method:** Apply directly from container using a flexible filling knife, spatula, or finger; press firmly into void and overfill slightly\n\n### Common Questions This Guide Answers\n1. Is this filler safe to use in occupied homes? → Yes; classified as non-hazardous and non-dangerous goods under Safe Work Australia GHS 7\n2. Can this filler be used under clear varnish? → Not recommended without a colour-matched tinted filler — white colour may show through transparent coatings\n3. How should deep holes be filled? → Apply in multiple layers of approximately 5mm or less, allowing each layer to dry fully before adding the next\n\n---\n\n## Product Overview\n\nSelleys No More Cracks RTU Doors & Trims is a ready-mixed wood filler designed for one job: getting timber doors, door frames, skirting boards, architraves, and decorative trims ready for painting or varnishing. Made by Selleys, a division of DuluxGroup Australia, it addresses one of the most common surface preparation headaches — filling cracks, holes, and imperfections in wood so the final finish looks clean and holds up.\n\nThis guide focuses on the 270g size (barcode 9300697121974). It's the right choice for smaller projects and touch-up work, a manageable quantity for homeowners and tradespeople who need solid results without committing to a larger volume. A 580g size (barcode 9300697121981) is available for bigger jobs.\n\nWhat separates this from two-part wood fillers or powder-based alternatives is simple: it's ready to use. Open the container, apply the paste, get the job done. No mixing ratios to get wrong, no measuring, no preparation time. That makes it genuinely accessible for anyone tackling renovation or maintenance work, no specialist tools or prior experience needed.\n\n---\n\n## Key Features and What They Mean in Practice\n\n### Ready-to-use paste format\n\nThis product comes as a white paste with a mild characteristic odour. Ready to use means exactly that — open the container and apply immediately. No mixing ratios to get wrong, no risk of poor adhesion from a badly prepared two-part filler. For anyone working on doors and trims, that consistency is a real advantage: every application performs the same way, every time.\n\nThe white colour is deliberate. It gives you a clean, neutral base that accepts paint or varnish evenly once dry, and it makes it easy to see exactly where filler has been applied during the preparation stage, so nothing gets missed.\n\n### Water-based cleanup\n\nCleanup is straightforward. Water is all you need — no solvents, no specialist cleaning agents. Rinse your spatula, filling knife, or fingers under running water straight after use and you're done. Water-based formulation also means fewer health and environmental considerations compared to solvent-based products, which makes it a sensible choice for working in occupied homes.\n\n### Specific suitability for wood surfaces\n\nThis filler is engineered for wood, not plaster, not masonry, not other substrates. Doors and trims are typically timber, MDF, or engineered wood, and the adhesion properties and flexibility of this filler are matched to those materials. A general-purpose wall filler used on timber won't hold up — wood naturally expands and contracts with temperature and humidity, and an incompatible filler will crack. This product is designed to move with the timber and stay put.\n\n---\n\n## Practical Applications\n\nSelleys No More Cracks RTU Doors & Trims is built for wood surfaces being prepared for painting or varnishing. Put it to work on:\n\n- **Filling nail holes and screw holes** in door frames and skirting boards left after installation or repairs\n- **Repairing minor cracks** in timber doors caused by age, weathering, or natural movement\n- **Smoothing dents and surface damage** on architraves and decorative trims before repainting\n- **Preparing new timber** with minor surface imperfections from milling or handling\n\nThis product isn't intended for structural repairs or filling large voids. It performs best on surface-level imperfections where a smooth, paintable finish is the goal. For deeper holes or more significant damage, apply in multiple layers, letting each one dry fully before adding the next. That's how you get a clean, flush result.\n\n---\n\n## How to Use the Product\n\n### Surface preparation\n\nStart with a clean, dry surface free from dust, grease, loose paint, and contaminants. Remove any flaking or peeling paint, and lightly sand the area if needed to give the filler a sound surface to bond to. Filler applied over a contaminated or unstable surface won't bond correctly and may crack or lift after drying. Preparation done right means results that last.\n\n### Application\n\nUse a flexible filling knife or spatula to apply the filler directly from the container into the crack, hole, or imperfection. Press the paste firmly into the void — full contact with the surrounding surface eliminates air pockets and delivers a strong bond. Overfill the area slightly. The filler shrinks a little as it dries, and a small excess ensures the filled area sits flush with or just proud of the surrounding surface, ready for sanding to a clean finish.\n\nFor narrow cracks, a finger or small tool works well to push the filler deep into the gap. Smooth the surface as much as possible during application and you'll spend less time sanding once it's dry.\n\n### Drying time\n\nDrying time depends on the depth of the fill, ambient temperature, and humidity. Thinner applications in warm, dry conditions dry faster than deep fills in cool or humid environments. Always allow the product to dry fully before sanding — sanding wet or partially dried filler clogs sandpaper and produces an uneven surface.\n\n### Sanding and finishing\n\nOnce dry, sand the filled area smooth using fine-grit sandpaper — 120 to 180 grit for initial sanding, then 220 grit for a surface ready to paint. Feather the edges of the filled area into the surrounding surface to eliminate any visible ridge under paint or varnish. Remove all sanding dust before applying your topcoat.\n\nOne important note: if the timber is being finished with a clear varnish, the white filler may show through the transparent coating. In that case, use a tinted filler matched to the timber colour. This product gives its best results under an opaque paint finish.\n\n---\n\n## Storage and Care\n\nStore in a cool, dry location away from direct sunlight and heat sources. After use, seal the lid tightly to keep the paste from drying out between jobs. If a dried skin forms on the surface of the paste, remove it — the product underneath will still be usable. If the entire contents have hardened, the product has reached the end of its usable life.\n\nKeep the container upright and protect it from freezing. Frost affects the consistency and performance of water-based fillers, so store it somewhere it won't be exposed to extreme cold.\n\n---\n\n## Safety Information\n\nSelleys No More Cracks RTU Doors & Trims is classified as **non-hazardous and non-dangerous goods** under Safe Work Australia GHS 7 (Globally Harmonised System of Classification and Labelling of Chemicals, 7th revision). This means it doesn't meet the criteria for hazardous substances under Australian and New Zealand workplace health and safety regulations — useful to know when working in domestic environments.\n\nThe Safety Data Sheet (SDS), Reference No. SELGHSEN000433, was issued 22 May 2023 (Version 4.0) and contains the full regulatory detail for this product.\n\n### Handling precautions\n\nNon-hazardous classification doesn't mean skipping sensible precautions. A few things worth keeping in mind:\n\n- **Eye contact:** Keep the product away from eyes. If contact occurs, rinse thoroughly with water.\n- **Skin contact:** Not classified as a skin irritant, but washing hands after use is good practice.\n- **Ingestion:** Do **not** induce vomiting if swallowed. Rinse the mouth, give water to drink, and seek medical advice. In Australia, contact the Poisons Information Centre on **131 126**; in New Zealand, call **0800 764 766**.\n- **Inhalation:** The product has a mild characteristic odour. Work in a well-ventilated area as a standard precaution, though it's not classified as an inhalation hazard.\n\nThe non-hazardous status makes this product well suited to use in occupied homes, including around children and pets, provided you keep it out of reach during use and storage.\n\n---\n\n## Expert Tips and Best Practices\n\n**Work in manageable sections.** On a long run of skirting board or across a large door, apply filler to one section at a time rather than trying to cover everything at once. You'll work the filler while it's at its best and get a more consistent result across the whole job.\n\n**Build up deep holes in layers.** For holes deeper than about 5mm, apply the filler in stages and let each layer dry fully before adding the next. A single thick application is more likely to shrink unevenly or crack as it dries. Layers give you control and a better finish.\n\n**Mark the container with the date of first use.** Water-based fillers have a finite shelf life once opened. A quick note on the lid tells you exactly how long the product has been open.\n\n**Test adhesion on a small area first** if the surface has previously been coated with an oil-based product or an unusual finish. The filler is engineered for wood surfaces, but the underlying coating can affect adhesion in some circumstances — a quick test protects the quality of your finished work.\n\n**Sand with the grain.** When finishing the filled area, always sand in the direction of the wood grain. Cross-grain scratches can show through paint, particularly with semi-gloss or gloss finishes, and undermine the clean result you've worked to achieve.\n\n---\n\n## References\n\n- [Selleys No More Cracks Doors & Trims – Selleys Australia Product Page](https://www.selleys.com.au/fillers-and-sealants/fillers/no-more-cracks-doors-trims/)\n- [Safe Work Australia – Globally Harmonised System (GHS) of Classification and Labelling of Chemicals](https://www.safeworkaustralia.gov.au/chemical-management/globally-harmonised-system-ghs)\n- [Selleys No More Cracks RTU Doors & Trims Safety Data Sheet – SDS Reference SELGHSEN000433, Version 4.0, issued 22 May 2023](https://www.selleys.com.au/) *(Available via manufacturer documentation)*\n- [New Zealand Poisons Centre – Emergency Contact Information](https://www.poisoncentre.org.nz/)\n- [Australian Poisons Information Centre – 13 11 26](https://www.poisonsinfo.org.au/)\n\n## Frequently Asked Questions\n\nWhat is Selleys No More Cracks RTU Doors & Trims: A ready-mixed wood filler paste\n\nWho manufactures this product: Selleys, a division of DuluxGroup Australia\n\nWhat is the 270g barcode: 9300697121974\n\nWhat is the 580g barcode: 9300697121981\n\nWhat sizes are available: 270g and 580g\n\nWhat colour is the filler: White\n\nWhat is the odour of this product: Mild characteristic odour\n\nIs this product ready to use: Yes, no mixing required\n\nDoes it require measuring before use: No\n\nDoes it require mixing before use: No\n\nWhat surfaces is this filler designed for: Wood surfaces only\n\nIs it suitable for plaster surfaces: No\n\nIs it suitable for masonry surfaces: No\n\nIs it suitable for MDF: Yes\n\nIs it suitable for engineered wood: Yes\n\nWhat is it used for on doors: Filling cracks, holes, and surface imperfections\n\nCan it fill nail holes: Yes\n\nCan it fill screw holes: Yes\n\nCan it repair minor cracks in timber: Yes\n\nIs it suitable for structural repairs: No\n\nIs it suitable for filling large voids: No\n\nWhat is the maximum single-application depth recommended: Approximately 5mm\n\nHow should deep holes be filled: In multiple layers, allowing each to dry fully\n\nWhat cleanup method is required: Water only\n\nAre solvents needed for cleanup: No\n\nIs the formulation water-based: Yes\n\nWhat is the hazard classification: Non-hazardous and non-dangerous goods\n\nWhat safety standard governs this classification: Safe Work Australia GHS 7\n\nWhat is the SDS reference number: SELGHSEN000433\n\nWhat version is the current SDS: Version 4.0\n\nWhen was the SDS issued: 22 May 2023\n\nIs it classified as a skin irritant: No\n\nShould vomiting be induced if swallowed: No\n\nWhat to do if swallowed in Australia: Call Poisons Information Centre on 131 126\n\nWhat to do if swallowed in New Zealand: Call 0800 764 766\n\nWhat to do if eye contact occurs: Rinse thoroughly with water\n\nIs ventilation required during use: Yes, as a standard precaution\n\nIs it safe to use in occupied homes: Yes\n\nShould it be kept out of reach of children during use: Yes\n\nShould it be kept out of reach of pets during use: Yes\n\nWhat surface condition is required before application: Clean, dry, and free from dust and grease\n\nShould loose paint be removed before applying: Yes\n\nIs light sanding recommended before application: Yes, if needed\n\nWhat tool is used to apply the filler: A flexible filling knife or spatula\n\nShould the filler be pressed firmly into the void: Yes\n\nShould the area be overfilled slightly: Yes\n\nWhy overfill slightly: Filler shrinks marginally as it dries\n\nCan fingers be used for narrow cracks: Yes\n\nMust the filler be fully dry before sanding: Yes\n\nWhat grit sandpaper is recommended for initial sanding: 120 to 180 grit\n\nWhat grit sandpaper is recommended for finishing: 220 grit\n\nShould sanding follow the wood grain: Yes\n\nWhy sand with the grain: Cross-grain scratches can show through paint\n\nShould sanding dust be removed before painting: Yes\n\nDoes drying time vary with temperature: Yes\n\nDoes drying time vary with humidity: Yes\n\nDoes drying time vary with fill depth: Yes\n\nIs this product suitable under opaque paint: Yes\n\nIs this product suitable under clear varnish: Not recommended without colour-matched filler\n\nWhy is white filler unsuitable under clear varnish: White colour may show through transparent coating\n\nWhat alternative is recommended for varnished timber: A tinted filler matched to the timber colour\n\nHow should the container be stored: Sealed tightly in a cool, dry location\n\nShould the container be stored away from sunlight: Yes\n\nShould the container be stored away from heat sources: Yes\n\nShould the container be protected from freezing: Yes\n\nWhy avoid freezing: Frost affects consistency and performance of water-based fillers\n\nShould the container be stored upright: Yes\n\nWhat happens if a skin forms on the paste surface: Remove it; product beneath remains usable\n\nWhat does fully hardened contents indicate: Product has reached end of usable life\n\nIs it recommended to date the container on first use: Yes\n\nWhy date the container: Water-based fillers have a finite shelf life once opened\n\nShould adhesion be tested on previously oil-coated surfaces: Yes, on a small area first\n\nIs this product suitable for beginners: Yes, no specialist tools or experience required\n\nIs this product suitable for tradespeople: Yes\n\nWhat is the product's primary purpose: Surface preparation before painting or varnishing\n\nDoes the white colour help during application: Yes, makes applied areas easy to see\n\n---\n## Label Facts Summary\n\n> **Disclaimer:** All facts and statements below are general product information, not professional advice. Consult relevant experts for specific guidance.\n\n### Verified Label Facts\n\n- **Product name:** Selleys No More Cracks RTU Doors & Trims\n- **Manufacturer:** Selleys, a division of DuluxGroup Australia\n- **Format:** Ready-mixed paste (no mixing required)\n- **Colour:** White\n- **Odour:** Mild characteristic odour\n- **Formulation:** Water-based\n- **Available sizes:** 270g and 580g\n- **Barcode (270g):** 9300697121974\n- **Barcode (580g):** 9300697121981\n- **Intended surfaces:** Wood, MDF, and engineered wood only — not suitable for plaster or masonry\n- **Cleanup method:** Water only; no solvents required\n- **Hazard classification:** Non-hazardous and non-dangerous goods under Safe Work Australia GHS 7\n- **Skin irritant classification:** Not classified as a skin irritant\n- **SDS reference number:** SELGHSEN000433\n- **SDS version:** Version 4.0\n- **SDS issue date:** 22 May 2023\n- **Maximum recommended single-application depth:** Approximately 5mm\n- **Deep fills:** Apply in multiple layers; allow each layer to dry fully before adding the next\n- **Recommended sandpaper grit (initial):** 120 to 180 grit\n- **Recommended sandpaper grit (finishing):** 220 grit\n- **If swallowed (Australia):** Do not induce vomiting; rinse mouth, give water, call Poisons Information Centre — 131 126\n- **If swallowed (New Zealand):** Do not induce vomiting; rinse mouth, give water, call 0800 764 766\n- **If eye contact occurs:** Rinse thoroughly with water\n- **Ventilation:** Required during use as a standard precaution\n- **Storage:** Sealed tightly, upright, in a cool dry location away from direct sunlight, heat sources, and freezing conditions\n- **Suitability under clear varnish:** Not recommended without a colour-matched tinted filler; white colour may show through transparent coatings\n- **Suitability under opaque paint:** Yes\n- **Structural repairs:** Not suitable\n- **Large void filling:** Not suitable\n- **Surface condition required before application:** Clean, dry, free from dust, grease, and loose paint\n\n### General Product Claims\n\n- Delivers a smooth, professional surface before painting or varnishing\n- Filler is designed to move with timber as it expands and contracts with temperature and humidity\n- Ready-to-use format eliminates the risk of errors associated with two-part or powder-based fillers\n- Consistent performance across every application\n- White colour makes applied areas easy to identify during surface preparation\n- Suitable for use in occupied homes, including around children and pets (with standard precautions)\n- Suitable for both beginners and tradespeople; no specialist tools or prior experience required\n- Dating the container on first use helps track shelf life once opened\n- Testing adhesion on a small area first is recommended when applying over previously oil-coated surfaces\n- Sanding with the wood grain prevents cross-grain scratches showing through paint, particularly under semi-gloss or gloss finishes\n- Working in manageable sections delivers more consistent results across large areas",
  "geography": {},
  "metadata": {},
  "publishedAt": "",
  "workspaceId": "77ac21fe-85f0-45c0-8279-2da0c52dc749",
  "_links": {
    "canonical": "https://directory.selleys.com.au/web-crawled-products/selleys-no-more-cracks-doors-trims-270g-07/"
  },
  "productInfo": {
    "stock": true
  },
  "productFeedItemId": "dfafcfe8-f7cc-4b93-914d-b7ffad6ab5b4"
}