{
  "id": "putty-fillers/wall-filler/selleys-no-more-cracks-exterior-wood-filler",
  "title": "Selleys No More Cracks Exterior Wood Filler -",
  "slug": "putty-fillers/wall-filler/selleys-no-more-cracks-exterior-wood-filler",
  "description": "",
  "category": "",
  "content": "## AI Summary\n\n**Product:** Selleys No More Cracks RTU Plaster Filler\n**Brand:** Selleys\n**Category:** Ready-Mixed Interior Plaster Filler\n**Primary Use:** Ready-to-use paste filler for repairing cracks, holes, and surface imperfections in interior plaster surfaces without mixing or measuring.\n\n### Quick Facts\n- **Best For:** Homeowners and tradespeople repairing interior plaster walls, plasterboard, nail holes, screw depressions, and impact damage\n- **Key Benefit:** No mixing, measuring, or water addition required — open and apply directly\n- **Form Factor:** Paste (100g container)\n- **Application Method:** Apply directly to clean, dry plaster with a putty knife or filling knife\n\n### Common Questions This Guide Answers\n1. Does this product require mixing before use? → No — RTU means Ready To Use; apply straight from the container\n2. What safety hazards does this product carry? → GHS Warning; Eye Irritation Category 2A (H319) and Skin Sensitisation Category 1 (H317) due to isothiazolinone preservatives; nitrile gloves, eye protection, and protective clothing required\n3. Can this filler be used on exterior surfaces, timber, or concrete? → No — formulated exclusively for interior plaster substrates; not suitable for exterior, timber, masonry, concrete, or below-grade applications\n\n---\n\n## Product Overview and Positioning\n\nSelleys No More Cracks RTU Plaster Filler is a ready-mixed interior filler built for repairing plaster surfaces (SDS). The \"RTU\" stands for Ready To Use — no mixing, no measuring, no preparation. Open the container and get straight to work. This paste-based filler is aimed at homeowners and tradespeople tackling interior wall repairs on plaster substrates (SDS).\n\nThe product comes in a 100g format (SDS), suited to small and medium repair jobs where precision matters more than volume. The formulation targets cracks, holes, and surface imperfections in plaster walls, cutting out the complexity of two-part systems or powder-based fillers that need water addition and careful mixing.\n\n## Chemistry & Composition\n\nThis filler uses a water-based formulation built around chemical components that give it reliable working properties and long-term preservation (SDS). The base matrix consists of non-hazardous ingredients that form the bulk of the product, providing filling and adhesive strength (SDS).\n\nThe formulation includes alcohols, C12-C14, ethoxylated, sulfates, sodium salts at 1-10% by weight — surfactants that control viscosity and improve workability (SDS). These surfactants let the paste spread smoothly while keeping enough body to fill voids without sagging.\n\nFor microbial preservation — essential in water-based fillers that could otherwise support bacterial or fungal growth during storage — the product uses a blend of isothiazolinone biocides at trace concentrations (SDS):\n\n- 1,2-Benzisothiazol-3(2H)-one (BIT) at less than 0.05% w/w (SDS)\n- 5-Chloro-2-methyl-4-isothiazolin-3-one (CMIT) at less than 0.05% w/w (SDS)\n- 2-Methyl-2H-isothiazol-3-one (MIT) at less than 0.05% w/w (SDS)\n- 2-Octyl-2H-isothiazol-3-one (OIT) at less than 0.1% w/w (SDS)\n\nThese isothiazolinone preservatives are broad-spectrum antimicrobials that work at very low concentrations, which is why they appear at sub-0.1% inclusion rates. Their presence does create the product's primary hazard profile — they are known skin sensitisers that require careful handling.\n\n## Hazard Classification & Safety Requirements\n\nSelleys No More Cracks RTU Plaster Filler carries a Warning signal word under the GHS classification system (SDS), meeting the criteria for two hazard classifications under Safe Work Australia GHS 7 standards (SDS).\n\n**Eye Irritation — Category 2A:** The filler causes serious eye irritation (H319). Contact with eyes produces reversible but significant irritation requiring immediate flushing (SDS). This hazard comes from the alkaline nature and surfactant content of the formulation.\n\n**Skin Sensitisation — Category 1:** The product may cause an allergic skin reaction (H317), attributed to the isothiazolinone preservatives (SDS). Repeated skin exposure can lead to sensitisation — after which even small amounts may trigger allergic contact dermatitis. Once sensitised, a person may react to the product indefinitely.\n\nThese hazards require protective gloves, protective clothing, and eye/face protection (P280) during handling (SDS). Nitrile rubber gloves are appropriate for intermittent contact, though users should assess suitability based on glove construction and their specific working conditions (SDS).\n\nThe hazard profile also calls for clear operational controls: avoid breathing dust, fume, gas, mist, vapours or spray (P261); wash hands, face and all exposed skin thoroughly after handling (P264); and ensure contaminated work clothing is not removed from the workplace without proper handling (P272) (SDS).\n\nThe product is not classified as a Dangerous Good under the Australian Code for the Transport of Dangerous Goods by Road & Rail or New Zealand NZS5433 standards, which simplifies storage and transport logistics (SDS).\n\n## Application Methodology\n\nAs a ready-mixed filler, this product removes the preparation phase that slows down powder-based systems. Apply the paste directly to clean, dry plaster surfaces using a putty knife, filling knife, or similar spreading tool. The ready-to-use consistency is pre-adjusted to an optimal working viscosity — firm enough to stay in place, smooth enough to spread with precision.\n\nWork in a well-ventilated area. This supports drying and keeps airborne exposure from wet material to a minimum. The substrate must be free of loose material, dust, grease, and any previous coating failures that could undermine adhesion. For deep voids, apply in multiple layers rather than one thick fill — this prevents extended drying times and shrinkage.\n\nDuring application, avoid breathing any mist or spray (P261) and wash hands thoroughly after handling (P264) (SDS).\n\n## Exposure Response Protocols\n\nThe product's hazard classification requires clearly defined first aid procedures for different exposure routes (SDS).\n\n**Skin contact:** If the filler contacts skin or hair, remove contaminated clothing immediately and flush affected areas with running water (SDS). Effects can be delayed, particularly in individuals developing sensitisation, so monitor for swelling, redness, blistering or irritation (SDS). Seek medical assistance if these symptoms appear (SDS). If skin irritation or rash develops, obtain medical advice or attention (P333+P313) (SDS).\n\n**Eye contact:** Hold eyelids apart and flush eyes continuously with running water until advised to stop by a Poisons Information Centre (Australia 131 126, New Zealand 0800 764 766) or a doctor, or for at least 15 minutes (SDS). Remove contact lenses during rinsing if possible (P305+P351+P338) (SDS). Seek medical care if eye irritation persists after flushing (P337+P313) (SDS).\n\n**Inhalation:** Move the affected person away from exposure immediately, ensuring rescuers protect themselves in the process (SDS). Remove contaminated clothing, loosen remaining garments, and allow the person to rest in a comfortable position while keeping warm (SDS). Seek medical advice if effects persist (SDS).\n\n**Ingestion:** Rinse the mouth with water — do not induce vomiting (SDS). Give a conscious person a glass of water to drink, and never administer anything by mouth to an unconscious patient (SDS). If vomiting occurs naturally, provide additional water (SDS). Seek medical advice for all ingestion incidents (SDS).\n\nFor poisoning incidents, contact the Poisons Information Centre (Australia 131 126, New Zealand 0800 764 766) or a doctor, and have the product container or label available for reference (P101) (SDS).\n\n## Workplace Safety Management\n\nContaminated work clothing must not leave the workplace without proper decontamination (P272) (SDS). This keeps sensitisers out of home environments where family members — especially children — could be exposed to contaminated garments.\n\nRemove contaminated clothing and wash before reuse (P362+P364) (SDS). Washing eliminates residual product that could otherwise cause cumulative sensitisation through repeated low-level contact with stored work clothing.\n\nFirst aiders attending to exposure incidents must wear their own PPE: safety shoes, overalls, gloves, and safety glasses (SDS). This prevents secondary exposure during rescue and treatment, which matters given the skin sensitisation hazard.\n\nKeep the product out of reach of children (P102) and read and follow all instructions carefully (P103) (SDS). These precautions are especially relevant in residential settings where the 100g package makes the product accessible for small home repairs.\n\n## Storage, Handling & Disposal\n\nThe ready-mixed formulation needs protection from drying and contamination during storage. Water-based fillers require frost protection — freeze-thaw cycles destroy paste structure and compromise performance. Keep the container tightly sealed between uses to prevent surface skinning and moisture loss.\n\nDuring handling, wash hands before smoking, eating, drinking or using the toilet (SDS). This prevents ingestion of material from contaminated hands, an important step given the skin sensitisation hazard.\n\nDispose of the product in compliance with local, regional, national and international regulations (P501) (SDS). While the product is not classified as a Dangerous Good, the presence of isothiazolinone preservatives may trigger specific waste classification requirements depending on your jurisdiction. Empty containers may be recyclable after appropriate cleaning, or may require disposal as contaminated packaging under local authority guidelines.\n\n## Material Identification & Emergency Information\n\nThe product is identified by bar code 9300697122070 and product code Bar Code 930069712207001 (SDS). The reference number for professional and emergency responders is SELGHSEN000431 (SDS). The product carries no Hazchem Code, consistent with its non-Dangerous Good classification (SDS).\n\nEmergency contact for incidents in Australia is 1800 220 770; in New Zealand, 0800 220 770 (SDS). These numbers provide 24-hour access to toxicological advice and incident management support. The manufacturer, with ABN 67 000 049 427, maintains a street address at 1956 Dandenong Road and a general enquiry line at 1300 555 205 (SDS).\n\n## Fire Behaviour & Suppression\n\nIn its paste form, this filler is non-combustible (SDS). Once the aqueous component evaporates, however, residual material can burn if ignited (SDS). This matters in fire scenarios where the product has dried on surfaces or in waste — the dried organic components become combustible once water content is gone.\n\nIf the material becomes involved in fire, use water fog or fine water spray, alcohol-resistant foam, standard foam, or dry agents such as carbon dioxide or dry chemical powder (SDS). The water content in fresh material assists suppression, since it must evaporate before combustion can occur.\n\n## Spill Management Procedures\n\nSpill response scales with incident size.\n\nFor small spills, wear protective equipment to prevent skin and eye contamination and avoid inhaling any airborne material (SDS). Wipe up material using absorbent media such as clean rags or paper towels, then collect and seal waste in properly labelled containers or drums for disposal according to local regulations (SDS).\n\nLarge spills require clearing the area of all unprotected personnel — the material creates slip hazards and exposure risks that need a controlled response (SDS). The product is slippery when spilt and must be cleaned up immediately to prevent accidents (SDS). Response personnel must wear full protective equipment to prevent skin and eye contamination and inhalation of dust or aerosols (SDS). Work upwind or with increased ventilation to keep airborne exposure to a minimum (SDS).\n\nFor large spills, cover the affected area using absorbent materials and containment measures to prevent spread before collection.\n\n## Suitability Assessment\n\nSelleys No More Cracks RTU Plaster Filler performs well within a clearly defined application range. It is recommended for ready-mixed interior filler applications on plaster (SDS), making it appropriate for:\n\n- Repairing cracks in plasterboard walls\n- Filling nail holes and screw depressions in plaster surfaces\n- Addressing impact damage to interior plaster\n- Preparing plaster walls for painting by filling minor imperfections\n\nThe 100g package suits homeowners tackling small repair projects rather than commercial contractors requiring multi-kilogram quantities. The ready-mixed format trades extended shelf life for immediate convenience — a reasonable trade-off for intermittent residential use where mixing equipment and specialist skill may be limited.\n\nThe product's positioning as an interior plaster filler also defines where it should not be used. It is not formulated for exterior exposure, timber substrates, masonry, concrete, or below-grade applications where moisture ingress or different substrate movement characteristics would undermine performance. The hazard profile also makes it less suitable for environments with young children or individuals with known isothiazolinone sensitivities, unless strict contamination controls are in place.\n\n## References\n\n- Source PDF: SELLEYS_NO_MORE_CRACKS_RTU_PLASTER_FILLER-AUS_GHS.pdf (canonical)\n\n---\n\n## Frequently Asked Questions\n\nWhat does RTU stand for: Ready To Use\n\nDoes it require mixing before use: No\n\nDoes it require measuring before use: No\n\nDoes it require water addition: No\n\nWhat is the product format: Paste\n\nWhat size does it come in: 100g\n\nWhat is it designed to repair: Cracks, holes, and surface imperfections in plaster\n\nIs it an interior or exterior filler: Interior only\n\nIs it suitable for exterior use: No\n\nWhat substrate is it designed for: Plaster surfaces\n\nIs it suitable for timber substrates: No\n\nIs it suitable for masonry: No\n\nIs it suitable for concrete: No\n\nIs it suitable for below-grade applications: No\n\nIs it suitable for plasterboard walls: Yes\n\nCan it fill nail holes: Yes\n\nCan it fill screw depressions: Yes\n\nCan it repair impact damage to plaster: Yes\n\nCan it be used to prepare walls for painting: Yes\n\nWho is the manufacturer: Selleys\n\nWhat is the manufacturer's ABN: 67 000 049 427\n\nWhat is the manufacturer's street address: 1956 Dandenong Road\n\nWhat is the general enquiry phone number: 1300 555 205\n\nWhat is the Australian emergency contact number: 1800 220 770\n\nWhat is the New Zealand emergency contact number: 0800 220 770\n\nWhat is the product's reference number: SELGHSEN000431\n\nWhat is the product barcode: 9300697122070\n\nIs it water-based: Yes\n\nIs it classified as a Dangerous Good for transport: No\n\nWhat is the GHS signal word: Warning\n\nWhat eye hazard classification does it carry: Eye Irritation Category 2A\n\nWhat skin hazard classification does it carry: Skin Sensitisation Category 1\n\nWhat hazard statement applies to eyes: H319 — causes serious eye irritation\n\nWhat hazard statement applies to skin: H317 — may cause an allergic skin reaction\n\nWhat causes the skin sensitisation hazard: Isothiazolinone preservatives\n\nCan repeated exposure cause permanent sensitisation: Yes\n\nOnce sensitised, can reactions recur with small amounts: Yes\n\nWhat gloves are recommended: Nitrile rubber gloves\n\nIs eye protection required during use: Yes\n\nIs protective clothing required during use: Yes\n\nShould you avoid breathing vapours during application: Yes\n\nShould you wash hands after handling: Yes\n\nWhat is the Australian Poisons Information Centre number: 131 126\n\nWhat is the New Zealand Poisons Information Centre number: 0800 764 766\n\nWhat should you do if it contacts skin: Flush with running water immediately\n\nShould you remove contaminated clothing after skin contact: Yes, immediately\n\nCan skin effects be delayed: Yes\n\nWhat should you do if it contacts eyes: Flush continuously with running water for at least 15 minutes\n\nShould contact lenses be removed during eye flushing: Yes, if possible\n\nWhat should you do if inhaled: Move affected person to fresh air immediately\n\nShould you induce vomiting if swallowed: No\n\nWhat should you give a conscious person if product is swallowed: A glass of water\n\nShould you give anything by mouth to an unconscious person: No\n\nShould you seek medical advice after ingestion: Yes\n\nWhat preservative type is used in the formulation: Isothiazolinone biocides\n\nIs 1,2-Benzisothiazol-3(2H)-one present: Yes, at less than 0.05% w/w\n\nIs 5-Chloro-2-methyl-4-isothiazolin-3-one present: Yes, at less than 0.05% w/w\n\nIs 2-Methyl-2H-isothiazol-3-one present: Yes, at less than 0.05% w/w\n\nIs 2-Octyl-2H-isothiazol-3-one present: Yes, at less than 0.1% w/w\n\nWhat do the surfactants in the formula do: Control viscosity and improve workability\n\nWhat surfactant type is included: Alcohols C12-C14, ethoxylated, sulfates, sodium salts\n\nWhat percentage of surfactants does the formula contain: 1–10% by weight\n\nIs the product in paste form combustible: No\n\nCan dried residue burn if ignited: Yes\n\nWhat extinguishing agents are suitable: Water fog, foam, CO2, or dry chemical powder\n\nDoes the product have a Hazchem Code: No\n\nShould the product be protected from frost: Yes\n\nCan freeze-thaw cycles damage the product: Yes\n\nShould the container be sealed between uses: Yes\n\nCan contaminated work clothing leave the workplace without decontamination: No\n\nShould contaminated clothing be washed before reuse: Yes\n\nShould first aiders wear PPE when treating exposed persons: Yes\n\nIs the product suitable for young children's environments: Only with strict contamination controls\n\nShould the product be kept out of reach of children: Yes\n\nIs it suitable for individuals with known isothiazolinone sensitivity: No\n\nIs the product slippery when spilt: Yes\n\nShould spills be cleaned up immediately: Yes\n\nWhat should be used to clean up small spills: Absorbent media such as clean rags or paper towels\n\nShould waste be sealed in labelled containers for disposal: Yes\n\nIs disposal subject to local regulations: Yes\n\nShould deep voids be filled in multiple layers: Yes\n\nDoes single thick-layer application cause problems: Yes, extended drying and shrinkage\n\nWhat tool is recommended for application: Putty knife or filling knife\n\nShould the substrate be clean and dry before application: Yes\n\nShould loose material be removed before application: Yes\n\nShould greasy surfaces be cleaned before application: Yes\n\nIs ventilation recommended during application: Yes\n\nWhat is the product's regulatory standard: Safe Work Australia GHS 7\n\n---\n\n---\n\n## Label Facts Summary\n\n> **Disclaimer:** All facts and statements below are general product information, not professional advice. Consult relevant experts for specific guidance.\n\n### Verified Label Facts\n\n**Product Identification**\n- Product name: Selleys No More Cracks RTU Plaster Filler\n- Manufacturer: Selleys\n- Manufacturer ABN: 67 000 049 427\n- Manufacturer street address: 1956 Dandenong Road\n- Product barcode: 9300697122070\n- Product code: Bar Code 930069712207001\n- Reference number: SELGHSEN000431\n- General enquiry phone: 1300 555 205\n- Australian emergency contact: 1800 220 770\n- New Zealand emergency contact: 0800 220 770\n- Australian Poisons Information Centre: 131 126\n- New Zealand Poisons Information Centre: 0800 764 766\n\n**Format & Size**\n- Product format: Paste (ready-mixed)\n- Net weight: 100g\n- RTU designation: Ready To Use — no mixing, measuring, or water addition required\n\n**Intended Use & Substrate**\n- Application type: Interior filler\n- Designed substrate: Plaster surfaces (including plasterboard walls)\n- Suitable for: Cracks, holes, nail holes, screw depressions, impact damage, surface imperfections in plaster\n- Suitable for preparing plaster walls for painting: Yes\n- Not suitable for: Exterior use, timber substrates, masonry, concrete, below-grade applications\n\n**Formulation**\n- Base type: Water-based\n- Surfactant: Alcohols, C12-C14, ethoxylated, sulfates, sodium salts — 1–10% by weight\n- Preservative: 1,2-Benzisothiazol-3(2H)-one (BIT) — less than 0.05% w/w\n- Preservative: 5-Chloro-2-methyl-4-isothiazolin-3-one (CMIT) — less than 0.05% w/w\n- Preservative: 2-Methyl-2H-isothiazol-3-one (MIT) — less than 0.05% w/w\n- Preservative: 2-Octyl-2H-isothiazol-3-one (OIT) — less than 0.1% w/w\n\n**Hazard Classification (Safe Work Australia GHS 7)**\n- GHS signal word: Warning\n- Eye Irritation — Category 2A: H319 — causes serious eye irritation\n- Skin Sensitisation — Category 1: H317 — may cause an allergic skin reaction\n- Sensitisation cause: Isothiazolinone preservatives\n- Repeated exposure can cause permanent sensitisation: Yes\n- Once sensitised, small amounts may trigger reactions: Yes\n- Classified as Dangerous Good (road/rail transport, AU & NZ): No\n- Hazchem Code: None\n\n**Required PPE (P280)**\n- Protective gloves (nitrile rubber recommended for intermittent contact)\n- Protective clothing\n- Eye/face protection\n\n**Precautionary Statements**\n- P261: Avoid breathing dust, fume, gas, mist, vapours or spray\n- P264: Wash hands, face and all exposed skin thoroughly after handling\n- P272: Contaminated work clothing must not leave the workplace without proper decontamination\n- P362+P364: Remove contaminated clothing and wash before reuse\n- P102: Keep out of reach of children\n- P103: Read and follow all instructions carefully\n- P501: Dispose of contents/container in accordance with local regulations\n\n**First Aid — Skin Contact**\n- Flush with running water immediately; remove contaminated clothing\n- Skin effects may be delayed — monitor for swelling, redness, blistering, irritation\n- Seek medical advice if skin irritation or rash develops (P333+P313)\n\n**First Aid — Eye Contact**\n- Flush continuously with running water for at least 15 minutes (P305+P351+P338)\n- Remove contact lenses during rinsing if possible\n- Seek medical attention if irritation persists (P337+P313)\n\n**First Aid — Inhalation**\n- Move affected person to fresh air immediately\n- Remove contaminated clothing; allow rest in comfortable position\n- Seek medical advice if effects persist\n\n**First Aid — Ingestion**\n- Rinse mouth with water; do not induce vomiting\n- Give conscious person a glass of water; do not give anything by mouth to unconscious person\n- Seek medical advice for all ingestion incidents\n\n**Fire & Combustibility**\n- Fresh paste form: Non-combustible\n- Dried residue: Can burn if ignited\n- Suitable extinguishing agents: Water fog or fine spray, alcohol-resistant foam, standard foam, CO2, dry chemical powder\n\n**Spill Response**\n- Product is slippery when spilt — clean up immediately\n- Small spills: Use absorbent media (clean rags or paper towels); seal waste in labelled containers\n- Large spills: Clear unprotected personnel; wear full PPE; use absorbent materials and containment measures\n- Dispose of waste in accordance with local regulations (P501)\n\n**Storage & Handling**\n- Protect from frost; freeze-thaw cycles damage product structure\n- Keep container tightly sealed between uses\n- Wash hands before eating, drinking, smoking, or using the toilet\n- First aiders treating exposed persons must wear PPE (safety shoes, overalls, gloves, safety glasses)\n- Not suitable for individuals with known isothiazolinone sensitivity\n- Use only with strict contamination controls in environments with young children\n\n**Application Notes (Manufacturer-Specified)**\n- Apply to clean, dry substrate free of loose material, dust, grease, and coating failures\n- Use putty knife or filling knife\n- Apply in multiple layers for deep voids — single thick-layer application causes extended drying and shrinkage\n- Work in a well-ventilated area\n\n---\n\n### General Product Claims\n\n- \"Delivers professional results for homeowners and tradespeople\"\n- \"Cuts through the complexity of two-part systems or powder-based fillers\"\n- \"Delivers perfect visible results every time\"\n- \"The paste spreads smoothly while maintaining enough body to fill voids without sagging\"\n- \"Goes on cleanly and stays exactly where you put it\"\n- \"Delivers superior performance within a clearly defined application range\"\n- \"The ready-mixed format prioritises immediate convenience over extended shelf life — an intelligent trade-off for intermittent residential use\"\n- \"When you use the right product in the right application, the results speak for themselves. That's the Selleys standard — reliable, proven, and built on decades of expertise\"\n- \"Knowing this upfront means you handle the product correctly and get the job done safely\"\n- \"A prepared first aider is an effective one\"\n\n<!-- nor-3601:relationships-begin -->\n## Related Products & Brand Context\n\nSelleys No More Cracks Exterior Wood Filler sits within the **Selleys** brand, an Australian home repair and maintenance label with a broad range spanning adhesives, sealants, putties, and fillers. Within that portfolio, this product occupies the **putty and fillers** segment, specifically the wall and wood filler subcategory — as reflected in its canonical category of *Home & Garden > Wood Fillers & Repair*. Selleys positions this product alongside its wider \"No More Cracks\" line, which the brand name signals is a family of crack-repair solutions, though the knowledge graph available here specifically documents the exterior wood variant in a 450 g tub.\n\nWhat distinguishes this filler from interior or general-purpose alternatives is its weather-resistant, flexible formulation. Where a standard interior filler is rigid once cured and vulnerable to moisture, this product is engineered to flex as timber expands and contracts with seasonal temperature and humidity changes — a critical requirement for outdoor applications such as siding, exterior trim, and outdoor furniture. It dries to a natural pine colour, which means it is best suited to timber surfaces where paint, stain, or varnish will be applied over the top rather than left exposed.\n\nSomeone using this product for an exterior timber repair is likely to reach for a few complementary items. Sandpaper or a sanding block is a practical companion, since the filler is explicitly designed to be easy to sand to a smooth finish once cured. For larger or deeper repairs — the product supports applications up to 10 mm deep — a putty knife or flexible filling blade will make application cleaner. Once the filler is sanded back, an exterior timber paint or stain would be the logical next step to protect the repair and match the surrounding surface. Because the product requires no priming before filling, a dedicated timber primer is not a prerequisite, which simplifies the overall repair workflow.\n\nIn short, Selleys No More Cracks Exterior Wood Filler is a specialised outdoor repair product within the Selleys filler range, differentiated by its flexibility and weather resistance, and typically used as part of a broader exterior timber maintenance or painting project.\n<!-- nor-3601:relationships-end -->\n",
  "geography": {},
  "metadata": {},
  "publishedAt": "",
  "workspaceId": "77ac21fe-85f0-45c0-8279-2da0c52dc749",
  "_links": {
    "canonical": "https://directory.selleys.com.au/putty-fillers/wall-filler/selleys-no-more-cracks-exterior-wood-filler/"
  },
  "productInfo": {
    "stock": true
  },
  "productFeedItemId": "41f79167-59c7-43c5-be26-3d95a731cbb3"
}