{
  "id": "adhesives/contact-adhesives/selleys-kwik-grip-horizontal-contact-adhesive-guide",
  "title": "Selleys Kwik Grip Horizontal Contact Adhesive",
  "slug": "adhesives/contact-adhesives/selleys-kwik-grip-horizontal-contact-adhesive-guide",
  "description": "",
  "category": "",
  "content": "## AI Summary\n\n**Product:** Selleys Kwik Grip Horizontal\n**Brand:** Selleys (a division of DuluxGroup (Australia) Pty Ltd)\n**Category:** Solvent-based contact adhesive\n**Primary Use:** Professional-grade permanent bonding of horizontal surfaces across a wide range of substrates including laminated plastics, rubber, leather, canvas, wood, cork, hardboard, metals, and fibrous cement sheeting.\n\n### Quick Facts\n- **Best For:** Large-format horizontal installations and professional or DIY applications requiring immediate, high-strength bonds without clamping\n- **Key Benefit:** Instant permanent bond on first contact — no clamping, no extended drying time required\n- **Form Factor:** Solvent-based liquid adhesive available in eight sizes from 50mL to 150kg Expandable\n- **Application Method:** Coat both surfaces, allow to become touch-dry, then bring into firm deliberate contact\n\n### Common Questions This Guide Answers\n1. What surfaces is Kwik Grip Horizontal compatible with? → Laminated plastics, rubber, leather, canvas, wood, cork, hardboard, metals, and fibrous cement sheeting\n2. What safety precautions are required during use? → Protective gloves, clothing, eye and face protection, and a respirator are mandatory; use only outdoors or in well-ventilated areas (P271); no open flames or smoking\n3. What should you do in an emergency exposure situation? → For inhalation remove from area immediately; for skin flush with water for at least 15 minutes; for eyes rinse cautiously for several minutes; contact Australian Poison Information Centre on 131 126 or New Zealand on 0800 764 766\n\n---\n\n## Product Overview and Purpose\n\nSelleys Kwik Grip Horizontal is a professional-grade contact adhesive built specifically for horizontal surface applications where materials need an immediate, high-strength bond (SDS). This solvent-based adhesive bonds permanently across a wide range of substrates — laminated plastics, rubber, leather, canvas, wood, cork, hardboard, metals, and fibrous cement sheeting (SDS). When you need a bond that holds from the first contact, this is the product.\n\nUnlike general-purpose adhesives that cure slowly or demand clamping, Kwik Grip Horizontal works the way contact adhesives should. Coat both surfaces, let them become touch-dry, bring them together — and the bond forms instantly. No clamping. No waiting. Just a strong, permanent result the first time. That instant grab makes it particularly useful for large-format horizontal installations where maintaining pressure across an entire bonded area simply isn't practical.\n\nThe product carries a Dangerous Good Class 3 classification because of its highly flammable nature, and it is hazardous according to Safe Work Australia GHS 7 criteria (SDS). This reflects the solvent-based chemistry that gives Kwik Grip Horizontal its rapid bonding performance and broad material compatibility. Understanding these classifications is part of using the product correctly and safely.\n\n## Available Sizes and Product Codes\n\nKwik Grip Horizontal comes in eight package sizes, covering everything from small household repairs to industrial-scale installations (SDS):\n\n- **50mL** (Product Code 100039): Ideal for small repairs and testing\n- **100mL** (Product Code 100044): Good for craft and minor household projects\n- **250mL** (Product Code 100045): A practical size for moderate bonding tasks\n- **500mL** (Product Code 100043): A professional size for larger single-day applications\n- **1L** (Product Code 100042): Multi-project volume for regular users\n- **2L** (Product Code 100041): Workshop and contractor format\n- **4L** (Product Code 100043): High-volume professional applications\n- **150kg Expandable** (Product Code 100334): Industrial bulk supply for manufacturing environments\n\nEvery size uses the same formulation, so you get consistent results regardless of the volume you're working with. Kwik Grip Horizontal is manufactured and distributed by Selleys, a division of DuluxGroup (Australia) Pty Ltd, based in Clayton, Victoria (SDS).\n\n## Chemistry and Composition\n\nThe performance of Kwik Grip Horizontal comes from a three-component solvent system blended with elastomeric resins — a formulation built for fast tack development, strong substrate wetting, and a final bond that holds. Here's what's inside and why it matters (SDS):\n\n**Primary Solvent — n-Propyl Acetate (CAS 109-60-4)**: At 30–60% by weight, n-propyl acetate is the main carrier solvent. It gives the adhesive its workable consistency during application, supports rapid tack development through controlled evaporation, and works with the elastomeric polymer base. Its evaporation rate suits horizontal applications well, giving you enough open time to position larger materials accurately before the bond sets.\n\n**Secondary Solvent — Naphtha, Petroleum, Hydrotreated Light (CAS 64742-49-0)**: Present at 10–30% by weight, this refined petroleum fraction contributes solvent power and influences viscosity. The hydrotreating process reduces aromatic content, making it well-suited to adhesive formulations while maintaining strong solvency for the polymer components.\n\n**Tertiary Solvent — Methyl Ethyl Ketone (CAS 78-93-3)**: At 1–10% by weight, MEK is a fast-evaporating co-solvent that accelerates the initial drying phase. It improves the adhesive's ability to wet diverse substrates and drives the rapid surface tack development that contact bonding depends on.\n\n**Non-Hazardous Components**: The remaining balance includes ingredients below reporting limits or classified as non-hazardous — including the elastomeric polymer base that delivers final bond strength and flexibility (SDS).\n\nThis solvent-polymer architecture explains both the product's flammability classification and its ability to bond dissimilar materials reliably. As the solvents evaporate, polymer chains entangle with substrate surfaces, creating mechanical interlocking at the microscopic level. That's the science behind a bond you can rely on.\n\n## Hazard Classification and Safety Profile\n\nKwik Grip Horizontal carries a \"Danger\" signal word, reflecting multiple hazard categories that every user must understand before handling (SDS). Knowing the hazards means you can take the right precautions and get the job done safely.\n\n### Flammability hazards\n\nThe product is classified as a Flammable Liquid Category 2, carrying hazard statement H225: \"Highly flammable liquid and vapour\" (SDS). The high solvent content creates significant fire risk during application — particularly during the evaporation phase, when solvent vapours concentrate in the work area. This classification demands strict fire prevention protocols. Follow them without exception.\n\n### Health hazards\n\n**Skin effects**: Classified under Skin Corrosion/Irritation Category 2, Kwik Grip Horizontal causes skin irritation on direct contact (SDS). Prolonged or repeated exposure can lead to dermatitis, as organic solvents strip natural oils from the skin. Protective gloves are non-negotiable.\n\n**Eye effects**: The product meets Eye Damage/Irritation Category 2A criteria, meaning it causes serious eye irritation that may require medical attention (SDS). Both solvent vapours and liquid contact pose risks to ocular tissues. Eye protection must be worn at all times during use.\n\n**Respiratory and systemic effects**: Classified for Specific Target Organ Toxicity (Single Exposure) Category 3 for narcotic effects (SDS). Inhaling concentrated vapours can cause dizziness, drowsiness, and headache — and in extreme cases, loss of consciousness. This is the central nervous system depression effect common to organic solvent exposure, and the reason adequate ventilation is a firm requirement, not a suggestion.\n\n### Required personal protective equipment\n\nGiven these hazards, the product requires protective gloves, protective clothing, eye and face protection, and a suitable respirator during use (SDS). Precautionary statements require use only outdoors or in well-ventilated areas (P271), with breathing of dust, fume, gas, mist, vapours, or spray actively avoided (P261) (SDS). These aren't optional measures — they're the standard for working with this product correctly.\n\n## Application Requirements and Safety Protocols\n\n### Workspace preparation\n\nBefore opening any container, establish explosion-proof conditions in your workspace. Precautionary statements P240, P241, P242, and P243 collectively require grounding and bonding of containers and receiving equipment, explosion-proof electrical and ventilating equipment, non-sparking tools, and active measures to prevent static discharges (SDS). These controls address the Category 2 flammability hazard posed by solvent vapours, and they must be in place before work begins.\n\nKeep the workspace clear of heat, sparks, open flames, and hot surfaces. Smoking is strictly prohibited (P210) (SDS). Adequate ventilation is a mandatory control measure specified in precautionary statement P271 (SDS) — not a recommendation, but a requirement for safe, compliant use.\n\n### Handling precautions\n\nKeep containers tightly closed whenever they're not in active use (P233) to minimise vapour release and evaporation (SDS). After handling, wash hands, face, and all exposed skin thoroughly (P264) — dermal absorption and irritation are real risks with skin contact (SDS).\n\nKeep the product out of reach of children (P102), and read all instructions carefully before starting any job (P103) (SDS). These precautions apply to every package size, from the 50mL format through to the 150kg industrial bulk supply.\n\n### Dispensing and application\n\nWhen transferring adhesive from larger containers, use vessels rated for flammable liquids and label them correctly. The application process is straightforward: coat both surfaces to be bonded, allow solvent evaporation until surfaces become touch-dry but remain tacky, then bring surfaces into firm, deliberate contact. The horizontal formulation is built for applications where gravity works with the bonding process rather than against it. Align carefully before joining surfaces, because the instant grab that makes this product so effective also means repositioning after contact isn't an option.\n\n## Emergency Response Procedures\n\n### Inhalation exposure\n\nIf someone is overcome by vapours, remove them from the exposure area immediately — rescuers must take care not to become casualties themselves (SDS). Remove contaminated clothing and loosen remaining garments. Allow the patient to rest comfortably, keep them warm, and monitor until fully recovered (SDS). If effects persist, seek medical advice. Always have the product container or label available for healthcare providers (P101) (SDS).\n\nIf you feel unwell at any point during or after use, contact the Australian Poison Information Centre on 131 126, New Zealand on 0800 764 766, or a doctor (P312) (SDS). Act promptly; don't wait to see if symptoms resolve on their own.\n\n### Skin contact\n\nFor skin or hair contact, remove all contaminated clothing immediately and flush skin and hair with running water (P303+P361+P353) (SDS). Continue flushing until advised to stop by the Poisons Information Centre or a doctor, or for at least 15 minutes, then seek medical care (SDS). If skin irritation develops, obtain medical advice or attention (P332+P313) (SDS).\n\nContaminated clothing must be removed and washed thoroughly before reuse (P362+P364) (SDS). For significant contamination, drench the affected area with water immediately and continue flushing with plenty of water and soap if the material proves insoluble (SDS).\n\n### Eye contact\n\nIf the adhesive enters the eyes, rinse cautiously with water for several minutes (P305+P351+P338) (SDS). Remove contact lenses if present and straightforward to remove, then continue rinsing (SDS). If eye irritation continues after thorough rinsing, seek medical advice or attention without delay (P337+P313) (SDS). The Category 2A eye irritation classification means this is a serious exposure — prompt, thorough decontamination is essential.\n\n## Storage and Disposal Requirements\n\n### Storage conditions\n\nStorage must comply with precautionary statement P403+P235: store in a well-ventilated place and keep cool (SDS). The combination of flammability and vapour pressure makes temperature control and air circulation critical. Storage areas must meet the requirements for Class 3 Dangerous Goods, with clear separation from ignition sources, incompatible materials, and heat sources.\n\nKeep containers tightly sealed during storage (P233) (SDS). Partially used containers are a particular concern — headspace vapours can reach flammable concentrations if containers aren't properly sealed after every use.\n\n### Disposal requirements\n\nDispose of both contents and containers in accordance with local, regional, national, and international regulations (P501) (SDS). Empty containers can retain residual adhesive and flammable vapours, which means they require treatment as hazardous waste in most jurisdictions. Check with local waste management authorities for the specific disposal protocols that apply to your location and container size.\n\nThe 150kg expandable format requires industrial waste handling procedures. It must never be discharged to drains, waterways, or landfills without appropriate treatment and proper authorisation.\n\n## Optimal Use Conditions and Best Practices\n\n### Surface preparation\n\nStrong results start with proper surface preparation. Both substrates must be clean, dry, and free from oils, dust, or release agents that could prevent the adhesive from wetting the surface effectively. The broad substrate compatibility of Kwik Grip Horizontal — laminated plastics, rubber, leather, canvas, wood, cork, hardboard, metals, and fibrous cement sheeting (SDS) — reflects a formulation built to wet diverse surface energies. But no adhesive performs well on a contaminated surface. Prepare correctly and the bond will follow.\n\n### Application technique\n\nThe horizontal designation tells you exactly what this formulation is built for — applications where bonded surfaces remain parallel to the ground during and after assembly. The instant grab upon contact is one of the product's greatest strengths, and it demands accurate alignment before surfaces meet. For horizontal applications such as laminate benchtops, flooring materials, or flat panel assemblies, Kwik Grip Horizontal delivers the handling characteristics you need, without the slump or drip concerns of vertical-grade formulations. Plan your placement, position with confidence, and press firmly.\n\n### Environmental conditions\n\nApply at moderate temperatures in well-ventilated conditions. Cold temperatures slow solvent evaporation, extending open time but delaying adequate tack development. Excessive heat accelerates evaporation and can cause tack to develop faster than your positioning allows. The mandatory ventilation requirement (P271) (SDS) means outdoor application or mechanical ventilation isn't a preference — it's required for safe, compliant use. Set up your workspace correctly and the product will perform as it should.\n\n## How This Product Fits in the Range\n\nKwik Grip Horizontal is one of several purpose-built variants within Selleys' Kwik Grip Contact Adhesive range. Each formulation is built for specific application orientations and environments.\n\n**Kwik Grip Vertical** is built for vertical surfaces, with near-instant bonding upon contact and viscosity suited to applications where gravity works against the bond line.\n\n**Kwik Grip Waterbased** serves interior applications where solvent emissions need to be kept to a minimum. It trades some of the broad substrate compatibility and immediate strength of the solvent-based variants for a lower-emission profile suited to enclosed environments.\n\n**Kwik Grip Sprax** delivers spray application for large-area coverage — particularly useful in upholstery, automotive trim, and other applications where brush or roller application would slow the job down.\n\nEvery Kwik Grip variant shares heat resistance up to 130°C and a flexibility that prevents the adhesive from becoming rigid when dry, making them well-suited to bonding large flat surfaces across the materials listed in the recommended use statement. The horizontal formulation specifically optimises handling characteristics for applications where surfaces remain parallel to the ground during assembly.\n\nWithin the broader Contact Adhesives category, the Kwik Grip range is Selleys' primary solution for professionals and DIYers who need permanent, immediate-strength bonds across diverse material combinations — backed by more than 80 years of results. If it's Selleys, it works.\n\n## References\n\n### Source Documents\n- SELLEYS_KWIK_GRIP_HORIZONTAL_-AUS_GHS.pdf (canonical)\n\n### Related Products in the Range\n- Kwik Grip Vertical\n- Kwik Grip Waterbased\n- Kwik Grip Sprax\n\n## Frequently Asked Questions\n\nWhat is Selleys Kwik Grip Horizontal: A professional-grade contact adhesive for horizontal surfaces\n\nWhat type of adhesive is Kwik Grip Horizontal: Solvent-based contact adhesive\n\nIs Kwik Grip Horizontal permanent: Yes, it forms permanent bonds\n\nIs it suitable for vertical surfaces: No, it is formulated for horizontal surfaces only\n\nWhat makes it a \"contact\" adhesive: Bond forms instantly when two coated surfaces touch\n\nDoes it require clamping: No, no clamping is required\n\nDoes it require extended drying time after joining: No, bond forms on first contact\n\nWho manufactures Kwik Grip Horizontal: Selleys, a division of DuluxGroup (Australia) Pty Ltd\n\nWhere is Selleys based: Clayton, Victoria, Australia\n\nIs it suitable for laminated plastics: Yes\n\nIs it suitable for rubber: Yes\n\nIs it suitable for leather: Yes\n\nIs it suitable for canvas: Yes\n\nIs it suitable for wood: Yes\n\nIs it suitable for cork: Yes\n\nIs it suitable for hardboard: Yes\n\nIs it suitable for metals: Yes\n\nIs it suitable for fibrous cement sheeting: Yes\n\nCan it bond dissimilar materials together: Yes\n\nWhat is the smallest available size: 50mL (Product Code 100039)\n\nWhat is the largest consumer size: 4L (Product Code 100043)\n\nIs there an industrial bulk format available: Yes, 150kg Expandable (Product Code 100334)\n\nHow many sizes is Kwik Grip Horizontal available in: Eight sizes\n\nWhat is the product code for the 250mL size: 100045\n\nWhat is the product code for the 1L size: 100042\n\nWhat is the product code for the 2L size: 100041\n\nWhat is the product code for the 500mL size: 100043\n\nWhat is the product code for the 100mL size: 100044\n\nWhat is the product code for the 50mL size: 100039\n\nWhat is the product code for the 150kg Expandable: 100334\n\nWhat is the primary solvent in Kwik Grip Horizontal: n-Propyl Acetate (CAS 109-60-4)\n\nWhat percentage is n-Propyl Acetate by weight: 30–60%\n\nWhat is the secondary solvent: Naphtha, Petroleum, Hydrotreated Light (CAS 64742-49-0)\n\nWhat percentage is the petroleum naphtha by weight: 10–30%\n\nWhat is the tertiary solvent: Methyl Ethyl Ketone (CAS 78-93-3)\n\nWhat percentage is MEK by weight: 1–10%\n\nWhat provides the final bond strength: Elastomeric polymer base\n\nIs the polymer base hazardous: No, it is non-hazardous\n\nWhat is the Dangerous Goods classification: Class 3 (Flammable Liquid)\n\nWhat is the flammability category: Flammable Liquid Category 2\n\nWhat hazard statement applies to flammability: H225 — Highly flammable liquid and vapour\n\nWhat signal word does the product carry: Danger\n\nIs it hazardous according to Safe Work Australia GHS 7: Yes\n\nDoes it cause skin irritation: Yes, classified Skin Corrosion/Irritation Category 2\n\nCan prolonged skin contact cause dermatitis: Yes\n\nDoes it cause eye irritation: Yes, classified Eye Damage/Irritation Category 2A\n\nCan vapour inhalation cause narcotic effects: Yes, classified STOT Single Exposure Category 3\n\nWhat narcotic symptoms can vapour exposure cause: Dizziness, drowsiness, and headache\n\nCan extreme vapour exposure cause loss of consciousness: Yes\n\nAre protective gloves required: Yes\n\nIs eye and face protection required: Yes\n\nIs a respirator required during use: Yes\n\nIs protective clothing required: Yes\n\nMust it be used in a well-ventilated area: Yes, precautionary statement P271 requires it\n\nIs outdoor use recommended: Yes, or in well-ventilated areas\n\nIs smoking permitted during use: No, strictly prohibited (P210)\n\nAre open flames permitted near the product during use: No\n\nAre non-sparking tools required: Yes (P242)\n\nIs grounding of containers required: Yes (P240)\n\nIs explosion-proof ventilation equipment required: Yes (P241)\n\nMust static discharge be prevented: Yes (P243)\n\nMust containers be kept tightly closed when not in use: Yes (P233)\n\nShould hands be washed after handling: Yes, thoroughly (P264)\n\nIs the product safe for children to access: No, keep out of reach of children (P102)\n\nShould instructions be read before use: Yes (P103)\n\nWhat is the first step of the bonding process: Coat both surfaces with adhesive\n\nWhat is the second step of the bonding process: Allow surfaces to become touch-dry\n\nWhat is the third step of the bonding process: Bring surfaces into firm, deliberate contact\n\nCan surfaces be repositioned after contact: No\n\nWhy can't surfaces be repositioned: Bond forms instantly on contact\n\nDoes cold temperature affect performance: Yes, it slows solvent evaporation\n\nDoes excessive heat affect performance: Yes, it accelerates tack development\n\nMust surfaces be clean before application: Yes\n\nMust surfaces be dry before application: Yes\n\nMust surfaces be free from oils before application: Yes\n\nWhat should you do if overcome by vapours: Remove from exposure area immediately\n\nWhat position should an inhalation casualty rest in: The most comfortable position available\n\nWho should rescuers protect during vapour rescue: Themselves from becoming casualties\n\nWhat is the Australian Poison Information Centre number: 131 126\n\nWhat is the New Zealand Poison Information Centre number: 0800 764 766\n\nWhat is the first action for skin contact: Remove contaminated clothing immediately\n\nHow long should skin be flushed with water after contact: At least 15 minutes\n\nShould contaminated clothing be rewashed before reuse: Yes (P362+P364)\n\nWhat is the first action for eye contact: Rinse cautiously with water for several minutes\n\nShould contact lenses be removed before eye rinsing: Yes, if straightforward to remove\n\nWhat should you do if eye irritation persists after rinsing: Seek medical attention (P337+P313)\n\nWhat storage condition is required for temperature: Keep cool (P403+P235)\n\nWhat storage condition is required for air: Store in a well-ventilated place (P403+P235)\n\nCan containers be disposed of in general waste: No, treat as hazardous waste\n\nHow should contents and containers be disposed of: Per local, regional, national, and international regulations (P501)\n\nCan the 150kg format be discharged to drains: No\n\nCan the 150kg format be discharged to waterways without treatment: No\n\nWhat is the maximum heat resistance shared across the Kwik Grip range: 130°C\n\nDoes Kwik Grip Horizontal remain flexible when dry: Yes\n\nWhat is Kwik Grip Vertical designed for: Vertical surface applications\n\nWhat is Kwik Grip Waterbased designed for: Interior low-emission applications\n\nWhat does Kwik Grip Sprax offer: Spray application capability\n\nIs Kwik Grip Horizontal suitable for large-format horizontal installations: Yes\n\nHow long has Selleys been established: More than 80 years\n\n---\n\n## Label Facts Summary\n\n> **Disclaimer:** All facts and statements below are general product information, not professional advice. Consult relevant experts for specific guidance.\n\n### Verified Label Facts\n\n**Product Identity**\n- Product Name: Selleys Kwik Grip Horizontal\n- Product Type: Solvent-based contact adhesive\n- Manufacturer: Selleys, a division of DuluxGroup (Australia) Pty Ltd\n- Manufacturer Location: Clayton, Victoria, Australia\n\n**Available Sizes and Product Codes**\n- 50mL — Product Code 100039\n- 100mL — Product Code 100044\n- 250mL — Product Code 100045\n- 500mL — Product Code 100043\n- 1L — Product Code 100042\n- 2L — Product Code 100041\n- 4L — Product Code 100043\n- 150kg Expandable — Product Code 100334\n\n**Composition (Source: SDS)**\n- n-Propyl Acetate (CAS 109-60-4): 30–60% by weight — primary solvent\n- Naphtha, Petroleum, Hydrotreated Light (CAS 64742-49-0): 10–30% by weight — secondary solvent\n- Methyl Ethyl Ketone (CAS 78-93-3): 1–10% by weight — tertiary solvent\n- Elastomeric polymer base: remaining balance — classified non-hazardous\n\n**Hazard Classification (Source: SDS, GHS 7)**\n- Dangerous Goods Classification: Class 3 (Flammable Liquid)\n- Flammability Category: Flammable Liquid Category 2\n- Hazard Statement: H225 — Highly flammable liquid and vapour\n- Signal Word: Danger\n- Hazardous per Safe Work Australia GHS 7 criteria: Yes\n- Skin Corrosion/Irritation: Category 2\n- Eye Damage/Irritation: Category 2A\n- Specific Target Organ Toxicity (Single Exposure): Category 3 — narcotic effects\n\n**Precautionary Statements (Source: SDS)**\n- P102: Keep out of reach of children\n- P103: Read and follow all instructions before use\n- P210: Keep away from heat, sparks, open flames, hot surfaces — no smoking\n- P233: Keep container tightly closed\n- P240: Ground and bond container and receiving equipment\n- P241: Use explosion-proof electrical and ventilating equipment\n- P242: Use non-sparking tools\n- P243: Take precautionary measures against static discharge\n- P261: Avoid breathing dust, fume, gas, mist, vapours, or spray\n- P264: Wash hands, face, and exposed skin thoroughly after handling\n- P271: Use only outdoors or in a well-ventilated area\n- P303+P361+P353: If on skin or hair — remove contaminated clothing immediately and flush with running water\n- P305+P351+P338: If in eyes — rinse cautiously with water for several minutes; remove contact lenses if present and easy to do; continue rinsing\n- P312: Call a Poison Information Centre or doctor if unwell\n- P332+P313: If skin irritation occurs — seek medical advice or attention\n- P337+P313: If eye irritation persists — seek medical advice or attention\n- P362+P364: Remove contaminated clothing and wash before reuse\n- P403+P235: Store in a well-ventilated place; keep cool\n- P501: Dispose of contents and container per local, regional, national, and international regulations\n\n**Required Personal Protective Equipment (Source: SDS)**\n- Protective gloves: Required\n- Protective clothing: Required\n- Eye and face protection: Required\n- Suitable respirator: Required\n\n**Emergency Contacts**\n- Australian Poison Information Centre: 131 126\n- New Zealand Poison Information Centre: 0800 764 766\n\n**Approved Substrates (Source: SDS)**\n- Laminated plastics, rubber, leather, canvas, wood, cork, hardboard, metals, fibrous cement sheeting\n\n**Specified Application Orientation**\n- Horizontal surfaces only\n\n**Skin Flush Duration (Source: SDS)**\n- Minimum 15 minutes continuous flushing following skin contact\n\n**Storage Requirements (Source: SDS)**\n- Well-ventilated location; cool temperature; containers tightly sealed; separated from ignition sources and incompatible materials\n\n**Disposal Requirements (Source: SDS)**\n- Contents and containers: treat as hazardous waste per applicable regulations (P501)\n- 150kg format: must not be discharged to drains, waterways, or landfill without appropriate treatment and authorisation\n\n**Shared Range Specification**\n- Maximum heat resistance across Kwik Grip range: 130°C\n- Remains flexible when dry: Yes\n\n**Source Document**\n- SELLEYS_KWIK_GRIP_HORIZONTAL_-AUS_GHS.pdf (canonical SDS)\n\n---\n\n### General Product Claims\n\n- Described as \"professional-grade\" contact adhesive\n- Claimed to deliver \"permanent bonds\" across listed substrates\n- Claimed to form bonds \"instantly\" on first contact with no clamping required\n- Described as \"especially valuable for large-format horizontal installations\"\n- Solvent evaporation rate described as \"well-suited to horizontal applications\" providing adequate open time for positioning\n- Hydrotreating of petroleum naphtha described as making it \"well-suited to adhesive formulations\"\n- MEK described as enhancing \"ability to wet diverse substrates\"\n- Bond mechanism described as polymer chain entanglement creating \"mechanical interlocking at the microscopic level\"\n- Kwik Grip Vertical described as offering \"near-instant bonding\" with viscosity \"optimised for vertical applications\"\n- Kwik Grip Waterbased described as suited to \"enclosed environments\" with \"lower-emission profile\"\n- Kwik Grip Sprax described as \"particularly valuable in upholstery, automotive trim\" applications\n- Selleys described as a \"heritage brand with more than 80 years of proven results\"\n- Tagline: \"If it's Selleys, it works\"\n- Size descriptions (\"ideal for,\" \"perfect for,\" \"go-to size\") are marketing characterisations, not label specifications\n- Statement that \"every size carries the same proven formulation\" — not independently verified from label data\n- Claim that product delivers \"consistent, professional results regardless of volume\" — marketing assertion\n\n<!-- nor-3601:relationships-begin -->\n## Related Products & Brand Context\n\nSelleys Kwik Grip Horizontal Contact Adhesive sits within the **Kwik Grip** product line from Selleys, a brand operating as a division of DuluxGroup (Australia) Pty Ltd. Selleys is broadly associated with sealants, adhesives, fillers, and household repair products sold across Australia and New Zealand. Within that range, the Kwik Grip line represents Selleys' contact adhesive offering — products designed for high-strength bonding without clamping, where both surfaces are coated and pressed together once the adhesive reaches the right tack level.\n\nThe \"Horizontal\" designation in this product's name signals a specific formulation choice: a thicker, solvent-based formula engineered to reduce running and stringing when applied to flat, horizontal surfaces such as benchtops and flooring substrates. This makes it a distinct variant within the contact adhesive category rather than a general-purpose version. The product sits under the **Home & Garden > Adhesives & Glues** category hierarchy, specifically within contact adhesives, and is positioned for both trade and consumer use — evidenced by its wide size range, which spans from a 50mL tube for small repairs all the way up to a 150kg bulk format suited to commercial or industrial procurement.\n\nBecause this adhesive bonds materials including laminated plastics, timber, cork, rubber, leather, canvas, metals, and fibrous cement sheeting, buyers using it for benchtop or flooring installations are likely to also need surface preparation products (such as cleaners or primers to ensure substrates are dust- and grease-free before bonding), as well as application tools like brushes or rollers suited to solvent-based adhesives. It is also worth noting that as a flammable liquid (UN 1133, Dangerous Goods Class 3), storage and transport considerations place it alongside other solvent-based products that require ventilated storage and appropriate personal protective equipment during handling.\n<!-- nor-3601:relationships-end -->\n",
  "geography": {},
  "metadata": {},
  "publishedAt": "",
  "workspaceId": "77ac21fe-85f0-45c0-8279-2da0c52dc749",
  "_links": {
    "canonical": "https://directory.selleys.com.au/adhesives/contact-adhesives/selleys-kwik-grip-horizontal-contact-adhesive-guide/"
  },
  "productInfo": {
    "stock": true
  },
  "productFeedItemId": "c1e1567e-3ff0-4235-ab86-e87a9f12a815"
}